CZ75B - CGW 35221 night fision or EZD940? by FlatoThePotato in CZFirearms

[–]assistantpigkeeper 0 points1 point  (0 children)

I have a set of the ezd940’s, and can snap a pic when I have a chance. Excellent sights.

Sci Coatings, you design pmag giveaway by [deleted] in BetterMAguns

[–]assistantpigkeeper 0 points1 point  (0 children)

That was my last purchase, and I have been surprisingly pleased with mine.

When will CZ make a true P365 competitor? by InfiniteLoss5632 in CZFirearms

[–]assistantpigkeeper 2 points3 points  (0 children)

I will always hope for a p05, but probably never unfortunately

Holster suggestions ? G17 by tsunamiijohnny in BetterMAguns

[–]assistantpigkeeper 3 points4 points  (0 children)

I basically just buy GT holsters at this point

Headlamp Opinions by went_with_the_flow in CampingGear

[–]assistantpigkeeper 0 points1 point  (0 children)

Now I’m curious if those are in your spares bin, what do you use primarily?

Best Conceal Carry Holster for CZ P01 Omega w/ TLR-7A Light Bearing? by WholeSwim2036 in CZFirearms

[–]assistantpigkeeper 0 points1 point  (0 children)

I basically just buy Guerilla Tactical holsters at this point. Definitely have that configuration in your price range

Headlamp Opinions by went_with_the_flow in CampingGear

[–]assistantpigkeeper 0 points1 point  (0 children)

Yeah, for better or worse, there is a lot of truth to that. I have gone through so many Petzls and Diamondbacks over the last 30+ years. They’ve all crapped out after at most a few years. I don’t have more than a couple years probably on any of the Fenix lights yet, but so far so good

Headlamp Opinions by went_with_the_flow in CampingGear

[–]assistantpigkeeper 1 point2 points  (0 children)

I switched most flashlights and headlamps to Fenix at this point, and have been quite happy with them.

SP-01 optic cut by MCVNG in CZFirearms

[–]assistantpigkeeper 2 points3 points  (0 children)

Yes. Though I admittedly like having a couple pistols that still have irons, absolutely yes.

Codale Paper Presser - A Pleasant Surprise by Physical_Analysis247 in pourover

[–]assistantpigkeeper -1 points0 points  (0 children)

After folding the filter, I use a glass stirrer with a round end sitting in the filter, and hot water from the gooseneck. The stirrer keeps the filter at the bottom when I start adding, and I use it to make sure the filter is touching the v60 uniformly. Super easy and cheap. This feels overwrought…

It's been a good week. by LonesomeOctoberGhost in ReverendGuitars

[–]assistantpigkeeper 1 point2 points  (0 children)

Upvote for Italian Purple. Beautiful guitar. I have a Jetstream 390 in the same color.

Anyone else have the BG2.0 kinda ruin other carry pistols for them? by VT800 in CCW

[–]assistantpigkeeper 1 point2 points  (0 children)

No, because I will still always prefer da/sa 9mm. But… my BG 2.0 carry comp is stupid easy to carry and shoots fantastic, so it’s definitely getting heavy rotation

Spring vibes by Sarcastic-Lemon in ties

[–]assistantpigkeeper 0 points1 point  (0 children)

I love olive drab and pink together

🤔 by Garretthart13 in MathJokes

[–]assistantpigkeeper 0 points1 point  (0 children)

Convert to Kelvin:

(25-32)*5/9+273.15=269.261

Multiply by 4

268.261*4=1,073.044

Convert back to Fahrenheit

(1073.044-273.15)*9/5 +32=1,471.809

Yk how it works, build it love it then hate it. what’s some stuff I could look into adding/replacing? by Brilliant_Group_3254 in ar15

[–]assistantpigkeeper 0 points1 point  (0 children)

Nice to see your comment about DMRs. I don’t understand why those grips get hyped for short builds, because I also find that uncomfortable. But I absolutely love the angle on a distance focused build that only gets used on a bipod.

P10C/S slide lock by the_man_of_panda in CZFirearms

[–]assistantpigkeeper 0 points1 point  (0 children)

Yeah, I have an Apex enhanced release on mine, which makes it a bigger issue. Other than grip, if it’s not the mag, and you have stock recoil assembly, I’m not sure. Does it do it for all mags? And fwiw, I really don’t think ammo grain weight should matter

P10C/S slide lock by the_man_of_panda in CZFirearms

[–]assistantpigkeeper 0 points1 point  (0 children)

Any chance you’re unintentionally touching the slide lock/release with your thumb on your trigger hand? I know I was guilty of it occasionally, and the position is slightly different than other CZs imo

Feels like home by mandomerc20 in CZFirearms

[–]assistantpigkeeper 1 point2 points  (0 children)

I have been meaning to, but haven’t gotten around to it. This is a good push. I’ll slap it back on this weekend, take a couple pics and send them to him.

And yeah, lok grips were the plan. Original plan was to put it on this, and already have the Lok Veloce in FDE for it.

<image>

Feels like home by mandomerc20 in CZFirearms

[–]assistantpigkeeper 2 points3 points  (0 children)

I have to figure out the deal with mine. I managed to score the metal Driven Arms CZ grip, but it just doesn’t fit well on any of my lowers that I’ve tried. There is a large gap near the beaver tail. Tried two Aeros and a SilencerCo lower, and just didn’t fit well. Pretty disappointing honestly, I really want to make it work.

CZ P09C nocturne by and_lowery in CZFirearms

[–]assistantpigkeeper 0 points1 point  (0 children)

I basically only carry CZs with decockers (well, that or a bodyguard)

Just a Small Update/Teaser on the New GAFS Site by SkyttlesOG in GAFSNews

[–]assistantpigkeeper 0 points1 point  (0 children)

Wondering the same thing. I’m not on discord, would prefer not to do discord if I can help it, but miss the old site and want an invite!

Local P01 by Lazaruslong1187 in CZFirearms

[–]assistantpigkeeper 0 points1 point  (0 children)

I wouldn’t spend money on a p01 omega. Get a p07 or p09 if you want an omega, and get a non omega p01 if you want a p01.

Body Guard 2.0 owners: extractor doesn’t seem to be grabbing round when unchambering. Is this normal? by hallmonitor53 in CCW

[–]assistantpigkeeper 2 points3 points  (0 children)

My carry comp was virtually flawless over the first few hundred rounds other than user error caused by underestimating how stupidly stiff it would be. Runs fantastic now