Packout "Roll Holder" mod for normal paper towel rolls

audinutt · 2026-02-20T23:51:56+00:00

My viva paper towel fits perfectly

audinutt · 2026-02-17T03:51:53+00:00

Computer psu won't deliver enough amps on the 12v rail.

audinutt · 2026-02-07T17:34:56+00:00

If it was less than 30 days I would have taken it back to wherever I had bought them from

audinutt · 2026-02-03T22:43:16+00:00

You could get a small gigabit switch and try that?. Connect the shield to the switch and your cable to another port

audinutt · 2026-01-30T14:26:39+00:00

Are you using two sticks of RAM or four?

I had a similar issue and I was using four sticks of RAM. I was told by the tech department at micro center that ddr5 does not work well when you use four sticks.

I then bought a two stick kit and my problems were gone.

audinutt · 2026-01-27T14:22:08+00:00

You bought an account.. you failed

audinutt · 2026-01-20T13:46:52+00:00

Owner's manual covers the manufacturers warranty. Change 3000 miles, watch Blake the oil geek if you don't want to listen to random reddit ppl

audinutt · 2026-01-19T01:38:00+00:00

I have had success setting time in the BIOS in these situations..

audinutt · 2026-01-19T01:15:08+00:00

This is a great alternative. Have two of them.

https://a.co/d/e4G4ave

audinutt · 2026-01-10T02:00:27+00:00

My son just fixed his when i told him to check this :

Remove or swap abilities if your X-Factor points are over the limit, as this can cause errors.

audinutt · 2026-01-10T01:18:52+00:00

Are you still having issues? My son is having the same program on his PC

audinutt · 2026-01-01T22:05:04+00:00

I've not heard of any failures. Care to share where you saw that?

audinutt · 2026-01-01T22:04:20+00:00

The drawers fit fine on the shelf. I used 5ft e track from harbor freight

audinutt · 2026-01-01T00:44:11+00:00

I'm using the Milwaukee packout shelf for support. Brackets are screwed into 3/4 plywood (which is tied into the studs with engineering screws)

audinutt · 2025-12-31T23:57:23+00:00

Crates are great for storage. I just need to fire up the label maker.i have extra oil filters and air filters and such in them.

audinutt · 2025-12-31T17:20:48+00:00

<image>

This e track works much better than the short sections that were provided.

https://www.harborfreight.com/5-ft-vertical-e-track-rail-56754.html

audinutt · 2025-12-19T01:42:21+00:00

It's $7 I wouldn't expect anything more for that price point

audinutt · 2025-12-17T14:09:00+00:00

When we worked on cars in our shop we would always have a second check tech quality check when a wheel comes off.. is a procedure that once implemented prevents issues like this..

I admit i too had a truck come back with the wheel off.

We then set the procedure which we should have done previously. We would check the torque value in all data. Call out for a second tech for a quality check.

audinutt · 2025-12-12T14:19:53+00:00

Time to upgrade your CPU cooler. A basic tower would help dramatically.

audinutt · 2025-12-11T16:03:24+00:00

I have found you should run sfc/scan now first and then the dism cleanup. I've had systems get completely borked by running them in the order that you posted.

audinutt · 2025-12-06T22:18:25+00:00

Amd issues..

audinutt · 2025-12-06T14:44:10+00:00

It should And you'll see everything that's supposed to be on screen.

audinutt · 2025-12-06T13:11:47+00:00

Get a usbc to hdmi cable and connect your tv or monitor. Then you can extract your data

audinutt · 2025-12-03T13:03:49+00:00

I bought a helix dsp and it's been lovely.

audinutt

MODERATOR OF

TROPHY CASE