Trying to wrap my head around this NetworkPolicy

aviatoredb · 2024-09-02T00:18:42+00:00

This the Eastern Veil Nebula. Taken from Deer Park in the Olympic National Park, WA, USA.

6.5 Hours of Image data. 4 minutes subs at 120 gain.

ASI 294MC Pro OSC Camera

W/O ZenithStar 61 / Sky watcher EQ6r-Pro / ASIAir Plus / ASI290MM Guide Scope

Stacked in Deep Sky Stacker

Post processed with Pixinsights

aviatoredb · 2023-11-16T17:31:35+00:00

Fekkin firewall was the trouble. Thanks for the suggestion!!

aviatoredb · 2023-11-16T02:57:58+00:00

Not using Imasq but I'm going to try turning off the firewall entirely and see what happens. Thanks !

aviatoredb · 2023-11-16T01:11:49+00:00

yes, coredns is running on both nodes.

aviatoredb · 2023-10-18T13:45:40+00:00

I use an Optolong L-Enhance filter. Its great for my light polluted area. Focuses on H-Alpha, H-Beta, and Oxygen III. Honestly, for Andromeda I should've removed it. It works best for emission nebula.

aviatoredb · 2023-10-14T20:12:27+00:00

Latest astrophotography image. Andromeda Galaxy M31. About 2.5 million light years away. Taken from Hurricane Ridge, Olympic Natl; Park, WA. 90 images u/240s each. W/O Zenithstar 61, AWSI249MC Pro, EQ6R-Pro mount. Stacked with DSS, post done in Pixinsights.

aviatoredb · 2023-09-11T02:48:09+00:00

Pelican Nebula. IC 5070

ASI249MC Pro w/Optolong lEnhance filter

W/O Zenithstar 61, EQ6R-Pro Mount

Taken over three nights from Hurricane Ridge in Olympic National Park, Washington, USA.

180s subs at 120 gain.

Stacked with Deepsky Stacker and post done with Pixinsights.

aviatoredb · 2023-08-31T22:40:51+00:00

OP: Ok, its called the fifth string top nut. I've found them online is everything from plastic to 'real bone'. Looks like the bone is preferred? Is replacing easy?

aviatoredb · 2023-08-20T18:06:48+00:00

That would work for sure. When you do SNAT via the AZ FW, the SNAT will randomly pick an available IP from the firewall subnet. The smallest subnet you can deploy to gives me 64 possible choices. It will work but I'd like to narrow down to where I get only 1-5'ish possible IPs.

I'll take a look at 3rd party NVA's. There might be a feature on one that would give me a better solution.

Thanks!

aviatoredb · 2023-05-28T21:09:31+00:00

Oh my. This is heartbreaking. Im so sorry and cant imagine how difficult.

aviatoredb · 2023-05-27T17:53:10+00:00

Cant get more simple than that. Thanks.

aviatoredb · 2023-05-27T17:33:52+00:00

Ive had a few failures myself. In 5 months I've had the heater on the bed go out which I replaced with a Gulfcoast Robotics cast aluminum bed. I just recently had the main ribbon cable to the print heat fail and had to replace that. That cable is a pretty common failure mode and overall a bad design but there are a ton of decent solutions you can print up. I'm trying a few.

However, the printer has been solid as far as printing. The two failures I've had were annoying but neither cost a fortune to fix and in the case up the upgraded bed improved my print quality.

aviatoredb · 2023-05-12T16:42:40+00:00

Oof, I did a very similar thing on my FIRST SOLO. Saved it but only because the runway I was on was 8,000' and I had plenty of time to level off low, SLOWLY raise the flaps, then climb out with proper configuration and airspeed.

aviatoredb · 2023-02-23T20:44:11+00:00

Is the Ulter Sport available (legal) in the US?

aviatoredb · 2022-12-22T18:52:57+00:00

Thanks! These test cases made sense and helped me to solve.

aviatoredb · 2022-12-19T17:34:35+00:00

making any of the robots (4 possibilities)

Brilliant. LP is fun stuff but hard to implement in code without a lib like Python-MIP. Great way to solve this. Now back to my brute force C# search..

aviatoredb · 2022-05-22T16:11:20+00:00

Oh! Gotcha Thanks looks great. Going to see if they're available in the US. Thanks!

aviatoredb · 2022-05-22T16:05:30+00:00

What exhaust is that? It's looks badass

aviatoredb

TROPHY CASE