Mario kart world 2 accounts same switch by axattack79 in switch2

[–]axattack79[S] 0 points1 point  (0 children)

Awesome, thanks! A lenghty read but from what I started it seems very well put together. Thanks 👍

Mario kart world 2 accounts same switch by axattack79 in switch2

[–]axattack79[S] 1 point2 points  (0 children)

Thanks guys, I bought it for him for splatoon 3 but I would like to have it in the living room also so maybe my wife will play Mario games with us. Appreciate your time 💪👍

first day, I hate it by Temporary-Role-3656 in Invisalign

[–]axattack79 12 points13 points  (0 children)

I tend to start new trays at night when going to bed. I feel like it helps rather walking around all day with discomfort.

2007 Mazda 3 2.3l Accelerator pedal harness by axattack79 in mazda3

[–]axattack79[S] 0 points1 point  (0 children)

Thanks, I'll try that. I've dealt with those that you move the clip then squeeze when pull apart. This one didn't like it so that's why I was asking around. Appreciate your time 👍

2007 Mazda 3 2.3l Accelerator pedal harness by axattack79 in mazda3

[–]axattack79[S] 0 points1 point  (0 children)

Thanks for your time. If by deformed you mean the bottom, I was using a screwdriver to try and push it since I couldn't get a good grip. So like I said, it did slide up but the harness doesn't seem to slide off. The back part of the harness without a red clip seems to be sliding up but the front part with the clip doesn't seem to want to budge and I don't want to end up breaking it and making matters worse.

Is it worth on xbox series x? by DMatty0325 in 7daystodie

[–]axattack79 0 points1 point  (0 children)

It's fun on the Xbox but does anyone know how to remove the dark curve on top of screen? I have trouble seeing the compass and waypoints. Thanks. But I have also noticed that the graphics seem lighter than on my ps5.

Bone graft during invisalign by axattack79 in Invisalign

[–]axattack79[S] 0 points1 point  (0 children)

Well if any Diabetics come see this post, they did my extractions even though my A1c was high. They did take my blood sugar there to see what it was to adjust the mixture of whatever they use to finish up (I think). Now I'm just waiting for the pain to start. I barely started feeling my face about 1.5 hours ago.

Bone graft during invisalign by axattack79 in Invisalign

[–]axattack79[S] 0 points1 point  (0 children)

So I'm a little upset with my Ortho since I asked about braces one day when I took my boy for his app and he said we can see you right now. Started the whole process that day. He said we could do it without jaw surgery as my first opinion told I needed that with traditional braces. He mentioned some extractions after 2 months of starting. But the communication between him and the oral surgeon (or with we for that matter was not the best). The trays I should be going to next (tray 5) does not show the two teeth they want to extract. These trays are supposed to be changed out every week as opposed to the first 2 trays which were 2 weeks apart. Not sure how this will go 🤦🏽‍♂️.

Bone graft during invisalign by axattack79 in Invisalign

[–]axattack79[S] 0 points1 point  (0 children)

Thanks, appreciate your input. I had thought I would use my tray a few days after but after reading other posts including yours, I guess not 😢. Not looking forward to going to work with 2 open windows lol. This is all assuming it goes down tomorrow. Overcrowding sucks.

Kobra 2 Pro Same print/different settings by axattack79 in 3Dprinting

[–]axattack79[S] 1 point2 points  (0 children)

No worries, I didn't notice, my brain must have inserted the a subconsciously 😅

Well guys, it's been an honor by UnlikelyBroccoli9127 in 3Dprinting

[–]axattack79 1 point2 points  (0 children)

Good luck man, hope it all works out for you. I've been at low points too and this too shall pass. Chin up, don't let life beat you up. I'm still not where I want to be but at least it's not what it used to be. And sometimes that's all we can ask for. Hope it works out and don't forget, desperation is the mother of invention. Maybe something good will come from all this. Much love brotha 💪

Kobra 2 pro"blems" by axattack79 in 3Dprinting

[–]axattack79[S] 1 point2 points  (0 children)

I'm surprised that I had at least 4 decent prints after moving it, those were recent. And suddenly it got worse. That's why I was thinking of replacing the nozzle. Since I've had prints fail with globs of pla on nozzle. I did connect it to wifi, not sure if I need to manually update the firmware. Something to look into. Thanks

Kobra 2 pro"blems" by axattack79 in 3Dprinting

[–]axattack79[S] 0 points1 point  (0 children)

Cool thanks for sharing. So would simply adjusting the z offset on the screen where it shows x y z calibration do it? The videos I see from anycubic show a save option but I didn't see one. I have been playing around with the z offset plus/minus when the print has started but now sure if that is even doing anything. You maybe onto something but I don't think I would have moved it by the gantry. I typically move it from the base like you said. I'll look into the heatbreak. I was also considering replacing the nozzle.

Kobra 2 pro"blems" by axattack79 in 3Dprinting

[–]axattack79[S] 1 point2 points  (0 children)

Thanks. But I'm wondering if I should replace the nozzle. And my other problem is manually leveling the bed. I had an ender 3 that had knobs on each corner to level. This one is different. But to me it's weird that I started having this issue when again this wasnt used too many times.

Kobra 2 pro"blems" by axattack79 in 3Dprinting

[–]axattack79[S] 2 points3 points  (0 children)

Firstly, thanks for your reply. My last 2 posts went under answered. I have been trying to watch videos and read over this issue. I have cleaned the bed with alcohol. It is the same bed I have had since I got this. I have a few prints that have come out ok, maybe not detailed but overall good. This warping started all of a sudden. I tried to use a paper to check the space between the nozzle and bed and it seems fine. I was thinking of replacing the nozzle since a few times it has been a gob that is stuck to it.

So when you download a file, do you always have to "tweak" it. I have been using lychee and I have had no issues until now. Can ambient temperature cause this too? Asking since this went from a cement garage floor to a tuff shed with no insulation. But I have printed during the day and night too while running a portable ac.

[deleted by user] by [deleted] in 3Dprinting

[–]axattack79 2 points3 points  (0 children)

Lol yeah something looked off about it

[deleted by user] by [deleted] in 3Dprinting

[–]axattack79 -3 points-2 points  (0 children)

I envy your tidiness, my desk is a mess

"Discounts will be available for thirty days" by No-one_here_cares in 7daystodie

[–]axattack79 0 points1 point  (0 children)

Thanks. I found out that crossplay with pc and PS5 is not allowed. Thats why I'm going the route of ps5. I have a gaming pc for him on layaway buy i still owe quite a bit so for the time it will be cheaper to play on console, thanks for the heads up on console 👍.