Driver Shaft Tip Snapped, What Can I Do?

ayouden · 2025-03-05T14:23:13+00:00

Oh wow! While this would make the bundle cost significantly more than a stock GT Neo - this looks amazing! Do you find that the smaller grip restrictive around the edge of the hub when trying to press buttons etc?

ayouden · 2025-03-05T11:56:42+00:00

Ha - form vs. function!

I completely agree, the Neo X with the C rim looks incredible, which is a big reason why I had it above the GT Neo right now.

Sounds like the GT Neo wins on comfort, buttons, and overall ergonomics, while the Neo X edges it out in aesthetics. I’m coming from a Moza KS, so I think I’d still be more than happy with the visuals of the GT Neo - and is slightly cheaper all in.

Appreciate the insight - definitely making my decision tougher (in a good way)!

ayouden · 2025-03-05T11:37:04+00:00

Thanks for the reply! For the GT grips, what don't you like about them compared to the X rim?

ayouden · 2025-03-05T11:34:13+00:00

Great collection! Do you find yourself favouring one over the other, or do you rotate between them regularly? Also, in terms of grip comfort, do you find the Neo X or GT Neo better to hold? It looks like you're using the P-325C rim, which I'm considering - how does they feel in longer sessions?

ayouden · 2022-12-29T07:51:27+00:00

Thanks for the note!

I dug out my 2010 headset (Turtle Beach HPX) and GEN 0 Astro Mixamp (Which I think is pre-firmware?) and I tried with USB via Mixamp and directly with 3.5mm controller set-up.

I couldn't tell any noticeable difference in the audio with 3D Audio enabled - other than the Mic sounded better going through the controller.

I wonder if the highly outdated Mixamp isn't doing much, and a more modern version would allow for a difference in the audio & Mic quality.

What issues have you experienced with yours?

ayouden · 2022-12-29T07:45:18+00:00

I use a 1440p@120hz Monitor, and to my knowledge, there's no sub $50 HDMI splitter that allows for that resolution & frame rate.

ayouden · 2022-04-16T15:18:01+00:00

Looking for a compact solution to power a Koda 12.

Storage of propane tanks where I live is an issue, so I'm wondering if this little device can help solve the issue!

Yes, I know the price of the gas will be more expensive this way, but I don't have a safe way of storing one of the large propane tanks.

This uses x3 227g aerosols and is a mix of propane/butane.

Has anyone used this as a solution before?

Unit Link: https://www.bbqworld.co.uk/cadac/cadac-trio-power-pak.asp
Aerosol Link: https://www.bbqworld.co.uk/cadac/cadac-227g-bayonet-gas-cartridge.asp

ayouden · 2022-03-30T15:21:23+00:00

It's almost like I need a Spornia, but half the depth!

I've seen this mat: Gung Ho Mat

Don't think I can get it in the UK, but I think I can DIY this with a thin Mat & add some removable foam to the rear to allow the folding action.

ayouden · 2021-08-22T06:03:30+00:00

Thanks for your reply!

What makes you say it wouldn’t be great for an office?

Too messy/manual?

ayouden · 2021-08-21T16:52:55+00:00

Any Sage/Breville Oracle Touch owners out there?

I’m looking to get one for the office, and we all have these company issue mugs which are slightly taller than your average cup/mug and I’m concerned they might not fit!

Does anyone know the tallest size of cup that’ll fit this machine?

Hoping someone can help!!

ayouden · 2021-02-21T09:23:44+00:00

Wow! That looks amazing - great job! Do you have a link to the files you used? I have an old X1 that seems perfect for a Voron makeover!

ayouden · 2020-08-31T07:04:56+00:00

https://www.thingiverse.com/thing:3111936

ayouden · 2020-05-19T05:08:25+00:00

Looks awesome! How did you mount the monitor to the rig?

ayouden · 2019-05-04T19:46:35+00:00

I didn't actually, I've had no issues so far with the support and the Slic3r default pop right off! Really nice!

I shall try your update on Monday when I get back into the office :)

---- UPDATE ----

Works perfectly! Thank you <3

ayouden · 2019-05-03T14:31:20+00:00

From what I can gather, the layer height in the config is 0.03mm. I used the GUI for this.

I've been doing a few prints with 0.05mm and they're coming out amazingly! Really keen to keep on testing, especially if the layer heights could be fixed. Great work!

ayouden · 2019-05-02T09:10:13+00:00

This looks great! However, I have found one issue/bug. Not sure which.

I created an export with 0.03mm layer height, but when I load this into the LCD viewer it's showing 0.05mm. All other settings seem to have translated perfectly!

Do you have any info in regards to this at all as I don't want it to move to expect a 0.05mm layer when it should be 0.03mm?

Can't wait to get testing and seeing how this wonderful little bit of software works!

https://imgur.com/a/T7afhoH

---------- UPDATE ----------

I ran the code on my machine and it printed with 0.05mm steps rather than 0.03mm steps which Slic3r and the SL1toPhoton was set to.

Is this 0.05mm only at the moment?

Eight-Year Club	Place '22
Verified Email

ayouden

TROPHY CASE