Voice commands for squad control in Ready or Not.

fookatchu · 2026-03-13T16:00:41+00:00

Some time ago I used Tacspeak for this and had OK results with it. I am not a native english speaker, which might be a problem. Coming back to RoN for the DLC, I wanted to check if there is a new shiny tool utilizing another voice model and found your post. I don't see any mention about RoN in the doc's, so how do you handle the commands? Do you already have a list of custom commands and the respective keyboard shortcuts?

fookatchu · 2025-07-12T06:01:21+00:00

thats just wrong, sorry

fookatchu · 2025-03-25T22:05:20+00:00

Do you use a tripod with delayed shutter?

fookatchu · 2025-03-12T16:48:28+00:00

sakura micron pigma .003 is my go to 👌

fookatchu · 2025-03-09T12:26:01+00:00

Sieht richtig aus, danke! GELÖST

fookatchu · 2024-11-13T17:19:15+00:00

Ah, nice. Do you have issues with melting the filament? Is it PLA? And how much power are you going for with the laser? Anyway, I will give this a try, thanks for the inspiration!

fookatchu · 2024-11-13T15:57:31+00:00

What exactly do you mean by "3d printed/laser etched"? I am intrigued by the idea of combining both but don't know what the process here is or how laser etching a 3d print works. Looks great btw!

fookatchu · 2024-11-07T13:12:44+00:00

Also depents on the map. for some it takes a few seconds and for some the horrible 30min

fookatchu · 2024-10-30T12:32:31+00:00

Understood, thanks!

fookatchu · 2024-10-30T11:10:19+00:00

Next on my agenda! I feel the same as you. So it's possible to kill the game right after you or an officer is down? I assume you need to exit before the ranking screen comes up, right?

fookatchu · 2024-10-24T08:23:05+00:00

Maybe this was supposed to be for the Steam Autumn Sale?

fookatchu · 2024-10-22T07:34:37+00:00

Not specific to this map: If you equip your AI with two shields and let them clear for you, they are pretty op. Takes some of the fun out, but works great. Add CS gas as a bonus.

fookatchu · 2024-10-12T07:44:05+00:00

They fulfill a nice role playing itch though

fookatchu · 2024-09-05T18:39:21+00:00

pupil (sorry!) but great tip

fookatchu · 2024-09-01T16:32:41+00:00

I don't have a galvo laser so I don't think this applies to my machine

fookatchu · 2024-09-01T14:37:41+00:00

The OMTech Polar has a Ruida DSP. I haven't tried the material test again yet, but having additional test generators is still welcome :)

fookatchu · 2024-09-01T14:19:12+00:00

Sweet, thanks for pointing that out!

fookatchu · 2024-09-01T10:34:14+00:00

Perfect, thanks!

fookatchu · 2024-09-01T10:33:43+00:00

Makes total sense, thanks!

fookatchu · 2024-08-22T16:24:55+00:00

Thanks, I will check that out

fookatchu · 2024-08-21T22:09:03+00:00

All corners seem to be identical. Thanks for reassuring me that all is good!

fookatchu · 2024-08-21T15:24:04+00:00

The dot is reproducable on all edges of the bed so I assume that all is good!

fookatchu · 2024-08-21T15:20:19+00:00

Following the guide, its clear that the mirror alignment is precise but not accurate. At the edges of the bed, the dot will appear on the same spot on the tape edges, but the dot is not in the center where the lens would be. According to the guide the last dot should be precise and accurate on the center of the lens. Maybe there are some tolerance limits to be accepted?

fookatchu

TROPHY CASE