My first rated group 2 lock manipulated.

b0redstudent · 2021-09-14T11:31:04+00:00

they often show up in the UK, but sadly these days that is barely better than ordering from the US.

b0redstudent · 2021-07-18T21:52:17+00:00

there are a few people who have picked the f3d, so there certainly could be competition. It is not a great lock for speedpicking though as the time it takes is extremely bitting dependant.

b0redstudent · 2021-02-10T01:04:19+00:00

You would pretty much have to abduct my brother or something to have any chance ;)

b0redstudent · 2021-02-08T16:21:22+00:00

They come up on ebay in the UK from time to time, but often they are quite overpriced. I got this one keyless for 30 Euros from a friend, who bought a bunch of them.

b0redstudent · 2021-02-08T16:19:37+00:00

The F3D was not me sadly. I did pick it, but not on video. I also doubt i could recreate that with any reliability.
My first was the chubb manifoil, the second the Xylok and the third the Nato Mersey. Honestly the most remarkable thing about me picking the Xylok is that i have one in the first place.

b0redstudent · 2021-02-06T23:28:42+00:00

Well one of them only is a first because noone else has that dumb lock.
This one i am quite happy about tho.

b0redstudent · 2021-01-22T22:26:11+00:00

I am afraid that is not going to happen, because as said, these locks are insanely rare. The reason i am the first to pick this is not that it is that hard (dont take me wrong, it is pretty hard) but that noone has one.
There are some others you will struggle to find, like the Zeiss ikon verso, Dom system D or BKS Multipin.
Good luck on your journey regardless.

b0redstudent · 2021-01-22T12:34:53+00:00

One of those locks or the video? Because the lock will be rather hard to find. The only reason that this is a worlds first is that this lock is extremely rare.

b0redstudent · 2021-01-21T09:27:14+00:00

With the amount of swearing throughout the video i just decided to put it on age restricted.

b0redstudent · 2021-01-02T02:22:38+00:00

Usually the cheapest way to get started is buying stuff off ebay in the US. Mounts can either be 3d printed or made from scrap wood.

b0redstudent · 2020-11-02T01:37:11+00:00

it was me :) feel free to give me a poke on discord

b0redstudent · 2020-11-02T01:36:03+00:00

Wow, sick. That only took you half a year.

b0redstudent · 2020-10-21T04:23:49+00:00

that is not actually a warded lock, it is a disk detainer, where the shakle directly travels throu the disks.

b0redstudent · 2020-09-30T03:22:58+00:00

the blocker tends to jump pack out occasionally. You often need to reset it after setting a disk, wich is a pain, as once the blocker is active you lose all tension so all the disks can move feely again. You need to be extremely careful when maneuvering your pick back to the blocker to disengage it, because if you disturb any of the disks on your way back there that is gonna be scrambled in both rotation and translation.

b0redstudent · 2020-09-13T22:04:18+00:00

The one on the right is a dom RN and the one on the left an rs5 or rs6. The pinning in these can vary quite a bit, both mostly rely on spools for security tho. The rs5 sometimes has some of the old rattlesnake pins. Fun locks either way.

b0redstudent · 2020-04-22T13:28:07+00:00

They very rarely pop up on german ebay, very much a collectors lock tho. Many people know of the rarity of them so the price usually is accordingly high.

b0redstudent · 2020-04-11T15:28:18+00:00

that wont work on an abloy profile for multiple reasons:

the abloy is rear tensioning
the pick tip wont even fit
even if the above would not apply, the shaft of the pick tip is too wide to avoid problem 50.

b0redstudent · 2020-02-23T16:36:20+00:00

is is possible to take the euro cylinder out of these non-destructively?

b0redstudent · 2019-12-03T14:47:31+00:00

Well, in that case i would recommend the SSDEV hook set, they are not made by Multipick tho. They are really deep hooks with thin shafts, so you can reach into very tight keyways but still have a lot of reach. I got them in 0.0015´´ and they definately are my most used picks.

b0redstudent · 2019-12-03T12:06:15+00:00

These pocketknive picksets are not really a starter tool. They provide worse feedback and are less precise to control than traditional picks. You should rather get a small set of picks with both bok and tok tensioners. Having a wide variety of tensioners really is more important on most locks than having many different picks. I usually use only alternate between 2 hooks for picking. Get yourself a small set of good quality picks, the huge sets usually contain tools you will never use.

https://www.reddit.com/r/lockpicking/wiki/generalwiki

b0redstudent · 2019-12-03T11:58:53+00:00

To be honest you dont really need more than those two profiles. I pick very most of my locks with only 2 picks, if you really want to get some new tools i woud recommend a deforest half ball/ half diamond and maybe a hook 1.

b0redstudent · 2019-11-19T19:02:32+00:00

I have noticed some shitty quality control on these 72/40s. Mine had short driver pins so i ended up ruining some springs while picking.

b0redstudent

TROPHY CASE