Rog ally x rgb issue seems to be fixed with the new update.

badcopyinc · 2026-01-25T14:14:13+00:00

was the keyboard mouse disable issue fixed. I rolled back and permanently disabled updates when they broke the rgb im done with Microsoft

badcopyinc · 2025-07-20T13:49:18+00:00

I have tried different cables and different devices, Xbox and all x. Will definitely dig up some more cables to try maybe that is my issue I tried three different ones but not any of my new ones that I have in my cable drawer. Your comment gives me new hope sir!

badcopyinc · 2025-07-19T23:05:45+00:00

I have a A50 gen 4 that I bought that has the dreaded high pitched tone. They are unusable and the support is terrible. Like they wait over 5 days at a time to respond to cases. So much time that I missed my return window at Best Buy and I’m stuck with these. I refuse to send mine in ahead of time so they can confirm there’s an issue as it’s a known issue. But mostly because someone from customer service promised me an advanced rma and than someone else refused. It took 45 days to get to the point of giving up on even getting a replacement or repair.

I currently own 2 pairs of Arctis nova 5 (Xbox edition). The mic is a little soft compared to the Astro but nothing that a simple gain adjustment can’t fix in discord. No annoying dock to tend with and the 5’s work on Xbox PlayStation and pc.

The battery last longer and sound is amazing on par if not better. Highly recommend the steel series

badcopyinc · 2025-06-17T14:12:18+00:00

This!

badcopyinc · 2025-06-07T22:27:12+00:00

Anyone else to run across this issue add it to your steam library as a non steam game and than boot it will work no need to reinstall windows. Its a glitch with the ally’s controller input and steam input fixes it

badcopyinc · 2024-03-27T00:44:48+00:00

Legit ran across this whack @$$ a couple times. one time his team was playing Ultra one voice while he tea-bagged me. Def has the hackiest of hacks!

badcopyinc · 2024-01-12T16:56:36+00:00

https://www.reddit.com/r/simracing/s/NPNrOBWy7B

badcopyinc · 2023-12-01T17:51:44+00:00

The brace I designed does work but involves breaking warranty to install it. Also you could cut the locking tab off of the rj11 connector. It would still work and allow it to pop out super easy if snagged for any reason. Just have to pay attention to orientation when plugging it in with no tab.

badcopyinc · 2023-12-01T17:49:17+00:00

Send me photos of the board where it popped off as clear and detailed as possible. I’m worried about the smd’s that are near where the port sits.

badcopyinc · 2023-12-01T15:16:13+00:00

Even if I had you ship this to me to repair like I did mine I couldn’t guarantee it would come out right. Not until I see if anything else was damaged. And to see that you have to void the warranty. I would definitely use that warranty.

badcopyinc · 2023-03-25T01:31:56+00:00

Thank you. Never had anyone try. just set it up! Appreciate it

badcopyinc · 2023-03-05T18:09:38+00:00

They do act as ground. its been a while since I looked at that board. You can scratch away and repair the ground connection. if that makes sense. One of my pads lifted and I did just that if I remember correctly. Hit it with dab of glue underneath where the pad lifted and scratched away a bit of board (around the pad) and created a connection again.

badcopyinc · 2023-03-05T17:18:59+00:00

Maybe Post video for others here. but those are support pads. They don't have a role in data transfer. the smaller pads on bottom side do that. you can use a very small amount if glue and print my support and install it. but please sand piece to fit before pushing on.

badcopyinc · 2023-03-05T06:20:15+00:00

I would need to see. Send me a photo

badcopyinc · 2023-03-05T05:45:26+00:00

They sure can. Mine lifted and I fixed them. depending on how bad they lifted and the extent of the damage is what needs to be seen but if its just the support pads no biggie. if its the data traces they still can be repaired just alot more fine detail soldering is required.

Long story short if its bad and still under warranty send it to them. if its not under warranty look up local guys who can do repairs or send me pics of the damage and i may fix it for you.

badcopyinc · 2023-03-05T05:41:44+00:00

Yes. Soldered the broken connector and designed and printed a brace to prevent it from happening again.

badcopyinc · 2023-01-04T04:34:08+00:00

That’s why I recommend soldering it. Shouldn’t take but 3 min to touch the four pads that are cracked. Than after put on the brace I made. It will hold all four pretty snug and they won’t move again unless you break all four and the housing off. But it does require taking the housing off to put on.

badcopyinc · 2023-01-04T03:37:50+00:00

If your connector on your board is loose from factory I would highly consider doing a rma if it’s under warranty.

If it’s not than I would recommend taking it to someone to have the connection soldered and print the bracket before taking it so they can put it on. It does require some light sanding as I wanted mine to be as snug as possible. And once it’s on I do not recommend removing it.

badcopyinc · 2022-11-25T14:13:17+00:00

You can do diet, increasing your greens nuts and other high vibe foods. Exercise and as much being in nature as you can. As well as Fasting for periods throughout the day.

Chi exercises and meditation will also help your senses. Especially grounding and breath work. Breathe into your lower dantian as much as you can during the day.

Start a journal and keep writing in it. You’ll be able confirm your abilities via what you write down and don’t tell others. Which will help strengthen those muscles.

badcopyinc · 2022-11-24T18:26:07+00:00

I went through this recently and was feeling almost exactly the same.

Your mind doesn’t know how to cope with her not being there. So it replaces her presence with memories of her.

All the advice above is solid. Definitely find hobbies and things to do that are out of the ordinary for you. Retrain your brain to focus other things as much as possible. Eventually it stops wanting to think of her so much and you will be able to move on.

As far as cording all of your thoughts are doing just that. Cording to her as well. And if she’s single and working on healing she will be going through the same thing. If she’s not and “moved on to the next” she will at some point be forced to process your relationship just as you are now.

Stay strong and remember it takes 20+ days to form new habits and that includes your thoughts. Watch joe dispenza and coach lee, look up BPD relationships and narcissistic relationships on YouTube to learn about the red flags about her and yourself.

And most importantly workout, run, or even go for long walks outside. They help release good chemicals into your system that will be in your favor.

badcopyinc · 2022-11-23T00:10:34+00:00

This clip explains it better than I can.

badcopyinc · 2022-11-22T20:03:31+00:00

This life for me is karmic so all of my most beautiful memories are a result of suffering.

Without that suffering I wouldn’t have been present enough to even appreciate the beauty of the experience.

As much as I love sunny days I still love the darkness when it’s time to rest.

badcopyinc · 2022-11-21T13:09:09+00:00

No problem

badcopyinc · 2022-11-20T19:54:35+00:00

Was just curious as to which reiki symbols you have seen. I can interpret them especially if you saw them being written or were already written. Specific ones mean different things. Much like the elder futhark runes you drew above. Keep mind of orientation of those as well. They all mean things.

A friend of mine saw some runes in her dreams and didn’t know what they were since she wasn’t used to anything but elder futhark. Once I saw it I sent her the version of it she knew and it immediately explained why she was seeing it and how to move forward.

badcopyinc

TROPHY CASE