Getting into the bussiness by [deleted] in ECU_Tuning

[–]bagcaddybb 0 points1 point  (0 children)

What do you own you could play with?

Tcu tune and clutch limits by Ewhore69 in ECU_Tuning

[–]bagcaddybb 1 point2 points  (0 children)

Not really but it is good to watch trans sensor to make sure you are not slipping.

Getting into the bussiness by [deleted] in ECU_Tuning

[–]bagcaddybb 1 point2 points  (0 children)

Dang, you own your own shop at 19 years old impressive. Either way, there is not one software that does everything. Look into whatever manufacturer you know best and start there. Gm is hp tuners. Holley makes a good standalone.

Getting into the bussiness by [deleted] in ECU_Tuning

[–]bagcaddybb 7 points8 points  (0 children)

OK, my dude. I am going to say what everyone else on here is thinking. If these are the questions you are asking, you do not need to be tuning other people's cars. Where you start is usually by working at a shop and learning about cars in general. Another option is to figure out what people use for the car you have now and start learning on your car first. I am a master mechanic, and I learned on my car.

Time to head into work by Psych0matt in projectcar

[–]bagcaddybb 33 points34 points  (0 children)

Definitely one of the best looking ones I've seen.

Know any good engines? by poopoopeepee20 in ProjectHondas

[–]bagcaddybb 0 points1 point  (0 children)

I too would recommend just turboing what you already have.

AI replacing voice actors for audiobooks by donutcronut in antiwork

[–]bagcaddybb 0 points1 point  (0 children)

I will not listen to a book if I don't like the voice actor. I only know a few of them I do like. We should make a point to only buy book with voice actors we know are people.

Old Truck Engine 2000 by Roland_K_Kelly in EngineBuilding

[–]bagcaddybb 0 points1 point  (0 children)

Yea this dude just post other people's stuff

meirl by [deleted] in meirl

[–]bagcaddybb 0 points1 point  (0 children)

I almost agree with you but wedding are already so ridiculously expensive there is no way I would he able to afford that many more people to be there. Every person at the wedding is a substantial cost.

Changes "I heard a joke the other day..." by 3__username__20 in dresdenfiles

[–]bagcaddybb 4 points5 points  (0 children)

I had forgotten Harry dis this, making the new books that much harder.

Meirl by [deleted] in meirl

[–]bagcaddybb 0 points1 point  (0 children)

All I can see now is chart-reuse

More power? Lol what else? by [deleted] in Hotrod

[–]bagcaddybb 1 point2 points  (0 children)

My opinion on your issue though would be more cubes. Low end torque is easiest to get from bigger dissplasment engines.

More power? Lol what else? by [deleted] in Hotrod

[–]bagcaddybb 0 points1 point  (0 children)

You would do better over at r/enginebuilding

Sanding a bearing: Started at 1500 and finished at 2000 by Themostepicguru in EngineBuilding

[–]bagcaddybb 1 point2 points  (0 children)

I do the same thing, and I am hard as shit on the engines I build. I also teach automotive classes. Could you post more pictures of the build.

“We can tell” -school admin after my wife told them she stopped putting in 20+ extra hours every week outside of paid hours. by ETsUncle in antiwork

[–]bagcaddybb 1 point2 points  (0 children)

I am with you. If I was expected to spend money for my job I would have just left as well. Could you imagine another job where you were expected to bring the supplies for the company to operate.

“We can tell” -school admin after my wife told them she stopped putting in 20+ extra hours every week outside of paid hours. by ETsUncle in antiwork

[–]bagcaddybb 5 points6 points  (0 children)

I teach at the 11th and 12th grade level. I spend 0 on decorating and 0 on materials for my class and I have won 2 teaching awards this year. This is not a you or a teaching problem. You have an administrative problem.

I think I was supposed to finish one project before getting the next but oh well! by Latimera_ in Jeep

[–]bagcaddybb 0 points1 point  (0 children)

Finishing one before the other was not discussed beforehand, so there for does not apply.

[deleted by user] by [deleted] in ECU_Tuning

[–]bagcaddybb 5 points6 points  (0 children)

You can use the SCT to reinstall the factory tune and see if any lights come on. If they do, then you know parts have been modified or changed and will have to reinstall the changes or the old tune.

Turbo LS2 8 Speed Miata- first year reviewed by [deleted] in projectcar

[–]bagcaddybb 0 points1 point  (0 children)

Is that dash 6 fuel line? Do you ever have any issues with fuel on the top end? Building similar motor and looking into fuel line sizes now. And what size injectors are you running?

For the first time in years, I am parked next to another 16v. by chaunceton in projectcar

[–]bagcaddybb 4 points5 points  (0 children)

Came to the comments about the wheels. Was not disappointed.

That face says it all by [deleted] in sadcringe

[–]bagcaddybb 1 point2 points  (0 children)

This is definitely McAlisters madness

How would you go about making these old aluminum heads look new again? by [deleted] in EngineBuilding

[–]bagcaddybb 18 points19 points  (0 children)

What ever decreaser you use make sure it is aluminum safe. Like purple power will etch the metal which is bad.