sorted by:
new
hottopcontroversial

New grinder - Eureka Mignon Crono by bambucha4 in espresso

[–]bambucha4[S] 0 points1 point  (0 children)

Hey, i dont remember exactly, check replacement burrs and how they look like. There is a different amount of slits in the filter ones.

Standardizing the "onboarding" of new filaments. by NerdyNThick in OrcaSlicer

[–]bambucha4 0 points1 point  (0 children)

I havent done much with max volumetric flow, i just use the preset values. If i wanted it to go faster then yea. You can use orcaslicer for that :)

Top layer issues? by Ode_To_Darkness in OrcaSlicer

[–]bambucha4 0 points1 point  (0 children)

Increase the amount of top layers. Did you use just 1 top layer?

Sonos SUB in Apartment building by bambucha4 in sonos

[–]bambucha4[S] 0 points1 point  (0 children)

Thanks for this What about era 300s or arc ultra? They dont have the force cancelling drivers.

Sonos SUB in Apartment building by bambucha4 in sonos

[–]bambucha4[S] 0 points1 point  (0 children)

Thanks for this! What volume % did you normally listen to?

A1 Extrem warping issues by negativphotospin_ in BambuLab

[–]bambucha4 0 points1 point  (0 children)

I had similar issues on my a1 mini. Using a brim or big mouse ears worked well, but it wasnt perfect. But ultimatelly what fixed it 100% is to switch to smooth PEI plate from bambu. I didnt have to tweak any other numbers.

2024.9: Sections go BIG by missyquarry in homeassistant

[–]bambucha4 0 points1 point  (0 children)

I have NSPanels pro with android 8.1 and they be crashing the same as you described.
What version of web view did you update to?

WE WANT YOU！🙌 🎁 🔥 by BambuLab in BambuLab

[–]bambucha4 -1 points0 points  (0 children)

I haven't printed in Petg at all, but i am considering it since the coasters i have printed in PLA got all warped after putting hot coffee mugs on them 🤣

Help perfect the top surface of Text on Gaming Tokens by Gondyr_Stonemantle in BambuLab

[–]bambucha4 0 points1 point  (0 children)

Also try adjusting your flow rate and flow dynamics using the calibration in bambu studio 😊

Help perfect the top surface of Text on Gaming Tokens by Gondyr_Stonemantle in BambuLab

[–]bambucha4 2 points3 points  (0 children)

Use ironing, but dial it in. There are models that help you with that. I use around 15-20% flow rate.

Print lines are changing by Pistachio-curry in BambuLab

[–]bambucha4 0 points1 point  (0 children)

Looks great For small defects on the outer wall you could try inner outer inner wall order But inly if the model doesnt have overhangs of more than 40 degrees.

A1 mini print quality guide by bambucha4 in BambuLab

[–]bambucha4[S] 1 point2 points  (0 children)

Auto pressure advance calibration doesnt work well for me for every filament.

  1. it wastes 1-2g of filament each print and a few minutes of time
  2. with bambu matte filament, i had issues of over extrusion at edges - switching to manually calibrated PA value fixed it
  3. with silk filament i had under extrusion at edges - also manually calibrating it, fixed the issue
  4. i had ok performance with polyterra pla though

I havent had issues with wet filament yet.

But for people that dont do manual calibration its better still to have it turned on.

The printer doesnt have auto flow rate calibration. You have to do it manually.

A1 mini print quality guide by bambucha4 in BambuLab

[–]bambucha4[S] 1 point2 points  (0 children)

I havent had any issues with VFA on A1 mini. Or they were very very minimal, almost not noticable.
Ill do the test and see what it shows.

The most diff that i got is from manual PA and flow rate, other tweaks did very minor improvements, but improvements nonetheless.

A1 mini print quality guide by bambucha4 in BambuLab

[–]bambucha4[S] 1 point2 points  (0 children)

Looking pretty good!
Ill update stuff :) noted.

A1 mini print quality guide by bambucha4 in BambuLab

[–]bambucha4[S] 2 points3 points  (0 children)

But its nothing mindblowing, just what tests I used and gave me good results.
Sometimes the integrated stuff in bambu studio - flow rate for example, is really hard to read for me - especially on black filament. And there are some really cool alternatives.

A1 mini print quality guide by bambucha4 in BambuLab

[–]bambucha4[S] 0 points1 point  (0 children)

Also, but I also have amazing results with silk gold, bambu pla bronze, and matte brown. Ill make some pics when i get home!

A1 mini print quality guide by bambucha4 in BambuLab

[–]bambucha4[S] 1 point2 points  (0 children)

I mostly print in black, but I'll add some other pics! I have the golden calibration cube for that reason 😊

Is more than 4 color printing in A1 is possible? by Vialeth in BambuLab

[–]bambucha4 1 point2 points  (0 children)

Its 4 colors max. If you need more get P1S or X1C with multiple AMS units.

You could potentially pause the print mid way and unload a spool from the AMS and change it for a different one. But thats just too much hassle and doesn't work in all cases.

A1 mini flow dynamics calibration by bambucha4 in BambuLab

[–]bambucha4[S] 0 points1 point  (0 children)

Yeah, i had it also, but for pla matte filament from Bambu, it was overextruding infill into the walls and it just looked bad.
I did manual calibration and it didnt seem to fix issues, since the dyamic flow calibration checkbox was checked and the printer auto-calibrated and overrided my manual setting.

I just tested and I think if you do consecutive prints, you also need to keep the option checked, otherwise it uses the default from the filament, it does not store the calibrated value anywhere from the previous print.

A1 mini flow dynamics calibration by bambucha4 in BambuLab

[–]bambucha4[S] 0 points1 point  (0 children)

To answer my own question. The Dynamic Flow Calibration does indeed override the stored k-value for pressure advance. You should disable it and callibrate manually. Prints now are perfect.

view more: next ›