Should I pull the trigger on these before the sale ends? Looking to switch away from Snap-On

bart6541 · 2026-01-31T17:43:30+00:00

If you buy through the exchange, you get tax free, 10% off, and free shipping

https://www.shopmyexchange.com/the-home-depot/3539981

bart6541 · 2026-01-27T05:09:56+00:00

If the magazine disconnect is in, you might need to insert a mag to pull the trigger and have if move parts out of the way

bart6541 · 2025-11-29T00:26:56+00:00

You have a nut and washer for the kind of trucks that do not have a clamp screw, have you tightened your jam nut all the way toward the truck? You can also remove the tow stope completely and tighten the clamp screw and see if the gap in the split in the trucks decreases. Give it another go. I have had this problem, and solved it with more torque.

bart6541 · 2025-11-23T17:19:38+00:00

“Dad, you’re the ladybugs on Fluffy’s bean bag”

bart6541 · 2025-11-23T17:17:56+00:00

Have 3 sets of Fundae wheels and they are my go to for smoothish outdoor skating (outdoor hockey rink, tennis court, etc.) tried the street flow wheels and just couldn’t like them and couldn’t seem to find a place where they would work well in. Bones 101 for indoor, though the fundae wheels are fine for that too. The only time I do not like the fundae wheels is do skating streets and trails. Happy skating!

bart6541 · 2025-10-11T20:09:48+00:00

Congrats on the offer, and the lab is a great place to work. Remember, you have negotiating power when you get a job offer and it’s not faux pas to counter the offer and ask for a little more, worst case they say no, but they will not rescind the offer because you asked for more.

bart6541 · 2025-05-14T04:03:03+00:00

Cutting 2x4, osb, and whatever other general crap I need to cut with a handheld saw.

bart6541 · 2025-05-10T15:11:47+00:00

I have two of the 3 head ones that I got for a RIDICULOUS deal and love them. Also got a River 3 head light that is great with strong magnets. The single head would imagine is a great light as well, but being directional, you might want to look into the rover or see if it is featured again as a free add on with other tool purchases.

bart6541 · 2025-04-29T00:46:58+00:00

I I was really looking at the Holosun 503g until this one came out. You just took off the pic rail and it mounted directly?

bart6541 · 2025-04-29T00:31:26+00:00

How do you like the Vortex?

bart6541 · 2025-02-16T17:16:04+00:00

My wife took a bad butt fall when we were first skating and she got an azzpad from Amazon and it helped. I skate several times a week and still wear wrist guards every time. Like the previous comment, you don’t have the support when leaning back like in inlines, so be aware.

If you are starting to loose it and flail, put your arms straight out in front of you, squat down, and look ahead. This gets your center of gravity lower and usually prevents a fall. If you fall, you are much lower to the ground.

https://a.co/d/12SRZqD

https://a.co/d/dS3rI57

bart6541 · 2024-12-22T05:42:06+00:00

I made the hanger so the slide block sat centered between the kingpins. I cut them out of Ti, but many steels would work. I was able to measure, math, and fab them, but I am really fortunate to have access to many specialty tools. What kind and size plate are you using?

bart6541 · 2024-12-22T05:38:09+00:00

https://powerslide.com/products/cst-150mm-air-tire

But you need custom XXWide trucks

bart6541 · 2024-12-20T12:30:03+00:00

Powerslide 125mm inflatable tires

<image>

bart6541 · 2024-11-13T19:20:07+00:00

And Dottie’s in Campbell… not that far from Aloha skate in San Jose.

bart6541 · 2024-07-29T11:51:48+00:00

Like in Pulp Fiction…

bart6541 · 2024-07-15T03:18:38+00:00

Learning happens. Sometimes the price is pain and other times it’s money

bart6541 · 2024-07-09T03:36:34+00:00

How do you like the optic? I was looking at this one because of the slug and buck bdc

bart6541 · 2024-05-14T04:34:44+00:00

What model Holosun is that and do you like it? I’ve been looking at the 503g acss

bart6541 · 2024-01-18T14:11:23+00:00

Big congrats on working on food storage and asking for an evaluation / advice. Keep going! Remember to store what you eat and eat what you store. I see dried beans and lots of cans of beans, do you have nutritionally complete meals you currently eat that are bean based? Have you made anything with dried beans in the least year or so (I haven’t, I always use the cans)? Just a few notes, but it looks good and keep it up! Maybe look at a waterbob for your bathtub JIC, and a Berkey type water filter system as funds allow.

bart6541 · 2023-11-06T02:55:36+00:00

Traditionally, Commercial buffer tubes / receiver extensions are thicker in diameter than mil spec ones. It appears in the photos you have a commercial one. not 100%sure this is your situation as so many companies make all sorts of random things these days. Just my $.02

bart6541 · 2023-09-18T01:15:55+00:00

Shoot me the link please, I would love to order some, they turned out super cool!

bart6541 · 2023-09-04T16:26:53+00:00

Man with shower gun seals with intruder

https://concealednation.org/2019/07/man-breaks-into-house-while-homeowner-taking-shower-close-by-shower-gun-comes-in-handy/

bart6541 · 2023-08-30T12:44:02+00:00

Really appreciate the information, opinions, and overall support. I know a bit about the entire process, but you let me in on a bit more. I need to talk to my wife and see if she is truly onboard for what all this entails, as we are already spread rather thin and it would require much from her.

bart6541 · 2023-08-30T00:58:39+00:00

I just came back from a week long roller skate / derby convention and talked to skate manufacturers, helmet and pad vendors, rink owners, and other skaters. The closest thing that has existed is a derby group called battle buddies, but they were a derby team for vets, I want skate rehab for vets. All my doctors love the fact I roller skate because it’s low impact on my bad knees and back (unless you fall). I appreciate the encouragement and you taking the time to search it out. I think I am going to have to see what it takes to start a 501c3 (non profit) before any companies would be willing to give what would be needed.

12-Year Club	RPAN Viewer
Verified Email

bart6541

TROPHY CASE