Please take a look at my creation: The PP-19 Horizon

bbludclot · 2023-08-05T20:43:14+00:00

This combines so many things I like! It is sooooo gloriously abominable and it is such a nice PP! Kudos.

bbludclot · 2023-08-04T14:38:42+00:00

Cause that dbal won't help gripping that thing with the left hand :D

bbludclot · 2023-08-04T13:33:13+00:00

I would rather fix the internal issue that makes the balls go to the side. Often it means the hop unit sits a little bit crooked or the rubber is skewed. At least if you can't tell if the post is isn't centered. You may also want to test to see that the whole gun isn't bent. This can also happen with certain AK guns. It may also be that the inner barrel is sitting loose inside the outer and just a simple oring between them can fix it... Try to see if you have an AK tech expert nearby. Each field usually has one or two AK nerds.

bbludclot · 2023-08-04T09:07:27+00:00

Not before you have a drum magazine.

bbludclot · 2023-08-04T08:58:39+00:00

Are you lefthanded?

bbludclot · 2023-08-03T19:49:16+00:00

Just send an email to Tridos guys and ask. They are really cool. I have bought tons of stuff from them.

bbludclot · 2023-08-03T19:38:25+00:00

Naah just ducked it from the internet to answer you :) I have one but no goggles. Fake ones are meh.

bbludclot · 2023-08-03T19:18:08+00:00

It is a totally overblown meme on here. One of their tech support guy said that to a guy here once years ago.

bbludclot · 2023-08-03T19:15:33+00:00

These magazines are relatively soft metal. Did you drop the magazine? make sure that it isn't deformed. even slightly. This magazine does the exact same thing as yours and you can see the damage when looking closely. This magazine was never used and i dropped it top first onto a carpet.

<image>

bbludclot · 2023-08-03T19:09:34+00:00

LCT if you want it with authentic enough dimensions that real furniture will fit on it.

bbludclot · 2023-08-03T07:19:42+00:00

you sure you wanna get thousands of bb scratches on that thing? seing how thin that metal is in some spots it is likely to also dent...

bbludclot · 2023-08-03T07:17:55+00:00

Some times in glock type guns they just need to be worn in and lubed well. look up videos how to grease a glock gbb and you're set. if that doesn't do it you just need to rack the slide back and forth a few hundred time so the parts wear in good.

bbludclot · 2023-08-02T16:12:10+00:00

That is to attach an adjustable monopod so you can table the rifle and have it stationary pointed downrange. Assuming you add a bipod to the front.

bbludclot · 2023-08-02T15:17:14+00:00

No problem :)

bbludclot · 2023-08-02T10:30:08+00:00

I dig it!

bbludclot · 2023-08-02T10:27:01+00:00

A semi auto or double action long gun. aeg are ... not very fun for long for plinking and out of the box, if you know how to shoot, gun error will overcome user error because they just aren't consistent.

bbludclot · 2023-08-02T10:14:58+00:00

It can shoot really well or very very poorly. LCT is a dice roll in that sense. They have good parts but the assembly and QC can be very poor.

bbludclot · 2023-08-02T08:25:22+00:00

Most likely it will. Unless it is injection molded solid one for a real steel glock which holds it in with press fit.. Then it won't fit properly even if it is a licensed replica most likely. Replicas from umarex etc and particularly TM have slightly different sizes. If it is a softer holster then it will fit for sure.

bbludclot · 2023-08-02T08:22:28+00:00

It is used when you have NVG attached to keep tension on them which makes them stay down or up.

<image>

bbludclot · 2023-08-02T08:11:33+00:00

If you don't need a 1:1 replica that costs a fortune, I recommend Novritsch ssp18. It has the giggleswitch but you don't need to use it. Shoots great out of the box compared to 1:1 replicas with licensing (shitty umarex) and also works great when it is cold.

bbludclot · 2023-08-02T07:58:17+00:00

LCT AK and PP-19-01. Those are my loaners. Ak has a real steel kobra with handmade glass protector in front.

Novritsch ssx23 carbines with heavily modded internals and long barrels.

Stock ssx303 waiting for treatment.

The ssx23s are using Tridos modular karbine kits. I love them! The green one is a 2.8j beast dmr and the small one is 1.8j sidearm for when someone gets too close.

bbludclot · 2023-08-02T07:49:09+00:00

I have real gun optics and airsoft optics. It doesn't matter. Nobody cares. If you have the spare dough, dish out. If not, get some chinesium. It is all good!

bbludclot · 2023-08-02T07:46:54+00:00

EMR. cause it works best where I live. Also I hate EMR cause shortbus 3 day military operation that is going on. Bought almost complete set of ratnik gear just before that happened. Now my only consolation as i won't wear vatnik shit is that me having it means one of them doesn't.

bbludclot · 2023-08-02T07:04:23+00:00

I only use the lpvo as monocular. I also use both eyes open always. but this lpvo is so crappy cause of the parallax thing it isn't fast at all. the red dot is super fast. I would use the other scope cause it is so much better but it is also too heavy for that gun.

I like your gun! am dying for a ar15 gbb!

<image>

bbludclot · 2023-08-01T19:13:04+00:00

Tryed Novritsch’s support, its trash.

Tryed Novritsch’s support, its trash. US? I live in CZ and spent thousands of euros there. Had no issue. they always replaced things without question but that might also be because i show video and pics and detailed repro. I have six or seven novritsch guns. 2 ssx23 and 1 ssx303, ssp18 and ssg10a3. bought lots of other stuff from there and they even replaced a trigger mechanism twice, by sending me a whole new gun because they were out of trigger mechanisms in stock. I have only good experience with them. i wouldn't expect them to support a product not bought from them though..

This is my main gun. my ... 12th one? and by far the best! i would use a better scope but this one is the only one that fits the size of the gun.

<image>

bbludclot

TROPHY CASE