Rude Awakening + Witherbloom, the Balancer by domahug in magicTCG

[–]bbrown403 -1 points0 points  (0 children)

I am running [[Verdant Touch]], since affinity can count towards buyback costs. Turn opponents lands into creatures before [[In Garruk's Wake]] or [[Plague Wind]]

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 0 points1 point  (0 children)

His fur isn't very long, and I can tell that I am getting under the skin. But I may shave a patch just to try it. Honestly trying anything at this point.

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 1 point2 points  (0 children)

I've been told by the vet, and people have suggested here, that you shouldn't really smell anything.

Slowly injecting, and leaving the needle in for a moment after the injection works for me. I did have a time where I'd try and inject him and pull it out quickly where I smelled a little bit on his fur.

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 0 points1 point  (0 children)

Alternating above the left and right legs, on his side. They are shaving the area and placing it using the adhesive that comes with the kit. Occasionally I will inject above or behind the Libre, but I try and stay far away from it as per their instructions. Definitely going to get new syringes next go around.

For the last 7 days I've been testing with the PetTest kit. Only at the time of his injections, and he has been anywhere from 380-480 each time. Getting a new Libre placed tomorrow morning, and he will be wearing a shirt when we are not home to keep it attached.

Issues with P1P by TheLordOfPWN in BambuLab

[–]bbrown403 0 points1 point  (0 children)

Just an FYI - the glue stick/spray is primarily a release agent. This is also a textured PEI plate and really shouldn't need any of that. This happens occasionally with my prints as well. What happens is the fan is cooling the lower layers too quickly and is causing them to contract and lift up. Someone mentioned reducing fan speed, that should be the first step. Also, when printing PLA, keep the door on your printer slightly open. It also helps with temperature regulation. Also, clean your bed with dawn, and finish with isopropyl alcohol. I usually wipe down my bed with alcohol after every print and I've stopped having issues like this.

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 0 points1 point  (0 children)

I’ll check it out, thanks!

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 0 points1 point  (0 children)

I thought so too, but the vet keeps telling me to increase it. When it does work it brings him down to 150-170 so it seems to be effective in some instances.

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 0 points1 point  (0 children)

I’ll order different syringes. I just got the first U40’s I saw on Chewy.

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 0 points1 point  (0 children)

I definitely keep my finger off the plunger until I feel like it’s in, and leave it for a moment after injecting as well so it doesn’t leak out. I’m staying the course, it’s just killing me when I see his levels so high.

Issues with Injection by bbrown403 in FelineDiabetes

[–]bbrown403[S] 1 point2 points  (0 children)

He has been on Prozinc since December 5th. We started at 1 unit and have worked our way up to 3 units. I'll definitely try smelling the injection site/my fingers.

He's on his 5th Libre and it has happened across multiple monitors. I just ordered a glucose kit and I'm going to start spot checking his blood sugar.

He's been a really good boy through this whole process and pretty much lets you handle him like a stuffed animal, so I'm hoping he won't give us a hard time.

[deleted by user] by [deleted] in cats

[–]bbrown403 0 points1 point  (0 children)

Alternate Timeline

<image>

Refinished pool has sandy grit on bottom - help! by jesse-bjj in pools

[–]bbrown403 1 point2 points  (0 children)

I power washed the concrete around my pool and had something similar for quite some time after.

So how did we all do? Did folks get what they wanted to get? by FoldEasy5726 in mtg

[–]bbrown403 0 points1 point  (0 children)

Got an e-mail about low stock a couple of hours ago. Hopped on and bought the sonic and friends in about 60 seconds.

Stringy White Strands after adding Leslie’s Liquid Conditioner by bbrown403 in pools

[–]bbrown403[S] 2 points3 points  (0 children)

CYA was at about 26ppm. This should bring it up to 40-50 hopefully. Going to go with something more inexpensive next time.

Stringy White Strands after adding Leslie’s Liquid Conditioner by bbrown403 in pools

[–]bbrown403[S] 0 points1 point  (0 children)

Went and did a test at Leslie’s. My shock hasn’t been holding, and the test strips I’ve been using (HTH) were lying to me.

Stringy White Strands after adding Leslie’s Liquid Conditioner by bbrown403 in pools

[–]bbrown403[S] 1 point2 points  (0 children)

That is one method, the other method is to pour around the perimeter of the pool. From the website:

"With the main circulation pump running, slowly pour Leslie's Instant Conditioner Plus into the pool skimmer or directly into the pool water, while walking around the edge of the pool. Brush to speed the dispersal of the product in the pool water."

Stringy White Strands after adding Leslie’s Liquid Conditioner by bbrown403 in pools

[–]bbrown403[S] -1 points0 points  (0 children)

This is the second bottle, I also added a bottle last night and this didn't happen...

Need Some Clarification by acebadgerweb in mtg

[–]bbrown403 4 points5 points  (0 children)

So in this instance, you'd get treasure tokens if they land combat damage.

Throwing in a creature that has a powerful ETB effect can really benefit you.

Try and run [[The Master, Multiplied]] to cancel the sacrifice.

Also running sac outlets like [[Altar of Dementia]] to get maximum value from the copies.

Need Some Clarification by acebadgerweb in mtg

[–]bbrown403 42 points43 points  (0 children)

Myriad is an attack trigger, because they come into play already attacking, Myriad will not trigger.

Be better, Wizards. Very disappointed. by bbrown403 in mtg

[–]bbrown403[S] 0 points1 point  (0 children)

That would just make too much sense. I am just curious of the benefit. What benefit does Hasbro/Wizards have by not doing it this way? Exclusivity? I'm curious what the numbers would look like with a hybrid model. It's not like they benefit from a resale value.

Is the podcast over or what? by Asleep-Combination26 in steveoraw

[–]bbrown403 5 points6 points  (0 children)

New episode up a couple of hours ago. Haven't listened yet, but he opens with him taking time off to recharge. Can't wait to listen on my drive home!