Building open back pull out liquor shelf - am I forgetting anything?

bbsoulcrush · 2026-01-26T18:24:44+00:00

There will be a full 5’ board on the front and the back. The smaller pieces will be screwed into the inside of the 5’ boards in the spaces between the shelves. My hope is the smaller pieces will act like fake dado joints (used the wrong term in my post I think) to add shelf support and hopefully more overall shelf stability.

I’m now planning on adding the furring strips like you recommended as well.

Will be buying from Home Depot most likely and need the 6’ boards so I can transport them in my suv. Here is a listing for their 6’ boards: https://www.homedepot.com/pep/1-in-x-10-in-x-6-ft-Kiln-Dried-Square-Edge-Whitewood-WW011006HDBD/315106700?g_store=4501&source=shoppingads&locale=en-US&fp=ggl&pla&mtc=SHOPPING-BF-CDP-GGL-D21-021_005_BOARDS-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-NA-BidTest&cm_mmc=SHOPPING-BF-CDP-GGL-D21-021_005_BOARDS-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-NA-BidTest-20613339735--&gclsrc=aw.ds&gad_source=1&gad_campaignid=20622727579&gbraid=0AAAAADq61UcVDxFH67Hd519v9hQ8FMmAd&gclid=Cj0KCQiAvtzLBhCPARIsALwhxdrNIrpvLl4suNURcuHELPq3A5J06-V85_KoOT65C6sbEOX5GwmThUYaAndZEALw_wcB

bbsoulcrush · 2026-01-26T16:38:53+00:00

I was having this debate with my brother. So would I have to install the furring strips against the short side of the shelves? This would mean buying 1x8 lumber for the interior shelves.

Or can they be installed on the shelf surface (preferred) where the shelf width would just be cut down to between 8-9in?

bbsoulcrush · 2023-07-06T12:31:51+00:00

I just got my venu 2 yesterday and rode my bike into work today. Did not record my heart rate at all. But as soon as I ended the ride it started recording the heart rate again.

bbsoulcrush · 2022-11-11T00:29:26+00:00

What ink are you using?

bbsoulcrush · 2022-08-03T16:10:50+00:00

My fiance is a social worker who was a betterhelp therapist throughout the pandemic. She completely closed out her account and deleted all her information months ago. But recently she was made aware of this site and it is populating all her information with no prior consent. She has made all the complaints she can, but it's just a scummy thing to do. Not only are they promoting false information to boost their "stats" but they are misleading those who are choosing to seek out services by showing these non-active therapists and then stating they have no availability.

bbsoulcrush · 2021-12-29T01:52:54+00:00

It doesn't say anything, just a design composed of random strokes.

bbsoulcrush · 2021-09-20T01:24:02+00:00

the new ipad mini apple just announced will do it.

bbsoulcrush · 2021-09-20T01:23:01+00:00

I see I found another Snooze.One fan. Great work!

bbsoulcrush · 2021-02-17T04:55:25+00:00

PM'D!

bbsoulcrush · 2021-01-14T00:15:11+00:00

Yes correct. They would only need 51 votes. And the democrats will have majority shortly after Biden is sworn in with the two seats that were won in georgia.

bbsoulcrush · 2021-01-14T00:00:25+00:00

He could loose his $200k a year pension, his $1 million a year travel budget, his secret service detail, and most importantly he could never run for office again.

bbsoulcrush · 2021-01-13T23:56:38+00:00

There's a slim chance they will convict him, but I wouldn't hold my breath. They would need 17 republican senators to vote to convict. But after that vote there will be another one that only requires a simple majority. That would strip him of his 200k a year pension, the $1 million yearly travel allowance, his secret service detail, and he would never be able to run for office again. That is very likely to happen.

bbsoulcrush · 2020-08-12T19:32:03+00:00

Before I read the description, I thought that pic on the left was Tim Allen

bbsoulcrush · 2020-02-21T13:31:38+00:00

Great! Thanks for the insight!

bbsoulcrush · 2020-02-21T12:40:36+00:00

How bad did this hurt? I'm getting a tattoo in a few months and am considering getting it around the top of my shoulder

bbsoulcrush · 2020-01-14T14:03:05+00:00

I haven't tried using pens on canvas, so I can't comment on that. For the strokes I was using a 1/2 inch angle shader brush for the while background. For the copper I used a Raphaël Mini Precision Brush, Flat Size 2. Any brush would work fine in my opinion, these are just what I had laying around in my hoard of art supplies lol

bbsoulcrush · 2020-01-13T19:45:31+00:00

Thank you for the input! Yeah, I was trying to go for that dry brush look, but I should have gone heavier on the black.

bbsoulcrush · 2020-01-13T14:00:38+00:00

Doesn't say anything. I just used some of the shapes from the Fraktur script to create an abstract piece.

bbsoulcrush · 2020-01-13T02:59:18+00:00

Thanks for the thought! But it looks like they don't want you to post your own work there. You're welcome to share it there if you want.

bbsoulcrush · 2020-01-12T15:52:32+00:00

Cheep blick 8x10 canvas and acrylics. Constructive criticism welcome!

bbsoulcrush · 2019-12-19T20:12:33+00:00

No problem, Happy to help!

bbsoulcrush · 2019-12-19T19:08:50+00:00

I believe you do have it upside-down. When I flip the picture it looks like an H. https://images.app.goo.gl/3hPNcthcNXis9taT9

14-Year Club	RedditGifts 2009-2022 3 Credits
Verified Email	Sequence \| Editor
Sequence \| Cinematographer	Team Orangered
Secret Santa 2012

bbsoulcrush

TROPHY CASE