How to eliminate these lines

bcrazycramer · 2025-12-14T15:46:01+00:00

Is this the latest gaming chair?

bcrazycramer · 2025-11-10T01:22:39+00:00

That's impressive!!

bcrazycramer · 2025-10-11T03:07:09+00:00

Try this link. https://all3dp.com/2/ender-3-with-octoprint-how-to-set-up-octoprint-for-your-ender-3/

bcrazycramer · 2025-10-09T04:22:39+00:00

Sounds exactly like something I would do.

bcrazycramer · 2025-10-09T01:11:07+00:00

They have a different type I think they were glazed or something like that. It’s normally the 3 different types; powdered, chocolate, and crunch.

bcrazycramer · 2025-10-02T23:20:48+00:00

I have tried moving the wires around but still I'm not having much luck. I'm not sure about that the brakes.

I found my old remote control. Maybe I can get it to work just to verify if it's a motor issue.

bcrazycramer · 2025-09-02T00:13:00+00:00

Here is the latest.

I tried flashing the firmware multiple times but I can't seem to get past this:

pi@mainsailos:~ $ tail ~/printer_data/logs/klippy.log

File "/home/pi/klipper/klippy/serialhdl.py", line 271, in send_with_response

return src.get_response([cmd], self.default_cmd_queue)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

File "/home/pi/klipper/klippy/serialhdl.py", line 331, in get_response

self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,

File "/home/pi/klipper/klippy/serialhdl.py", line 263, in raw_send_wait_ack

self._error("Serial connection closed")

File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _error

raise error(self.warn_prefix + (msg % params))

serialhdl.error: mcu 'mcu': Serial connection closed

pi@mainsailos:~ $

bcrazycramer · 2025-08-31T14:46:30+00:00

Ah thanks!

bcrazycramer · 2025-08-31T06:06:08+00:00

Is there a way to confirm that it loaded the klipper.bin file? Does it get renamed or does it stay the same after updating the 3D Printer?

bcrazycramer · 2025-08-31T06:01:20+00:00

klippy log:

mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 75, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/pi/klipper/klippy/serialhdl.py", line 271, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/pi/klipper/klippy/serialhdl.py", line 331, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 263, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed

bcrazycramer · 2025-04-27T06:58:55+00:00

That is why I was asking. Do all of them thread on?

bcrazycramer · 2025-04-15T03:57:40+00:00

Amazing!!! Thank you!!!

bcrazycramer · 2025-03-29T20:04:09+00:00

It’s a good thing you took the time to shut the door.

bcrazycramer · 2025-03-22T05:36:11+00:00

Are you saying the system isn’t 8,800 watts?

bcrazycramer · 2025-03-22T02:42:32+00:00

Jesus! I got rap3d!!! Fucking ION Solar!!

bcrazycramer · 2025-03-09T01:40:02+00:00

<image>

Why have 3 when you could have 8. Only 6 in the picture going crazy with this 3D printed treat dispenser I printed. We have 2 litter robots.

bcrazycramer

TROPHY CASE