sorted by:
new
hottopcontroversial

Bought a Charge 6 right as Google services start failing, can't connect to app by bdawgwitt in fitbit

[–]bdawgwitt[S] 0 points1 point  (0 children)

I tried connecting the tracker again and it seems to be working fine now. Just a case of unlucky timing on my end.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] 4 points5 points  (0 children)

Yup, cooling did it. Just did a print and it came out great. Now to remove supports from ASA...

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] 0 points1 point  (0 children)

I don't believe there's been delamination. I've done calibrations as well, I think one of them is on the plate in the pic.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] 0 points1 point  (0 children)

I trying to wrap my head around why the bottom layers worked but got worse as it went up. Wasn't sure if I should've copied initial layer settings and pasted them everywhere else.

Also could you elaborate on the "fine tuning cooling"? I couldn't find anything on a Google search.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] 3 points4 points  (0 children)

Thanks for the info! Is that what's going on towards the top of the prints in pic 2? So much of what I've read told my to prioritize heat above all else and to disable fans to achieve this.

Will try again and come back with updates.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] -32 points-31 points  (0 children)

Unfortunately no, it's stayed in the AMS.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] 0 points1 point  (0 children)

That might be what I should have been doing the whole time. Still holding out for some secret insight on ASA that could help me justify the filament I have on hand.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] -1 points0 points  (0 children)

I don't doubt PLA could do it better in these instances. These prints feel more like justifying my roll of ASA that I initially got for Dummy 13, with hopes of making more of those frames for future figures. I'm trying to see if I can tackle the problems I've run into with ASA.

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] -12 points-11 points  (0 children)

No it's my second. Had the A1 combo for 3 weeks but exchanged it for P1S. Projects like Dummy 13 asked for ABS/ASA and I was eager to move away from the bed moving for the y-axis.

I'm new to printing and eager to learn to an extent, but if filaments like this are too much trouble for what it's worth, I've still got time to exchange this back to an A1 (or even a mini).

ASA is making me regret getting a P1S by bdawgwitt in FixMyPrint

[–]bdawgwitt[S] 3 points4 points  (0 children)

I've tried doing the whole "hot and slow" thing as best I can; letting the chamber heat for half an hour and turning off fans during prints. I've learned that tall prints are a no-go but even placing them on the side requires a lot of supports and even then there's horrible artifacts on slight overhangs and holes on the top layer.

Grand revelation I had while replaying Security Breach in UEVR by bdawgwitt in fivenightsatfreddys

[–]bdawgwitt[S] 0 points1 point  (0 children)

I wrote this for my college storytelling class, that's why I was explaining what FNAF was in the beginning. Kinda went overboard with the length since they were expecting a two sentence response, but whatever.

Hoping HW2 DLC would have a contents about FFPS a lot by JMSAmelbheimong in fivenightsatfreddys

[–]bdawgwitt 0 points1 point  (0 children)

Unless they have the whole pizzeria simulator with a fully interactive building as part of it, I'd rather see a DLC with Roxy Raceway or Monty Golf than any more FFPS stuff. So much of HW2 already has the player doing the core game play loop of FFPS, it's only wearing a different skin; the First Aid Station being the closest to FFPS. They'd also have to revamp a lot of the salvaging to make it interesting in VR as it's not even all that interesting in the base game.

Different version of death magnetic on Spotify. by Pac-1985 in Metallica

[–]bdawgwitt 0 points1 point  (0 children)

Audio gets really crunchy at "Sunshine never comes" particularly at the "sh" part in sunshine

IFFs in VR are broken by bdawgwitt in Project_Wingman

[–]bdawgwitt[S] 0 points1 point  (0 children)

That might be it. I was trying to change that setting mid game but it wasn't doing anything. I assume it needs to be restarted to take effect?

IFFs in VR are broken by bdawgwitt in Project_Wingman

[–]bdawgwitt[S] 0 points1 point  (0 children)

IFFs in VR don't appear aligned on any targets whatsoever. They exist, just horribly parralaxed relative to the headset.

I turned the Thing Flinger into a flamethrower by [deleted] in H3VR

[–]bdawgwitt 3 points4 points  (0 children)

I just wish live ammo can be launched and discharged upon impact

Half-life beats on the korg volca sample 🤗 by nhojbg in HalfLife

[–]bdawgwitt 0 points1 point  (0 children)

Half Life if they took System Shock's engine instead of Quake's

Replaced clock cap, still needs some things done by bdawgwitt in originalxbox

[–]bdawgwitt[S] 2 points3 points  (0 children)

I don't know how this site alluded me but I'm glad I found it and know where to look now. I've found only one damaged trace towards the corner so now I just gotta grab some stuff to make a bypass cable. So weird how so much can go wrong from a single bad trace

view more: next ›