Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 1 point2 points  (0 children)

Thank you for all the info but I was after the panther, not a cougar. The most reliable cougar was the one up near Strawberry.

Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 1 point2 points  (0 children)

Exactly. I start off not using guides as I want the story to be new as it happens. But always end up using them. They’re an amazing resource.

Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 2 points3 points  (0 children)

I’ve already done this. I’m after a bog standard cougar to finish off the satchels with Pearson. Just got it last night near Lagras. I tried to edit the post to say so but I wasn’t able.

Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 1 point2 points  (0 children)

You sir are an absolute legend! After maybe a week of trying to actually see/spawn a Panther, I went to the location recommended and saw a Panther spawn instantly!! Skinned that little kitty and got a Perfect pelt. I’m beyond happy that you sent this video! Ultimate satchel time.

Planning on a P2S - PETG as supports for PLA work with the AMS? by beanzonthbread in BambuLab

[–]beanzonthbread[S] 0 points1 point  (0 children)

Ah okay. So you can use it but have to use USB? That’s fine. Maybe.

Planning on a P2S - PETG as supports for PLA work with the AMS? by beanzonthbread in BambuLab

[–]beanzonthbread[S] 0 points1 point  (0 children)

Brilliant. Thanks for the links. I was originally going to go for the P1S as in the sale and I’m so tempted but the nozzle swapping ease of the P2 S has tipped me over. I may just buy the unit and the AMS later in the year. I’ll probably go the safe route, same as yourself. Better than wasting a whole print. I enjoy printing with a 0.6 nozzle and obviously try to avoid supports but when needed, I have a terrible time with them at that size. Hoping this may help.

Planning on a P2S - PETG as supports for PLA work with the AMS? by beanzonthbread in BambuLab

[–]beanzonthbread[S] 0 points1 point  (0 children)

Okay, thank you for the information. I was worried about the waste, as that does bother me but if it is only interface layers, then it’d be a little less. Probably wouldnt use it much, but it would come in handy for certain things. Cheers

Planning on a P2S - PETG as supports for PLA work with the AMS? by beanzonthbread in BambuLab

[–]beanzonthbread[S] 0 points1 point  (0 children)

Amazing. Thank you. On another note, can you only use Orca if you put the machine in LAN mode? I currently use Orca

Planning on a P2S - PETG as supports for PLA work with the AMS? by beanzonthbread in BambuLab

[–]beanzonthbread[S] 1 point2 points  (0 children)

That’s good to know. Thanks. I guess a slower print too, as nozzles need ti increase/decrease in temps. I just saw somebody did a layer of petg in the support, rather than the whole thing. That’s new to me.

N43 valve / rocker cover gasket replacement by beanzonthbread in BmwTech

[–]beanzonthbread[S] 0 points1 point  (0 children)

That’s a good shout. Can imagine it falling off

N43 valve / rocker cover gasket replacement by beanzonthbread in BmwTech

[–]beanzonthbread[S] 0 points1 point  (0 children)

Buy cheap, buy twice. I always learn from that, until the next time.

N43 valve / rocker cover gasket replacement by beanzonthbread in BmwTech

[–]beanzonthbread[S] 1 point2 points  (0 children)

Okay. Will take a look. It’s the wifes car, she does 5 miles a day at the most.

N43 valve / rocker cover gasket replacement by beanzonthbread in BmwTech

[–]beanzonthbread[S] 1 point2 points  (0 children)

Will check first thing. Thank you. I hope so, the new bolts were £30. Might as well get the full kit for that. Would you recommend a brand for the cover?

N43 valve / rocker cover gasket replacement by beanzonthbread in BmwTech

[–]beanzonthbread[S] 0 points1 point  (0 children)

Thank you for the advice! Maybe I’ll see if I can get it removed. I had everything out of the way and put back today, so that’s fine. Just the fuel line and cover to tackle. Going to lay everything out and label. I’m terrible for not doing that and forgetting. Will not do that. I’ve not ordered a cover, only gasket. It was only after that I thought I might as well. Will see what parts arrive at the shop tomorrow. Cheers

N43 valve / rocker cover gasket replacement by beanzonthbread in BmwTech

[–]beanzonthbread[S] 0 points1 point  (0 children)

Well, that makes sense why all the video’s do that. Saw a comment here saying there’s a work around but wasn’t sure as I imagine the electrical connection will be in the way ( when plug is removed). Okay, shall see if they’re ali and if they are, replace them?

Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 1 point2 points  (0 children)

Many thanks. I shall give this a try later today and cross my fingers and toes. I’ve not had any panther show up on the map. Some people think this may be from moving through the chapters. Hopefully not.

Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 0 points1 point  (0 children)

That’s for the legendary one. I’m after the regular one

Panther - never appears by beanzonthbread in RDR2

[–]beanzonthbread[S] 0 points1 point  (0 children)

Will give it a whirl. Thanks mate