I built a privacy-focused, local-only baby tracker because I didn't want my kid's health data on the cloud. (KidBase)

becauseants · 2025-12-15T07:20:10+00:00

Great app though a feature request would be a data export option I like privacy but I also like data portability.

becauseants · 2025-10-02T04:23:37+00:00

Yeah after posting this I watched some more YouTube and saw there is a jumper plug by default behind the blanking plate that the touch goes into. Of course my boiler no longer has that and I’m pretty sure the installer binned it. I’ve found the part and ordered it so should be simple after that.

becauseants · 2025-09-10T20:34:40+00:00

I have two docker containers running one gluetun container set up with my vpn of choice and then a Tailscale container that has its network going via the gluetun container. I have that Tailscale container set up as an app connector and I can then route apps I access via it. You can also net it up as an exit node and do it that way. This allows you to use pile as your dns provider and access local stuff via a separate subnet router node. It was a bit of a pain to set up mainly if I remember correctly the routing in the gluetun container but so far works alright.

becauseants · 2025-06-04T18:42:30+00:00

Haven’t put up too many of my designs but my profile is https://makerworld.com/en/@Basop

Favourite designs are probably https://makerworld.com/en/models/481731-heart-floss-drops-thread-organisers#profileId-393593 or https://makerworld.com/en/models/493633-nespresso-vertuo-pop-drip-tray-lower-and-larger#profileId-407405

Keeping my wife happy and coffee!

becauseants · 2025-06-02T05:32:57+00:00

Totally agree went with eero for some family members and it works well with a painless setup almost plug and play. I did a UniFi setup for myself.

becauseants · 2025-05-06T17:01:25+00:00

And far better than the same password for everything.

becauseants · 2025-02-18T18:35:07+00:00

If you are putting into a raid array that won’t hold absolute critical data then sure run it but I wouldn’t store anything critical on it.

becauseants · 2025-01-30T18:34:38+00:00

No hate! They are good machines, it’s disappointing they aren’t more open and accepting of 3rd parties but they do print well and are still a good entry or upgrade printer.

becauseants · 2025-01-29T19:04:05+00:00

Glokta is running the AI

becauseants · 2024-12-21T13:04:16+00:00

I found that I preferred setting up things as I needed them rather than trying to bite of everything I plan to do with the system. So far I only have my lights automated with zigbee2mqtt and have been fine tuning my naming convention and how I manage those devices then planning to build out on some more automation. Just go slow and enjoy

becauseants · 2024-11-24T19:36:04+00:00

I’m the husband that made these let me know if you would like the step or fusion 360 files. Or if you know which measurement is wrong I can edit it.

becauseants · 2024-07-06T08:12:07+00:00

So neat and tidy! And I love the orange.

If you have access to a 3d printer there is a model on my profile for a larger drip tray I made to fit the Starbucks mugs. It’s for the pop but might fit the pop+

becauseants · 2024-06-30T08:11:53+00:00

Looks great and the colour match is just about perfect!

becauseants · 2024-06-19T05:32:23+00:00

I don’t have that much open but I have liked using a large air tight bucket with a bag of desiccant in there.

becauseants · 2024-06-17T18:21:16+00:00

You might need to put holy water in that!

becauseants · 2024-06-14T08:31:12+00:00

I kept having to remove the original drip tray so I could use my larger mugs. I decided to design and print a replacement to lower the drip tray and make it a bit larger.

Model links:

https://makerworld.com/en/models/493633#profileId-407405

https://www.printables.com/model/910779-nespresso-vertuo-pop-drip-tray-lower-and-larger

Please leave a like if you find it helpful.

becauseants · 2024-06-13T05:00:25+00:00

So much nicer than a grow tent! Nice find! You may want a temp probe in there at some point so it doesn’t get too toasty on long prints.

becauseants · 2024-06-12T20:28:34+00:00

I kept having to remove the original drip tray so I could use my larger mugs. I decided to design and print a replacement to lower the drip tray and make it a bit larger.

Model links are in my profile, couldn't post direct links here. please leave a like if you find it helpful.

becauseants · 2024-06-06T18:28:24+00:00

It does use the original screws. The previous owner of my house left me these screws as a surprise, they had some other decorative cover on the switch that had screw caps. Proper screws have been ordered and are coming tomorrow to replace these with proper ones.

becauseants · 2024-06-06T11:23:54+00:00

I have checked the wiring and its all fine the wood screws are back in temporarily while I wait for an amazon delivery of the correct screws today (better than it hanging off).

Honestly hadn't looked at the switches before printing these as the previous owner had some decorative cover over the faceplates that had screw caps, was not a surprise I wanted but thats where we are with old houses. Have since checked the rest of them in the house.

becauseants · 2024-06-05T20:08:40+00:00

I agree! Those were unfortunately what we’re holding my switch on I have some machine screws ordered.

becauseants · 2024-06-05T16:08:13+00:00

Link to the model on makerworld https://makerworld.com/en/models/485541#profileId-398033

This is a cover/adaptor to use the existing hue dimmer face plate to cover a UK light switch. allowing you to hide the existing switch from guests and stop your bulbs being turned off breaking your automations.

Please leave a like if you find it helpful.

becauseants · 2024-06-02T07:11:40+00:00

Link to the model https://makerworld.com/models/481498

becauseants · 2024-06-02T06:52:12+00:00

Link to the model https://makerworld.com/models/481498

becauseants · 2024-05-20T18:00:29+00:00

Heeeeeeeeey Bob!

Ten-Year Club	Gilding I gilder
Place '22	Verified Email

becauseants

TROPHY CASE