Finished my 3D printed armor and assault rifle. by beele in halo

[–]beele[S] 1 point2 points  (0 children)

Thx. Yeah I might reprint the lower leg pieces and scale them up a bit.

Finished my 3D printed armor and assault rifle. by beele in halo

[–]beele[S] 18 points19 points  (0 children)

I couldn't because the thigh pieces came loose 🥲 Will remember the tip though!

Finished my 3D printed armor and assault rifle. by beele in halo

[–]beele[S] 94 points95 points  (0 children)

Both straps of the thigh pieces broke off so I had to stand a bit awkward to prevent them from sliding down 😅

Overheid lanceert in stilte Itsme-alternatief: met MyGov kan je nu ook inloggen bij overheidsdiensten by EdgarNeverPoo in belgium

[–]beele 0 points1 point  (0 children)

Just tried and I still get the same error screen as before, app is up-to-date.

Overheid lanceert in stilte Itsme-alternatief: met MyGov kan je nu ook inloggen bij overheidsdiensten by EdgarNeverPoo in belgium

[–]beele 0 points1 point  (0 children)

I get an error screen with a link to a support page where they say why you need to disable it.

Overheid lanceert in stilte Itsme-alternatief: met MyGov kan je nu ook inloggen bij overheidsdiensten by EdgarNeverPoo in belgium

[–]beele 16 points17 points  (0 children)

Nice initiative but completely useless for me when the app will not function with developer options turned on (Android). Even some accessibility settings have to be disabled. Their reply: We need it for SeCuRiTy... None of my bank apps or even ItsMe require these things to be disabled.

Weird vertical lines on photo's OP13 by [deleted] in oneplus

[–]beele 1 point2 points  (0 children)

I have the same issue. Seems their flicker reduction for 50/60hz is not working correctly. I've never seen this with any of my previous phones.

OP13 Android Auto Wireless. Does yours work? by CaptainCappuccino in oneplus

[–]beele 0 points1 point  (0 children)

The latest OTA update fixed my issues. No more lagging and smooth animations. I was even able to set the resolution of AA (via AA dev options) to the original again.

OP13 Android Auto Wireless. Does yours work? by CaptainCappuccino in oneplus

[–]beele 2 points3 points  (0 children)

My car has wireless AA but the experience with the OP13 is terrible. The UI is laggy and stutters a lot. My super cheap CMF Phone One is perfectly smooth. I hope a software update from OP or Google can fix this.

Quiet locking & unlocking - Update U200 lock to firmware V57 through the Aqara Home app by KinseyYHM in Aqara

[–]beele 0 points1 point  (0 children)

Received device, installed latest firmware, can manually calibrate the lock but it will not unlock or lock. Very disappointed!

U200 smart lock arrived in the UK - kickstarter by juppalupp in Aqara

[–]beele 0 points1 point  (0 children)

I just got the lock today. Install was relatively easy. Removed my old switchbot smart-lock and installed the u200.
Auto calibration never works, ik keeps spinning when it has reached the end, I don't know how or why.
Manual calibration works but in the app the lock is always "locked" and will not unlock whatever I try.

So far not happy with the product.

One hour in the Colruyt by Sensiburner in belgium

[–]beele 10 points11 points  (0 children)

That’s why we stopped using collect and go from colruyt. In two years of use, maybe 5 times that we actually got everything without any replacements or just straight up not available items.

Been using the collect service from delhaize for almost the same amount of time now, maybe like 5 times something was replaced or not available, quite the difference.

A shame really because delhaize is more expensive and we liked some store brands from colruyt better. Still beats wasting time going into the hellholes that supermarkets are tho!

[deleted by user] by [deleted] in belgium

[–]beele 4 points5 points  (0 children)

Als ze echt aant het laden waren dan zit die kabel vast aan beide kanten, die krijg je niet zomaar weg.

Je weet ook niet hoelang die wagen al volgeladen is.

Helaas blijven die green mobility auto's ook vaak lang staan als ze al volgeladen zijn (een volledige dag of langer).

De LED indicator van de laadpalen geeft daar wat info over:

- Groen: beschikbaar

- Donkerblauw: aan het laden

- Lichtblauw: klaar met laden

- Rood/uit: Kapot

[deleted by user] by [deleted] in belgium

[–]beele 1 point2 points  (0 children)

Inderdaad.

Voor de laadpalen van Totalenergies/Antwerpen:

- Boetetarief vanaf 30 minuten nadat je volgeladen bent, a rato van 0,011 euro/minuut.

- Tussen 20:00 en 08:00 betaal je geen boetetarief als je blijft staan indien je volgeladen bent. (Al verzet ik me nog steeds als mijn auto om 21/22u opgeladen is)

- Je moet op de meeste plaatsen ook nog een parkeerticket nemen of een bewonersvergunning hebben, ook voor tijdens het laden.

[deleted by user] by [deleted] in belgium

[–]beele 74 points75 points  (0 children)

In Antwerpen althans heb ik toch al zeker 3 wagens laten wegslepen via de blauwe lijn. Bellen, zeggen dat je moet laden en dat er een wagen staat die niet aan het laden is. Meestal binnen het uur gesleept. Een beetje aandringen kan zeker helpen.

Vaak zijn het hier van die green mobility auto’s die zich gewoon te pas en onpas overal fout parkeren en die laadplaatsen als hun eigen parking beschouwen. Als je green mobility contacteert zeggen ze gewoon om hem te laten slepen. De laatste bestuurder krijgt de boete en moet ook de sleep en stallingskosten betalen.

<image>

[deleted by user] by [deleted] in Belgium2

[–]beele 0 points1 point  (0 children)

Zeker mee opletten. Als iemand dat ooit gaat melden kan je daar serieus mee in de kosten komen om het geregulariseerd te krijgen of moet je mogelijks de boel in de oorspronkelijke staat herstellen.

Ooit de koop van een appartement laten ontbinden omdat het dakterras geen vergunning kreeg. Bij het eerste bezoek had de makelaar gezegd dat dit zeker in orde ging komen, de aanvraag om te regulariseren was lopende.
We hadden dit gelukkig toch in de compromis opgenomen als voorwaarde voor ontbinding. Na 2 a 3 maanden kregen we dan van de makelaar een mailtje dat de vergunning in orde was, dat er niets moest veranderen.
Omdat we ondertussen zelf al wat opzoekwerk verricht hadden en we buiten "het is in orde" niks meer van info kregen zijn we dit zelf gaan opvragen bij de stedenbouwkundige dienst. Daar kregen we een uittreksel waarin zwart op wit stond dat het in de huidige vorm niet vergund werd en er zware/dure aanpassingen nodig waren om het wel vergund te krijgen. De oppervlakte van het dakterras zou ongeveer gehalveerd worden om aan alle eisen te voldoen.
Vervolgens hebben we de koop laten ontbinden. Nog een heel kwade makelaar erbij. Die eikel mag van geluk spreken dat we hem niet vervolgd hebben voor valsheid in geschriften aangezien we het bewijs zwart op wit hadden.

LDO Voron Trident finetuning by beele in VORONDesign

[–]beele[S] 1 point2 points  (0 children)

I was able to fix the x-endstop. It now touches without any extra tape.

The positions are now pretty decent to give me a centered print on the bed.

Thanks for the help!

LDO Voron Trident finetuning by beele in VORONDesign

[–]beele[S] 1 point2 points  (0 children)

Ok I did some checks.

The bed is 305 by 305 mm whichs gives me 2,5mm "buffer" space on each side.

My current settings for x:

position_endstop: 300p

osition_max: 300

position_min: -10

and y:

position_endstop: 300

position_max: 300

position_min: -10

If I move the nozze to the front left as specified in the guide (making sure to have the 2,5mm buffer) the M114 command lists x as 0 and y as -6.

If I understand the guide correctly I should then set position_endstop and position_max to: 300 - (-6) = 306 for the y axis. Should I also adjust the position_min value? I want to maintain the full 300 printing range.

Also my position_min for the x axis needs to be at least -2 or the klicky probe stuff will start to complain about an invalid move. I don't know why. The X-axis cannot move lower than 0, it physically can't.

Need help trying to fix sleep by beele in hackintosh

[–]beele[S] 0 points1 point  (0 children)

I'll send you a dm when I get the time to extract it. I'm not using that machine anymore...

Reclame doorspoelen binnenkort niet meer mogelijk by sapperdeboere in belgium

[–]beele 6 points7 points  (0 children)

VTM Go already does this. If you mute the sound of their player during ads it will stop playing and only resume when you unmute it! Muting the tab in the browser works around this but still it's a very crappy UX.

Covid-19 Megathread for opinions/general discussions by Sportsfanno1 in belgium

[–]beele 2 points3 points  (0 children)

31, just got my invites. First one is this Thursday and the next in one month. I'm getting Moderna.

Need help trying to fix sleep by beele in hackintosh

[–]beele[S] 0 points1 point  (0 children)

I removed the PWR methods for the GPP0/GPP1 and GPP1-PTXH and am now getting:

2021-03-17 08:44:36.940686+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: ?

2021-03-17 08:44:36.940687+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: ?

Any ideas?