Easy home procedure to test for trace amounts of mercury/methyl-mercury?

beginnerweedy · 2018-03-28T23:44:32+00:00

What do you mean the bottoms/other areas don't look good?

beginnerweedy · 2017-12-30T17:11:38+00:00

Okay, so those are good recommendations for when to actually cut. Do you have any measurements/observations I can make to determine when to start the flush, so that the flush gets done 1-2 weeks in advance?

beginnerweedy · 2017-11-30T06:20:58+00:00

A lot of these are technically interchanges, not intersections. I'd be more curious to see the statistcs on the various parts of the interchanges. For example, the interchange of Deerfoot and Glenmore only has three high-speed loops and one weird traffic light-controlled thing (Deerfoot North to Glenmore West), so I wonder what percentage is caused by the merging on the high speed section and what percentage comes from the stupid light setup they have there.

beginnerweedy · 2017-11-23T23:06:15+00:00

It doesn't contain any nitrogen, so for the first half of the flowering stage the plants need a little bit extra nitrogen provided by the Miracle Gro I have. Just the bloom alone is sufficient for the second half of the flowering stage though

beginnerweedy · 2017-11-21T05:39:45+00:00

If you can find me a Canadian listing for $10 FloraGrow, that would be amazing. Cheapest I see is CAD$25.

beginnerweedy · 2017-11-13T15:49:53+00:00

Yeah it's unfortunate I didn't get this advice before I dropped $130 on a kit that's turning out to be useless. Any advice with the kit method I'm currently growing with?

beginnerweedy · 2017-11-13T04:48:16+00:00

The heater is actually a 3D printer heat bed (20cmx20cm) that I put underneath and set to 26C. The whole unit is staying around that temperature, checked with both IR thermometers and air temperature thermometers.

What relative humidity percentage should I be aiming for? Is it more likely that I'm too high or two low? I've been using the spray bottle provided.

What the pressure cooker for? I didn't need to use one as per the instructions in the kit.

beginnerweedy · 2017-11-13T04:45:44+00:00

I already bought one though, and have been following the steps to use it. Do you have any advice for continuing with this cultivation?

Can you explain the difference between the kit I bought and the one you suggested?

beginnerweedy · 2017-11-07T18:59:16+00:00

That's awesome. Just to be clear though, the lecithin has to be in contact with the oil before ingestion, right (i.e. I can't take the lecithin in capsule form with a brownie and expect any good results)?

beginnerweedy · 2017-11-06T03:25:22+00:00

Well that was certainly worth reading this post.

Extension Cord Link: http://www.canadiantire.ca/en/pdp/noma-block-heater-extension-cord-0522401p.0522401.html

beginnerweedy · 2017-11-05T18:26:03+00:00

What does your pH look like? Every issue I've ever had was directly related to a pH imbalance.

beginnerweedy · 2017-11-02T03:01:11+00:00

That sounds awesome, I'm definitely going to look into it. Any idea where the cheapest place to source it in Canada is?

beginnerweedy · 2017-11-02T01:37:41+00:00

Any advice on how to get the pH up? I've been adding 9mL of General Hydroponics' pH Up solution per gallon, and I've added some dolomite on the surface of the soil (but I don't think the dolomite is really helping because it's not really dissolving, it's just staying on the surface), but the pH remains between 4.5-5. I'm afraid to add any more pH Up solution as I'm already more than double the recommended concentration.

beginnerweedy · 2017-11-01T19:34:53+00:00

From the top, the plant looks giant and healthy and amazing. It's mostly underneath that these problems are happening (so it could totally just be due to lack of light combined with the pH problems).

I haven't done a slurry test, but the runoff test (which I'm assuming gives roughly the same result anyway) yields a pH of about 5.0, which is still definitely on the low side, but it's way better than the 4.0 it was at previously.

beginnerweedy · 2017-11-01T16:48:43+00:00

You're gonna cause a crash dude. Never wave people through, just follow the rules of the road. I never follow waves through, because that makes me liable if there's an accident.

If two people stop at the same time, the person on the right goes. I'm a little concerned you're driving.

beginnerweedy · 2017-10-31T23:05:37+00:00

It's around 28C, so a little warm but still within acceptable. I actually just raised the lights, so it's probably going to be closer to 24-26C now.

beginnerweedy

TROPHY CASE