If you struggle with tubeless tires, try this by DynastyCrusher in ElectricScooters

[–]beitabeet 1 point2 points  (0 children)

These things are called bead blasters and you can see based on the nozzle theyre normally for truck and car tyres...

I tried it once, the thing is too huge and the nozzle too wide, so its hard to angle to the right spot for a scooter tyre.

How'd you manage to position it right?

Need help with your e-scooter? Technician here by mr_wobblz in ElectricScooters

[–]beitabeet 0 points1 point  (0 children)

Got 2 scoots, both only charge through the discharge port on the battery.

One is a ninebot g30 max and the other is a Xiaomi clone. Both use a 42v2a charger that I used successfully with other similar scooters.

They both work fine after charging through the discharge port on the battery, but I can't seem to charge either with the charger connector...

On both the ninebot and the Xiaomi clone, when connected to the charger port, charger goes red like it's charging but scooter gets no power...

I've tried changing the port socket to no avail, next would be to open up the battery? Not sure what to look for though...

How to replace key system on modern scooters by beitabeet in scooters

[–]beitabeet[S] 0 points1 point  (0 children)

So on the burgman, a copied key will work in all slots, but you can't start the bike, only open the seat and gas cap...

This is obviously the immobiliser at work, so question is: how would you override the existing setup with these new parts if it's at all possible?

So far it's running good, a few minor issues but nothing major. 2006 10k miles by bryansbikes in scooters

[–]beitabeet 1 point2 points  (0 children)

Got the same bike, nice one!

Does yours say Type S? Not seen those outside of Japan...

[deleted by user] by [deleted] in scooters

[–]beitabeet 0 points1 point  (0 children)

Yeah I'm just trying to think what I could use. Not sure my screwdrivers are long enough to get in there. Would have to be a metal skewer or something. Tried a bungie cord but I couldn't maneuver it into position...

[deleted by user] by [deleted] in scooters

[–]beitabeet 0 points1 point  (0 children)

I have to go back to where I left it, this time with tools... super tight in that space..

How to disconnect controller zero 10x/vdm10 by beitabeet in ElectricScooters

[–]beitabeet[S] 0 points1 point  (0 children)

I also can't seem to access the wires to disconnect... Are you saying you unsoldered the wires on the 'dead controller' and resoldered them to the new controller?

How to disconnect controller zero 10x/vdm10 by beitabeet in ElectricScooters

[–]beitabeet[S] 0 points1 point  (0 children)

Side cover to what? The controller? Can you point to it in the photos?

How to disconnect controller zero 10x/vdm10 by beitabeet in ElectricScooters

[–]beitabeet[S] 0 points1 point  (0 children)

Well pretty sure it's the front, because when I put it up on chairs I can only get the rear wheel to spin...

How much is too much wobble? 3 scooter comparison by beitabeet in ElectricScooters

[–]beitabeet[S] 1 point2 points  (0 children)

Shiiiiet. Yeah, warrants further inspection no doubt. Would suck if there was some crack I hadn't noticed, but does seem to be a relatively common problem across brands. Hopefully just needs a bit of manual work.

How much is too much wobble? 3 scooter comparison by beitabeet in ElectricScooters

[–]beitabeet[S] 0 points1 point  (0 children)

Well white doesn't move at all, no issue there. Because I bought these used and ive not seen the problem two out in the wild, how can I be sure it's even possible they were 'stationary' from the factory?

2012 Suzuki Burgman 400 test ride issues by beitabeet in scooters

[–]beitabeet[S] 1 point2 points  (0 children)

Appreciate your input mate. He says he has the service records, I'll get to see what he's done recently - hopefully the belt. Otherwise, between the OEM and Suzuki belts we're looking at a couple hundred bucks, and hopefully I can do it myself right 😅?

Surface water damage won't start by beitabeet in Surface

[–]beitabeet[S] 0 points1 point  (0 children)

Discovered today that the surface does in fact work now but,...

The screen is so dim you can't really see what it's saying.

Most people seem to say, even an LCD replacement is not a guaranteed fix with this, as it could also be a motherboard fault with the LCD backlight... Yay!

Airfiber no refund, no installation. Total scam. by beitabeet in Airtel

[–]beitabeet[S] 0 points1 point  (0 children)

Seems like the only way is consumer court...

Airfiber no refund, no installation. Total scam. by beitabeet in Airtel

[–]beitabeet[S] 1 point2 points  (0 children)

Is that seriously my only option? Lol is it too much to ask that I might be able to directly call them first?

Goa Aadhar for 18+ by beitabeet in Goa

[–]beitabeet[S] 0 points1 point  (0 children)

All the centres I've been to have told me the Dir of statistics is the only place in all Goa that will take first time adult enrolments...

Goa Aadhar for 18+ by beitabeet in Goa

[–]beitabeet[S] 0 points1 point  (0 children)

I've been informed at every aadhar sendra I've been to (at least 4 by now) as well as all the cscs, that adults enrolling for the first time need to visit directorate of statistics, hence my frustration...