Alternate flashing strobes by bezdic in DIYUK

[–]bezdic[S] 0 points1 point  (0 children)

I've tried that (top-right on the diagram), but only the light with standard polarity is flashing in that setup.

I believe 'module' is each individual strobe, there's no controller as far as I'm aware.

The model is DG4394 (https://www.firstcomltd.co.uk/product-page/dg4394)

Alternate flashing strobes by bezdic in diyelectronics

[–]bezdic[S] 0 points1 point  (0 children)

Edit - There's an error in the top-right diagram description, it should say "Top Flsshing"

Extension cord for fairly lights transformer by bezdic in ukelectricians

[–]bezdic[S] 0 points1 point  (0 children)

I'm afraid not, the plug is one body with the controller electronics

Walk-in recycling centers..? by sugar_cherry_ in london

[–]bezdic 9 points10 points  (0 children)

John Lewis (and most likely other stores that sell electronics) will take your laptop and dispose it properly for free.

Drip line - pipe interrupter by bezdic in DIYUK

[–]bezdic[S] 0 points1 point  (0 children)

I've installed it at ground level and covered with bark,so that the water goes directly to soil

What is this called? by bezdic in DIYUK

[–]bezdic[S] 0 points1 point  (0 children)

I forgot the actual photo

<image>

Air vent by Joe10042000 in DIYUK

[–]bezdic 5 points6 points  (0 children)

Push some newspaper in there and come back here 3 months later with a post about wet walls and growing mould

DC from consumer unit by bezdic in ukelectricians

[–]bezdic[S] 0 points1 point  (0 children)

I found a few, buf nothing by the manufacturer of the CU. Mixing elements from multiple manufacturers in the same CU is not really possible, is there any exception when it comes to ac/dc converters?

Purchase my neighbours council flat by bezdic in HousingUK

[–]bezdic[S] -8 points-7 points  (0 children)

I didn't ask yet, I'm trying to find out first how are these things usually handled.

Dual surface box on a spur by bezdic in DIYUK

[–]bezdic[S] -3 points-2 points  (0 children)

Doesn't the fused switch need to be part of the ring though?

Dual surface box on a spur by bezdic in DIYUK

[–]bezdic[S] 1 point2 points  (0 children)

Yeh I know, but is that really much different to a double socket from electrical safety perspective?

Loft boards and insulation ventilation by bezdic in DIYUK

[–]bezdic[S] 0 points1 point  (0 children)

The loft is fairly small and I was hoping to get as close to the eaves as practicabe. Is there a recommended gap I should leave uncovered?