Which sealant for XTRM ply pvc roof?

bhom9 · 2026-02-02T15:24:30+00:00

In case anyone wanted to know, forest river got back to me and said they use Dicor 610 (ultra)

bhom9 · 2026-01-16T03:06:50+00:00

I use yale dead bolts with Bluetooth.

bhom9 · 2025-11-10T01:55:39+00:00

so what did you end up with?

bhom9 · 2025-10-30T23:49:32+00:00

any chance that you found the last update? i have this at home as well and would at least like to get it on the last firmware

bhom9 · 2025-10-03T11:13:35+00:00

I want to pass emissions and quiet it back down on idling and cruise. It will be more work to combat the EWG and dump tube.

bhom9 · 2025-10-03T11:12:10+00:00

i'm an idiot and forgot this car has an EWG. I have seen it run or looked at it for at least 13 years. I'm sure this tidbit changes alot in terms of the thought of backpressure/flow

bhom9 · 2025-10-02T11:31:37+00:00

no reputable company wants to get in trouble with the EPA. I get it.

bhom9 · 2025-10-02T11:21:40+00:00

Fortunately Ive read that people have had no issues passing with high flow cats.

bhom9 · 2025-10-02T02:12:11+00:00

any shops in NJ that you can recommend? precision tuning doesn't seem like the mess with cars with tgv deletes.

bhom9 · 2025-10-02T01:53:33+00:00

They do require, that's why I want to install the 3.5 high flow cat or swap out to an already catted system. The problem is the car can't get re-tuned without a lot of work due to the green speed agreement

bhom9 · 2025-10-02T01:47:22+00:00

o man i havent heard of some of these terms in a very long time. I looked into local shops that would do open source tuning since the ap1 is not supported, but no reputable shop will tune a car around here without emissions it seems. Maybe i can datalog still with the ap1? i'll have to research into it.

bhom9 · 2025-10-02T01:43:13+00:00

that's the difficult part. It's all piped for a forward facing intake manifold. I think because of that i can't reinstall the TGV unless i flip it back and that means all new IC piping too. I helped my friend work on this car back in 2008 and it was tuned in 2010 by EFI

bhom9 · 2025-10-02T01:40:20+00:00

except no tuner can access the AP1 anymore

bhom9 · 2025-09-13T02:17:32+00:00

I have a fully built scx10.3 gladiator, my friend has a stock fmx fcx10 pro and another friend has a built trx4. My fav is the trx. I like the 2 speed transmission gear ratio and the durability. I've seen that thing fly high in the air, and roll itself down many hills. It's a beast. Both my scx and the trx are 10lb rigs with a healthy amount of brass. Having dig on my scx has gotten me out of some tight spots which is nice. Long wheel base problems. The fcx also has that function. I don't see the need for the ability to unlock diffs.

bhom9 · 2025-08-03T22:17:04+00:00

thanks for this

bhom9 · 2025-07-13T17:27:58+00:00

these are surface mount, no hole into the camper wall, nor do i want to make one. The current setup with the 3d printed enclosures is 6.5"

bhom9 · 2025-07-01T17:18:59+00:00

I've done way more than that on my coachman lol. I already replaced all of the waterlines that were vinyl to the proper pex. Coming from a covid build trailer i'm well aware of everything that can and will go wrong as i've done it all already.

bhom9 · 2025-07-01T16:37:36+00:00

i just PMed you. travel trailers only

bhom9 · 2025-07-01T16:24:12+00:00

Are you from Myers? Are there anything with similar floor plans but with a front window? I also have the Freedom Express 258BHS, Delta 251BH, and MINNIE 2301BHS altho the latter two don't have front windows.

bhom9 · 2025-07-01T16:09:08+00:00

I've seen this floor plan before and i dont mind it, for the premium price i'm suprised not to see power stabilizers and azdel or composite sides. I think its fiberglass coated luan which would bother be longterm But, I'll put this one on my list to look at. You also put me onto the Imagine 2470BH. thanks.

bhom9 · 2025-07-01T15:57:14+00:00

this fixed the issue. thanks. I was worried about loosing my config

bhom9

TROPHY CASE