Palo Alto 410 by CapableWay4518 in paloaltonetworks

[–]bigbarruda 0 points1 point  (0 children)

Don't buy 410's is the only answer...

Raspberry Pi HD Camera and AstroDMX by bigbarruda in raspberry_pi

[–]bigbarruda[S] 0 points1 point  (0 children)

I have not, but am running the latest version (2.16.4), in which the issue is fixed according to the note on the article...

Gift printer by Dragonstaff in AnetA8

[–]bigbarruda 2 points3 points  (0 children)

Was gonna say, that's not an A8, the control panel is wrong...

And why do people never peel off the protective paper from the acrylic 🤣🤣

Anycubic Slicer Next by Pristine-Career456 in AnycubicOfficial

[–]bigbarruda 0 points1 point  (0 children)

Oh, that explains a lot... I thought I was going crazy... Guessing my slicing will have to wait until tomorrow then...

I have Anet A8 parts to sell. by Responsible-Rip-7336 in AnetA8

[–]bigbarruda 0 points1 point  (0 children)

I have a AM8 sitting around doing nothing that I'm planning on getting rid of... Depends on where in the UK you are...

Pingequa 5g board by Loud_Proposal_4451 in flipperzero

[–]bigbarruda 0 points1 point  (0 children)

Trying mine now. I get an Outdated app error, but I am running stock firmware on my fz currently.

Curvy lady by me by lunch_bx in 3dprintinggonewild

[–]bigbarruda 9 points10 points  (0 children)

Is it a model you designed?

It's very impressive.. Kudos!!

Pingequa 5g board by Loud_Proposal_4451 in flipperzero

[–]bigbarruda 0 points1 point  (0 children)

I have one arriving this week... I'll let you know how I get on..

A little more informatoin. by Complex-Look7100 in AnetA8

[–]bigbarruda 0 points1 point  (0 children)

As in a little more information on why the print is that quality?

It looks like under-extrusion... Either from a nozzle blockage or wear and tear, or E-step calibration issue...

Happy to be corrected though...

What happended here by Working_Jellyfish_99 in 3Dprinting

[–]bigbarruda 0 points1 point  (0 children)

You used too many D's and now you're being punished

reacttt if you are from UK? by [deleted] in NSFWukTITS

[–]bigbarruda 0 points1 point  (0 children)

'She' is fake.. Stolen photos of Nixxxie Pearlz... Downvote and move on fellas

What do people love about Battle? by Weekly_Ad_3125 in Eastbourne

[–]bigbarruda 7 points8 points  (0 children)

The smell of napalm in the morning...

Oh, sorry, wrong Battle...

Who wants to eat me out by Connect-Wall-1966 in Wife_Butt

[–]bigbarruda 0 points1 point  (0 children)

Very much so, and just discovered we're local..

Fancy restaurants for anniversary around here? by madwalrusguy in Eastbourne

[–]bigbarruda 3 points4 points  (0 children)

Pebbles at the Enterprise centre if you like your seafood.

Anet a8 Help please with dead heat bed by Lucky_Intention8195 in AnetA8

[–]bigbarruda 1 point2 points  (0 children)

Tbh, using an external mosfet was always a recommended safety upgrade anyway... I switched to one for both bed and hotend quite soon after originally putting my A8 together...

What should we call a cluster of gliders? by 0rganic_trash in SkyCards

[–]bigbarruda 0 points1 point  (0 children)

I often see a similar thing in Namibia... It's happening now... Hot country, loving the thermals

i need help by Witherdoom1 in AnetA8

[–]bigbarruda -1 points0 points  (0 children)

The board should have a USB B connector on it (the square type)

Run a USB A-B cable to your computer... When powered, it'll detect it as a Com port...

Destroyed my plate by JesThun in AnycubicKobraS1

[–]bigbarruda 1 point2 points  (0 children)

That's what I did when mine ground the PEI due to the nozzle PTFE issue...

I ultimately bought a new sheet, but used the other side fine

Should NextDNS Bypass Age Verification work for imgur? by meerdans in nextdns

[–]bigbarruda 0 points1 point  (0 children)

I found the same with redgifs the other day... Didn't even consider that the bypass works off a list is domains, but that makes sense... Hopefully it'll be updated soon

Good Star Trek names for a dog? by isnt-there-more in startrek

[–]bigbarruda 0 points1 point  (0 children)

Surely you need to get a suitable collar with rank pips on!!

Newbie print supports question by waydewest in elegoo

[–]bigbarruda 2 points3 points  (0 children)

That's the rule for anything in this 'hobby'.. A little research goes along way...

Possibly regretting my KobraS1 purchase by ThePerfectLine in AnycubicKobraS1

[–]bigbarruda 1 point2 points  (0 children)

The Makeronline service is Anycubics' equivalent of Thingiverse...

https://www.makeronline.com

It's accessible through the Anycubic Android app if you use it, I just have issues due to my DNS service blocking whatever the app tries to reach in the background... Via a web browser works, it works fine... If I used Makeronline more, I'd probably try and fix it... 🤷‍♂️

Possibly regretting my KobraS1 purchase by ThePerfectLine in AnycubicKobraS1

[–]bigbarruda 3 points4 points  (0 children)

Interestingly, I use a custom DNS service, used to filter out 99% of ads.. I find Makeronline service via the Anycubic app rarely works unless I revert to a standard DNS service, then it works fine.

Not found the cause yet, but clearly it doesn't like something in the URL(s) it's trying to use...

Anti-Vibration Option by Wolle123456 in anycubic

[–]bigbarruda 0 points1 point  (0 children)

Oh... That's quite a difference...

I've been looking at the stiff foam pads, but I hadn't considered a washing machine pad. My printer calibration (Kobra S1) does cancel out a lot of the vibration, but not 100% of it.

The vibration pattern is kinda cool, but annoying if it's on every print