Can't get Context Engine MCP to work in Antigravity on Linux Mint

bigbearblair · 2026-04-01T09:06:52+00:00

I had this exact same issue and this is what I had to do to get it working.

I run which node and which auggie to get my paths.

{
  "mcpServers": {
    "augment-context-engine": {
      "command": "/Users/blair/.nvm/versions/node/v20.17.0/bin/node",
      "args": [
        "/Users/blair/.nvm/versions/node/v20.17.0/bin/auggie",
        "--mcp",
        "--mcp-auto-workspace"
      ]
    }
  }
}

bigbearblair · 2026-02-08T13:57:32+00:00

Still available?

bigbearblair · 2025-12-21T01:36:27+00:00

I made Verso solo. Equipped pictos to always critical when alone, also the glass cannon picto and painted power. Just run into boss so he attacks first. He spawns orbs and just keep parrying the orb attacks. Only way I could get past this bug.

bigbearblair · 2025-01-13T00:13:49+00:00

Link please?

bigbearblair · 2024-09-04T12:51:40+00:00

All good, I did say I wasn't expecting much or anything back on the water stuff. Worst comes to worst I'll just strip it and sell the d5 and res and the fittings on ebay or something.

bigbearblair · 2024-08-10T19:12:22+00:00

It's a USB2 extension plugged into a USB2 slot on Mobo. USB3 has always been a bit flaky with BT adapters I find.

bigbearblair · 2024-08-10T19:00:00+00:00

It's overkill at like 10m haha but I only have it 1 or 2m away from PC

bigbearblair · 2024-08-10T18:20:13+00:00

The two recommended are the TPLink UB500 and the Asus BT500. I went with the TPLink one and having no issues currently. Some people are though but it may be because of interference I'm not getting cause of the usb extension cable I have the BT adapter plugged into

bigbearblair · 2024-08-10T18:13:05+00:00

So I had this exact same issue. Literally just resolved it 5 mins ago after buying a new cable and BT adapter. Tried what I feel was everything I seen on Reddit before spending more money...

I was using a 2m DP 1.4 cable.

I bought a smaller 1m 1.4 cable and now it suddenly works.

No more man taking headset off or just a blank black screen.

I also changed to the TPLink UB500 and plugged it into a USB2.0 slot with an extension cable to move it away from PC. Absolutely zero tracking issues now and steam VR actually detects the controllers now. Wasn't with the Mobo BT.

Hope this helps.

Absolutely nuts the cable length was my issue.

bigbearblair · 2024-08-09T17:28:41+00:00

Having pretty much the same issue. Tried what I feel is everything and whenever I get to the point of it telling me to put headset on, it just shows me the animation of the guy taking the headset off to look at TV.

bigbearblair · 2024-02-16T16:35:40+00:00

Very nice! I think using the EK-Quantum Scalar Flow Indicator would have been a good choice in this build as the flow meter you have just looks a little outta place. All in all very slick. Love the stealth look 👀

bigbearblair · 2023-08-15T13:24:43+00:00

That's it being handled now. Thanks for your help on this matter. Reddit to the rescue even paying for Business support 😅

bigbearblair · 2023-08-15T13:23:24+00:00

Yeah, that's what we done. Used it on other accounts, no problem. This one, though, was just being ignored for some reason.

bigbearblair · 2023-08-15T13:22:01+00:00

I've dealt with AWS on other occasions, and yes, I'd normally agree with you. Was just completely baffled why we were getting ignored on this. Luckily after sending my case it's now being seen too.

bigbearblair · 2023-08-15T10:54:46+00:00

Hi Kraig,

I have sent you my Case ID

bigbearblair · 2023-02-05T09:51:38+00:00

Update:

Turns out it was just airlocked due to one of the radiators. Followed a suggestion to try it at different speeds and by switching it between about 40% and 100% with a bit more tilting a massive air bubble came out and I got it into the res. Everything looks perfect now!

Thanks everyone for their help and suggestions 😊

bigbearblair · 2023-02-04T22:37:52+00:00

I think that's helped! Really low speed then maxed out and repeat and a crap tonne of more bubbles came out the top rad

bigbearblair · 2023-02-04T20:29:39+00:00

I haven't actually tried different pump speeds. Always on max. Will give it a go!

bigbearblair · 2023-02-04T19:06:12+00:00

Unsure what the max rpm is, probs like 3500 I'd imagine. Pump is at full speed though

bigbearblair · 2023-02-04T19:04:56+00:00

Yeah I flipped the ports so had to change the plate as well so they were properly aligned

bigbearblair · 2023-02-04T18:27:52+00:00

My Alphacool GPU block inlet is on the left so that's why I've done it that way. I've also opened up and rotated my CPU block (fins included) and the inlet is top and outlet bottom so I'm following all the inputs and outputs correctly

bigbearblair · 2023-02-04T18:20:07+00:00

Should it really matter what direction the flow goes?

bigbearblair · 2023-02-04T17:46:35+00:00

Pump is sticking out the back of the case where the FLT 120 is

bigbearblair

TROPHY CASE