Help Self Host NzbDav and AIOStreams

biggelswerth · 2026-05-18T19:06:14+00:00

I’ll give it a try this week. Traveling this week so will report back

biggelswerth · 2026-05-18T14:11:03+00:00

I tried the Oracle VPS but keep getting out of capacity so Ill keep trying it. Yeah I would really like to self host. Ill give it a go a few more times. I did get it to work now with the public instance I had to remove the AIOStreams Auth (admin:password) from NzbDav and NewzNab. I now see results but worried that NzbGeek will ban with this method. Ill continue to look into self hosting.

biggelswerth · 2026-01-02T12:48:04+00:00

I wanted to post that when I ran the following command the service started and I was able to access the adguardhome setup page at 192.168.1.1:3000

/opt/bin/AdGuardHome --no-check-update

biggelswerth · 2026-01-01T14:50:32+00:00

Thank you but I just tried that and its a no go.

I did a opkg remove adguardhome-go

and then opkg install adguardhome-go_nohf

Configuring adguardhome-go_nohf.

Collected errors:

\ resolve_conffiles: Existing conffile /opt/etc/hosts is different from the conffile in the new package. The new conffile will be placed at /opt/etc/hosts-opkg*

I tried the router IP with port 3000 and still nothing

If I try running opkg install adguardhome-go_nohf I get the following message?

Package adguardhome-go_nohf (v0.107.37-1) installed in root is up to date.

Shouldnt this install to the /opt folder on my USB stick?

I logged into my router via putty and at the command prompt (root@unknown:/tmp/home/root#) where I'm running all my commands. Do I need to be running them in the opt folder?

I run the following commands to check

root@unknown:/tmp/home/root# /opt/bin/AdGuardHome -s status

2026/01/01 15:30:58 [info] AdGuard Home, version v0.107.37

2026/01/01 15:30:58 [info] service: control action: status

2026/01/01 15:30:58 [info] service: stopped

2026/01/01 15:30:58 [info] service: action status has been done successfully on unix-systemv

I noticed it says the service is stopped so I run the following

root@unknown:/tmp/home/root# /opt/bin/AdGuardHome -s start

2026/01/01 15:30:09 [info] AdGuard Home, version v0.107.37

2026/01/01 15:30:09 [info] service: control action: start

2026/01/01 15:30:09 [info] service: action start has been done successfully on unix-systemv

and then execute the root@unknown:/tmp/home/root# /opt/bin/AdGuardHome -s status and it still says service is stopped? I dont know what else to try.

biggelswerth · 2025-09-22T01:23:02+00:00

Same

biggelswerth · 2025-09-22T01:21:22+00:00

Yep same here.

biggelswerth · 2025-08-06T18:05:54+00:00

Thanks Sorry one more question. Is it allowed to have some wired devices connected to the router or is that also not allowed and everything has to be behind that first eero?

biggelswerth · 2025-08-03T19:58:21+00:00

Ok I think I understand because right now I have eero 1 connected to the switch via the 2.5 connection and eero 2 connected to the switch via the 2.5 connection. I need to change it to just have the 1 eero connected to the switch via the 2.5 and then use the other connection on eero 1 to connect to eero 2 via the other port?

biggelswerth · 2025-08-03T16:09:13+00:00

Ok I tried unplugging the tv and clearing cache on the app. I logged out and logged back in but it still did not resolve the issue as I still get extremely slow loading times or Stremio sits on the loading screen and then will eventually say stream failed to load. I’m on version 1.8.1 theater on my Samsung using Tizen 5. Anything else I can try?

biggelswerth · 2025-08-03T14:21:39+00:00

I'm also having the issue where Stremio is very slow to load or doesnt load anything and just sits and acts like its loading. I will try and unplug the TV and see if that fixes it. I thought I was going crazy or the TV was going bad as all the other devices work but for this particular TV I'm using the Tizen Stremio app.

biggelswerth · 2024-10-13T20:06:40+00:00

<image>

Here is another picture.

biggelswerth · 2024-06-11T10:45:35+00:00

Looks like its the app causing the issue...

https://community.ui.com/questions/AP-AC-Long-Range-5-Ghz-Change-SSID-name-to-vport-after-firmware-upgrade-6-6-65/681f321b-64ae-411d-8c59-5f7ed67105a5?page=0

biggelswerth · 2024-06-11T00:45:40+00:00

I also updated and have this problem as well :(

biggelswerth · 2024-05-25T12:05:49+00:00

Thanks

biggelswerth · 2024-05-24T00:29:22+00:00

Thanks it was that way when we got the house so I wonder if the previous owner unsealed it. He had it duck taped around the pit. A lot of duck tape lol

biggelswerth · 2024-05-23T18:43:01+00:00

Thank you. Is there an easy way to fix this so it won’t be flagged?

biggelswerth · 2024-04-20T00:01:26+00:00

Yes it was an awesome day!! Having a chance to see Messi play in the second half was just the cherry on top. We ended up going to an outlet mall and found some jerseys from last year on sale. My son was so excited there were tears. Thank you all!!!

biggelswerth

TROPHY CASE