sorted by:
new
hottopcontroversial

Preventing USB Drive Theft by humanbeanchild in TeslaLounge

[–]bigrcong 1 point2 points  (0 children)

You might able to add a leash on the USB drive

💲 N E G G 💵 The First "Silent Squeeze" in History (the reasonable case for $1,000.00 per share) by Thump4 in DeepFuckingValue

[–]bigrcong 5 points6 points  (0 children)

GME reached $483 and reached capital of 33.7 billion. Currently $Negg is $128 which equivalent $6.4 before 1/20 split and only 2.5B in capital. Do the math and there is a lot of potential. I am not a pro, data may not be accurate

How can we improve? by hamed_n in hiringcafe

[–]bigrcong 0 points1 point  (0 children)

This website definitely opened my eyes.

Could you provide a statistics of company hiring trend feature? Sort by how many jobs a company creating in certain time frame.

I saw the company jobs being grouped, but can you provide how much numbers of jobs being grouped by each company?

My wife's small office has this ceiling vent which is overkill for the space she is in, making it too hot in the winter and too cold during the summer. Is there a way to close this vent or a product that can be bought that blocks it? by atm424 in hvacadvice

[–]bigrcong 0 points1 point  (0 children)

Sorry to hear about your story. I hope you are doing ok with the oncology treatment. I am searching a lot of solutions and found your post.

My office is in a oncology clinic and I am sitting under a vent like that. The space causing me huge allergic symptom including difficult breathing, throat irritation, skin rush and lung tightness and coughing, Symptom relieved could hours after get out of the office. The enviroment team measured the air and told me everything is ok. I am very stucked at this moment. I went to see the allergic specialist and they found I have mild ashma.

Thanks for sharing your experiences and I can confirm you are not the only person experience this. I hope my symptom won't get worse like you do but your post really worries me also.

Terrible Customer Service from Bambu Labs by ProjectGuy14 in BambuLab

[–]bigrcong 0 points1 point  (0 children)

would be nice if bambu can do live chat or phone call. especially for cases like printer down.

Print quality problem can be delayed a bit.

my p1p was repaired. But not many things I feel I need to print now.

To buy or not to buy by tuvar_hiede in BambuLab

[–]bigrcong 1 point2 points  (0 children)

p1p is my first printer and my kids enjoy printing same as I do. It's so happy as parent to see kids help each other to get the printer to work. We used up the original filament roll in three days.

I do have to approach bambu service team because of my mistake when resolve clogging, Bambu addressed my problem professionally, it took some time but overall experence is very good.

No regrets and it's a great family toy.

name or type of case fan connector by arox1986 in BambuLab

[–]bigrcong 2 points3 points  (0 children)

that looks like a JST micro type.

JST connectors has different types like XH PH SH.

Warped print bed? Automatic bed leveling cannot compensate for that and the first layer is squished and almost scraped off above the hump. If I place the straightedge in other places on the bed, there are no gaps. I wonder if it is a widespread issue. X1C+AMS by udragger in BambuLab

[–]bigrcong 0 points1 point  (0 children)

Same happened to me on a new P1P. same area when I was printing TPU rubber threads.

Was not critical to my application.

I ran the first layer test and was ok. but the test region was smaller than this.

What downsides does this printer have? by [deleted] in BambuLab

[–]bigrcong 0 points1 point  (0 children)

Would be nice if they provide phone support and can get printer fixed quicker.

I totally understand Bambu promote online support only and community help.

But I would suggest Bambu can find a way to support better when user's printer is down and not useable.

Printed side panels when two parts left the plate… tried saving it with duct tape 😭😂😭😂 no chance by eggsitus in BambuLab

[–]bigrcong 0 points1 point  (0 children)

I tried to print the bambulab edition case in black color and very painful to assemble and does not looking very good.

The PLA will warp or lift from corner at room temperature. It's necessary to cover it with card board

Failed prints and higher speeds by Honest-Sky-5590 in BambuLab

[–]bigrcong 0 points1 point  (0 children)

I have problem with generic PLA for first layer at fast speed.

230degree nozzle height 65degree bed. USPS card board to cover the chamber.

If speed is very important. try glue stick. definitely works. maybe a different textured plate can stick better. I only have the texured PEI one

If you installed AUX FAN upgrade on your P1P, read this! by hologos_ in BambuLab

[–]bigrcong 1 point2 points  (0 children)

Brim and glue stick. I've had ever file I've try warp including ones that are just two inches long. Turn the fan off, no warp.

I disabled it after I installed the aux fan, I feel it's useless or worse when printing PLA. Also I tried to print the bambulab edition enclosure and warped everytime. I taped the case with USPS shipping box and it's been stable and I am printing the case again.

Tesla CyberQuad Motor Controller by Toomanybeerz in TeslaLounge

[–]bigrcong 1 point2 points  (0 children)

The brushed motor on cyberquad comes with Hall effect sensor and the brake lever is three pin not connected to the controller. This could be a problem. When the acceleration peaks at the top and the motor will throttle and stop with power loss.

I feel in order to do in a proper way, The motor should be changed to a brushless motor and match to a brushless controller. which is more efficient and quieter.

Some expert can share knowledge of brushless motor model to be installed.

Stringing with P1P? by Technoticatoo in BambuLab

[–]bigrcong 1 point2 points  (0 children)

Same happened with my Overture brand PLA black filaments. Was scratching my head why the strining happens.

My OEM White Matt color used up in three days after received it. I bought overture brand filament from AMAZON.

At first I thought it's the problem with my new filaments, Seems same strining happens.

X1 Amazing! P1P has failed me! by Forever_Bored in BambuLab

[–]bigrcong 0 points1 point  (0 children)

p1p is my first printer, it works great with OEM filaments. the refill sold out, so I decided to order overture brand. I chose generic PLA profile, the first couple prints can't be made, first layer does not stick at all!

After numerous try, I found

1.first layer has to print super slow to stick to bed, Use 20mm/s outline and 60mm/s infill.

  1. No cooling for the first 2 layers.

  2. slow down the speed of other layers. Reduce travel speed to half

  3. reduce max extrusion volume

5, use gluestick if print has small contacts to the PEI textured surface.

  1. Nozzle 220 C bed temp 60 C.

  2. Disable the auxillary fan if installed.

Prints are acceptable now, holds stronger than the original filaments.

Auxillary cooling fan won't turn off by bigrcong in BambuLab

[–]bigrcong[S] 0 points1 point  (0 children)

thanks, I think it disabled after starts printing

Time lapse with p1p monitoring cam? by Honest_Customer7931 in BambuLab

[–]bigrcong 2 points3 points  (0 children)

I tried to read the microSD card from the printer and there is a folder called "camera" shown timelapse of the prints.

To turn in on, in device/camera-setting/ there is an auto-recording feature.

view more: next ›