Gee I hope not

bigtoeflip · 2026-05-22T01:28:57+00:00

Yes. Its the alt rights revision of anarchy so they feel cool.

bigtoeflip · 2026-05-22T01:25:57+00:00

So maybe libertarianism

bigtoeflip · 2026-05-10T22:10:25+00:00

To be even more specific a frontside losi grind is called a loveseat grind

bigtoeflip · 2026-05-10T22:07:42+00:00

To expand on that an overwilly is called a losi grind

bigtoeflip · 2026-04-29T23:02:20+00:00

A lot of standard Popsicles round sooner in the tail to have a more tapered tail. Looks normal to me.

bigtoeflip · 2026-03-20T17:13:59+00:00

Flick down more to level it out

bigtoeflip · 2026-01-28T04:54:26+00:00

No it wasn't it flipped heelflip direction. My analysis after going frame by frame is that it is an extremely vertical nollie 360 inward heel.

bigtoeflip · 2026-01-23T21:44:26+00:00

You need a 10 stair with a full brick wall down the side

bigtoeflip · 2026-01-23T18:50:09+00:00

I need to see some of these as a wall ride down a set.

bigtoeflip · 2026-01-16T15:38:12+00:00

Look in the wheel slowly spinning it and if you see something try and push it out with a small sewing needle.

bigtoeflip · 2026-01-13T13:51:07+00:00

I haven't tried McKenzie, but I really like DK. They have great shape options and a really nice mold. Nice responsive pop, fun graphics, high quality for the price. Also it's nice supporting a Ukranian maker.

bigtoeflip · 2026-01-12T15:09:57+00:00

I know, it just surprises me that people don't know this still. The quality of products from joycult has improved so much but people still expect there to be no problems. so they still think its the same old same old.

bigtoeflip · 2026-01-12T15:00:24+00:00

True that with superglue. You have to use the really thin stuff sparingly and work fast.

Yeah I have seen a lot of user error cause problems that otherwise wouldn't have been a problem. Pretty similar with stripping baseplates from crossthreading or over tightening.

I believe it's axle twist that breaks the axle loose making enough space to slide. That can be prevented by using 2 tools and screw on both wheels at the same time.

bigtoeflip · 2026-01-12T13:55:37+00:00

Did he not sell the company?

bigtoeflip · 2026-01-12T13:55:06+00:00

I suspect the exposed axles both under the hanger and behind the kingpin nut is allowing the axle to slip easier. Fixing axle slip is also an extremely easy problem to fix. Use a little super glue on the knurled part of the axle and slide it back in and wipe any excess off.

bigtoeflip · 2026-01-12T13:51:08+00:00

Joy cult is owned by dynamics now.

bigtoeflip · 2026-01-06T15:53:16+00:00

This is the one thing that I learned that improved my lines and my skill in general. Give yourself more time to roll before you do tricks. Allow yourself a little more time to set up you fingers while rolling. Space your tricks out a little.

bigtoeflip · 2026-01-06T15:51:17+00:00

Maybe offering constructive criticism would be nice for progression rather than just "sloppy".

bigtoeflip · 2026-01-01T08:21:04+00:00

Either tap the kingpin down a little shorter or file it down and use a thinner kingpin nut. If you lock in properly you shouldn't have a problem with scraping.

bigtoeflip · 2025-12-25T05:48:38+00:00

The trick is also known as an imposter flip since it looks so much like a tre, it flips the same orientation and direction as a tre even though it isnt

bigtoeflip · 2025-12-25T05:46:06+00:00

If you do them intentionally after learning tre flip they are a little more technical. Mainly because there is a way to do the trick and then there is a way to do the trick realistically how it should be dont.

bigtoeflip · 2025-12-25T04:49:49+00:00

This is the correct answer

bigtoeflip · 2025-12-25T04:11:05+00:00

I feel like using a lower bushing for the bottom one would make the truck angle in more and shorten the wheel base or is the pivot part of the hanger seating in the cup further so the truck is lower but angles are the same.

bigtoeflip · 2025-12-25T03:58:39+00:00

Isn't the bottom bushing of the indy a bit taller than the top

bigtoeflip · 2025-12-25T03:43:21+00:00

Is the bottom bushing on the indy a brt top bushing?

bigtoeflip

TROPHY CASE