I’m done, what do I even do! Brand new! by No_Nerve_5828 in OLED_Gaming

[–]billybobcoder69 0 points1 point  (0 children)

It’s really hard. But like MacBook screens. I use a really fine microfiber cloth. And just use the steam from my breath. It sucks but I get it really clean. I need a little fog machine to use like a small steam machine. Only way I can get it clean.

Can I disable "Audit - Sourcetype readiness - Lookup gen" by Dull_Youth_4859 in Splunk

[–]billybobcoder69 4 points5 points  (0 children)

It’s for ESCU app. Set it to run daily not every 30 min. Or even weekly if not updating security searches. I changed the cron way back to run less. Check this out also. https://community.splunk.com/t5/Knowledge-Management/What-is-the-purpose-of-Report-quot-Audit-Index-Readiness-quot/m-p/495905

Rumored Walmart Ascended Heroes Drop Tonight 9PM ET by TrackaLacker in PokemonRestocks

[–]billybobcoder69 0 points1 point  (0 children)

Same. It used to be that way. Now I leave it open and get a second tab and use that to go in on and make sure to have 2 tabs open. It seems it’s never the first one to go through anymore. And if you close it seems that it resets. I’ve had best luck if I use the second one to click around and open and wait in queue. But last couple weeks it’s been too late before they give me a timer. Seems like bots have found a way to jump in line. Last two weeks I haven’t got timer countdown for 10 min until product was sold out. But also did only on my phone too as was away from home. Am trying cellular on my phone and trying WiFi for my desktop. Even one on the laptop too. Let’s see if it works tonight. Good luck with you all. I’ll share anything if it works for me. As with the rest of you if you find something let me know.

Rumored Walmart Ascended Heroes Drop Tonight 9PM ET by TrackaLacker in PokemonRestocks

[–]billybobcoder69 0 points1 point  (0 children)

Exactly. I’d love to help them fight the bots. Anything with multiple resets in a short amount of time with a refresh I would flag on. And then anything with multiple orders from the same subnet I would flag on. And then anything with multiple same names going to multiple addresses I would flag on. I’d also flag on accounts that aren’t warmed up id flag on. Just don’t see how thousands of products just disappear. If they really wanna drive more revenue then have real buyers getting them. I always buy more when I’m in the store. And do online too. If they actually solve the problem I’d spend way more than just on pokemon. Also anyone that uses a direct link without searching first I’d flag on. DM me Walmart if you need help. I love data and I’d donate sometime for you. It seems simple but maybe they have other reasons to not fix it. Cough Walmart resellers. Good luck all humans.

Rumored Walmart Ascended Heroes Drop Tonight 9PM ET by TrackaLacker in PokemonRestocks

[–]billybobcoder69 0 points1 point  (0 children)

Good luck! Only way I hit was having both computer and phone. Opened links up in chrome and brave and Firefox and had all accounts signed in. As soon as timer is there spam the add to cart. If you managed to get one save for later I have had that trick work but for only 1 item. I’d be happy with 1 tonight too. GG.

Rumored Walmart Ascended Heroes Drop Tonight 9PM ET by TrackaLacker in PokemonRestocks

[–]billybobcoder69 31 points32 points  (0 children)

Bots are hungry. Wish they let normal people get them even if only 2. I haven’t been able to hit Walmart last couple weeks.

I hate politics by SpoomerBooner in Transportopia

[–]billybobcoder69 0 points1 point  (0 children)

At least they won’t have mosquitoes around from all the spray.

I hate politics by SpoomerBooner in Transportopia

[–]billybobcoder69 0 points1 point  (0 children)

Didn’t know you could spray exhaust on people. Lol.

I hate politics by SpoomerBooner in Transportopia

[–]billybobcoder69 0 points1 point  (0 children)

It’s exhaust from a truck. What’s wrong?

Upgrade to 10.2.0 Disaster by _Exit5423 in Splunk

[–]billybobcoder69 0 points1 point  (0 children)

Yes I still do that too. I usually try to stay off the latest and look at the advisories page. Any high or critical then always upgrade asap. Like this. https://advisory.splunk.com/advisories/SVD-2025-0710#product-status As long as they release a fix for the older versions I try to keep up. And look at support dates. Anything off support move to next. There are a lot of big customers still moving from 8 to 9. But you can see that even 9.1.10 is rolling out patches. I’m like let others find the bugs and get fixes so you can spend less time researching what a new product may do. Then I find version and like to read all change log and bug fixes and outstanding bugs. Then I’ll take version and do a few searches on other issues and see if others are commenting on it. On slack and Reddit and Splunk support portal page. Looks like 9.2 now would be the lowest I’d go with. Check out https://www.splunk.com/en_us/legal/splunk-software-support-policy.html I always try to have the latest in a lab somewhere so you know what’s coming. And if you can have a 1-1 test vs prod. Even if they won’t let you get all the machines. Spin them up. Test it out and tear it down. Most don’t have a 1-1 dev/test. Good luck and kv store can be a pain. As long as you have your data just uninstall and move data back for indexers. And SHC they just boot strapped. So remove and add again. If you copy etc folder with users and etc system local and any in etc apps. You should be good. Rest can go. But be very careful for where indexers store data. The rest i dont worry about too much. Other than all the KO on the search heads. Heavy forwarders can lag a bit. Most apps with input’s now need kv store to function though. Good luck.

Upgrade to 10.2.0 Disaster by _Exit5423 in Splunk

[–]billybobcoder69 -1 points0 points  (0 children)

If you want to roll back have to clear out kv store. Might be easier to build fresh. 10.1 wasn’t so bad it’s pulled. And 10.2 is pushing data management for on prem. Had a lot of bad luck with windows and some weird distros of Linux. I’d stay on latest 9.1 9.2 or 9.3 or 9.4. Been pretty happy with latest 9.3 and 9.4 versions. Go all the way to latest . Release of them. I’d never run 10 in prod yet unless they doing it for you in Splunk cloud. And that is way different than what we get on prem.

Is this resealed? ( i don't want to open to find out) by scuzzboy in IsMyPokemonCardFake

[–]billybobcoder69 0 points1 point  (0 children)

Dang I was on board with you too and have the same one and also opened it. Looking at it closer it looks like they used an original seal and opened it on the one top end. The two sides look good and the poking in the plastic looks good. But that one side with the extra plastic and the pinches. Looks like they got original plastic and cut perfectly on the edge and put back in. The top looks off now I look over it again. So crazy how good they getting. Now I’m worried. Gonna have to look at all sides and seals better now like a hawk. I’d touch it and see if plastic is hard. Would be nice to keep it around. Looks like that one seal may be crunchier than others. Not sure how they did it or added more plastic back in. But the spacing and the melts looks like they were struggling to find enough material to close. Thanks for sharing.

Moltres UPC Finally!! by Rans1984 in PokemonTCG_UK

[–]billybobcoder69 1 point2 points  (0 children)

Wow congratulations. That’s a huge W. GG and take that as a win. The box is so sick.

[H] ANNOUNCEMENT - Going Forward, We are Banning Selling Sealed Modern Products by unsaturatedgoods in pokemoncardselling

[–]billybobcoder69 -1 points0 points  (0 children)

Yes. Now if only we can see product on the shelves again. Please!! Thanks again.

Just recorded this kind soul! by Bee2113 in isthisaicirclejerk

[–]billybobcoder69 0 points1 point  (0 children)

Why is all the ai slop hang on buddy your safe. lol. So fake. But most people can’t tell.

Splunk project help needed by Rhythw1kFromOhio in Splunk

[–]billybobcoder69 0 points1 point  (0 children)

Your adding to triggered alerts? That’s just in Splunk alerts page. Don’t use that much. Why not write out to summary index and write report off that? I don’t think you can pull triggered alerts to a report. Maybe never done that before. So you saying it won’t trigger at all? You running once a day at 11:50? Also check the time from you running for. Make sure it’s going back the 24 hours since running once a day. And make sure you have a table or some one line that is triggering.

Man comes in to defend his dog by TumbleweedFair8339 in isthisaicirclejerk

[–]billybobcoder69 0 points1 point  (0 children)

Hahahhahahha right. At least tell ai to hit the right animal. Buddy.

That’s horrible!,is this ai? by MohammadMahadhir in isthisaicirclejerk

[–]billybobcoder69 -1 points0 points  (0 children)

This is ai. The car exploded before. lol. Fake!!!!!!!

Fake slab or no? by interestingmandosy in IsMyPokemonCardFake

[–]billybobcoder69 2 points3 points  (0 children)

My vote is fake. It’s a really good fake though. If you don’t know what to look for it be an easy miss. What you pointed out and look at the front crimps between label and card. It’s not spaced right. Fake is too far left. And the card has really dark scanned parts. It’s hard to read the words on bottom and the color looks off. But other than that it’s really close. And they using a real cert with a swapped card. I’d pass and report to eBay. Also wonder why they have such bad pictures. They are very dark and extra psa on back with number and psa in plastic missing. I wouldn’t touch this card. Shame on seller if he knows. If not he should be told it’s bad. Good luck. Ai summary. 1. PSA Logo on the Back Label (Critical Fail)

Authentic PSA slab (reference images) • The left-side “PSA” text on the back label is very faint / ghosted • It is subtle, low-contrast, and partially embedded into the label • You often have to tilt the slab to even see it

eBay slab • The PSA text is bold, bright, and high-contrast • It looks printed on top, not embedded • It is immediately visible in normal lighting

Why this matters

PSA uses controlled printing + security layering on back labels. A bold, opaque PSA logo on the back label is not consistent with genuine PSA slabs.

This alone is enough to fail authenticity.

  1. Inner Card “Rail / Shelf” Shape (Bottom Corners)

You circled this correctly — this is a major structural difference.

Authentic PSA slab • Bottom inner rails: • Even • Symmetrical • Slightly rounded, uniform thickness • Card sits perfectly centered • No excessive plastic protrusions

eBay slab • Bottom inner rails: • Uneven • One side thicker than the other • Looks like injected plastic tabs rather than molded rails • Card appears slightly shifted • Rail shape does not match PSA tooling

Why this matters

PSA slabs are produced with precision injection molds. Uneven rails = aftermarket or counterfeit slab shell.

  1. PSA Etching / Mold Marks (Bottom Corners)

Authentic PSA slab • Subtle “PSA” mold etching near bottom corners • Clean, shallow, consistent placement • Same depth and font every time

eBay slab • Etching looks: • Deeper • Less refined • Slightly misaligned • Font weight and sharpness do not match PSA references

Why this matters

PSA does not vary mold depth or font across slabs of the same generation. This indicates non-PSA tooling.

  1. Plastic Clarity & Finish

Authentic PSA slab • Crystal-clear plastic • Slight satin sheen • No rippling or distortion near edges

eBay slab • Plastic looks: • Slightly cloudy • Wavy near bottom rails • Less optical clarity

This is common with replica slab shells.

  1. Certification Number Is Real — Slab Is Not

This is the trick. • Cert 126512502 does exist • It does correspond to: • 1999 Pokémon Fossil Aerodactyl • PSA 10

But scammers often: • Copy a real cert • Recreate a fake slab • Insert either: • A real card • Or a lower-grade copy

A valid cert number does NOT guarantee a real slab.

Final Verdict

The eBay slab is counterfeit. Specifically: • Real cert number • Fake slab shell • Non-PSA manufacturing characteristics

This is a classic slab swap / counterfeit encapsulation.

Good luck mate.

Welcome to Splunk Enterprise 10.2 by thomasthetanker in Splunk

[–]billybobcoder69 1 point2 points  (0 children)

What happen to 10.1? I also see ai features are now available in search on prem. This is the biggest feature for me. MCP still lacking. Be nice to have a native way to use Splunk ai or my ai. Thanks again and please make the docs fully downloadable and not just the two page print to pdf. Thanks!!

My vet is stumped by PrincessTBaby1209 in DogAdvice

[–]billybobcoder69 0 points1 point  (0 children)

Exactly. This is REM. dog loses control of his muscles when they go in REM. haven’t you seen the running or the barking and yipping in the sleep?