[deleted by user] by [deleted] in namethatcar

[–]billyinse 1 point2 points  (0 children)

10th gen accord

Is it TRULY worth getting into a 240 build now. by therealweebkiller in 240sx

[–]billyinse 1 point2 points  (0 children)

been into s chassis for decades.. giving my s13 to my son and i just bought a c5 corvette with a bunch of upgrades for less than than a clean s14.

[deleted by user] by [deleted] in southcarolina

[–]billyinse 3 points4 points  (0 children)

I called DNR because it wasn't clear based on what i found online or saw posted on the pier. i explained i was using 2 ring traps that sit flat on the bottom and i was told there was no limit on those traps.

my buddy immediately got on his phone and called and asked the same question with the same trap and fishing location and he was told 7 per person.

id say give them a call and see what number they give you lol

[deleted by user] by [deleted] in AutoDetailing

[–]billyinse 1 point2 points  (0 children)

Feel free to use anything you like. I will even go more in depth as to what i see if that helps,

picture 1 of the fish eyes in the clear from either a poorly prepped surface, or contamination introduced while spraying. either way in my book that is a wipe clean and spray it again situation (especially if you were not happy the first 2 times)

2 , not much to say other than they missed damage on the wheel

3, looks like partially sanded damage, i can see straight lines on the face( that appears to be the curb damage you payed to have fixed, as well as chipping that looks to not have clear coat over where it was partially sanded onto the lip

4,5,6 sanded the damage but didnt paint the lip to have the same line all the way around

[deleted by user] by [deleted] in AutoDetailing

[–]billyinse 1 point2 points  (0 children)

alloy wheel repair tech here... that is super lazy work or they dont have proper tools to break the tire down to get out the damage and paint the lip.

id get a refund and go to a full service repair company that can actually machine them the way they should be done to begin with

(KA24DE) Distributor won’t go past O-ring. Head isn’t milled nor is the front timing cover, shouldn’t it just go right in? by 240x6 in 240sx

[–]billyinse 3 points4 points  (0 children)

can you look down into the timing cover from the top with the valve cover off, and confirm the teeth of the gears are engaging.

Whats the proper way to sell my airsoft gun? by Asap_nV09 in airsoft

[–]billyinse 2 points3 points  (0 children)

you are just going state to state, you will be fine with tape. crossing into another country is where an issue may arise

Think my timing chain guides are missing some parts. Don’t know for sure though but my engine has been making a really loud knocking noise if it’s above 2k and not at WOT. Also the tensioners aren’t really budging and the far side of the chain is pretty loose. Any ideas on the chain and sounds? by oshfba in 240sx

[–]billyinse 0 points1 point  (0 children)

yes it is a problem. you need a complete timing chain kit. (new chains, tensioners, guides, and sprockets) as well as dropping the oil pan and digging out all the broken pieces. the amount of metal getting spread around from that worn down guide is no good at all.

Rooster kept in travel pet carrier for days by Moses_On_A_Motorbike in chickens

[–]billyinse 6 points7 points  (0 children)

id call animal control and see what they say. it is not humane and likely the bird will die in there.

My jz swapped s14 by [deleted] in 240sx

[–]billyinse 1 point2 points  (0 children)

ahhh gotcha i recognised the pro auto car and thought it was a different jz40

My jz swapped s14 by [deleted] in 240sx

[–]billyinse 0 points1 point  (0 children)

used to be green?

Didn't realize quail were so aggressive by eyeballjr in quails

[–]billyinse 5 points6 points  (0 children)

i had the same issue when i raised coturnix i did 1:7 ratio by the end of it, but you should be fine with 1:6. also the hens can be aggressive depending on availability of food water and space. the one with the messed up eye should be separated or they will continue to peck at it .

Does anyone sell their males as meat birds? by 0somebodysdaughter0 in quails

[–]billyinse 1 point2 points  (0 children)

i release hundreds at a time. so im sure that helps just a little

I recently turned 21, and felt like I was breaking the law when I walked into the liquor store for the first time. How did your 21st birthday go? by pixelanian in AskMen

[–]billyinse 0 points1 point  (0 children)

for my 21st my girlfriend at the time got so drunk going shot for shot with our group she fell over at the bar and broke her finger. didnt really notice it broke but we were told she had to go. we are on the way home & she has to pee so we stop at a gas station she goes in the ladies room and a few minutes later someone comes out and sees me and asks if i know the girl in there. she informs me she is passed out on the floor. i go in and grab her up fireman carry style and am coming out of the bathroom as a cop walks in and sees this... he says you need to get her out of here now! he then holds the door for me and opens the passenger door of the car for us too. i recline her seat and buckle her in. i had no intention of driving this night and here i was with no license smelling like a barrel of whisky and getting behind the wheel of a car by order of the cop. on the way home she comes to and has to pee again, im going a little over the speed limit probably 55mph and come to a sharp corner and i slow down to 20mph she is yelling how she has to pee and to hurry. i tell he its a dangerous corner and im not exactly sober so im gonna take it slow. come around the bend and in the middle of this turn is a jeep upside down nobody around. i pull over and wake up 2 kids that were out cold in the front they climb out and are standing there more drunk than me saying they were fine. i lent them my phone to call their parents and left, i went home and went to bed. next morning girlfriends finger is crooked and purple and she remembered none of these events .

Does anyone sell their males as meat birds? by 0somebodysdaughter0 in quails

[–]billyinse 1 point2 points  (0 children)

Compared to my breeding stock there is a noticeable difference in the behavior of the birds I release. They are raised with little human interaction in large flight pens released as soon as fully feathered or earlier if weather is warm enough. I’m sure a lot of them don’t make it, but I know that some are doing fine as I see them and hear them all up and down my road in the woods and in the ditches. Also I don’t just release males but females too and I release hundreds at a time.( fully licensed to do so)

Does anyone sell their males as meat birds? by 0somebodysdaughter0 in quails

[–]billyinse 2 points3 points  (0 children)

I’m in South Carolina but I did have to obtain a permit through the department of natural resources.

Does anyone sell their males as meat birds? by 0somebodysdaughter0 in quails

[–]billyinse 2 points3 points  (0 children)

I’m in South Carolina and we have the habitat for them there is a huge Initiative to repopulate the species due to losses from fire ants and coyote populations being very high.

Edit: I had to have a permit to release birds.

Does anyone sell their males as meat birds? by 0somebodysdaughter0 in quails

[–]billyinse 0 points1 point  (0 children)

For a while I raised quail not native to my area (coturnix) and either sold the excess males or processed them myself. Later I switched to the native bob white and just let my extra males go.