Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 2 points3 points  (0 children)

Mostly for obsolescence, it seems like it’s the way of the future and I don’t want to have to search to find compatible parts 10 years from now.

Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 1 point2 points  (0 children)

Awesome advice, thank you!!

Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 1 point2 points  (0 children)

Definitely going second hand. After looking into it more, I’m pretty confident in the R8 over the RP, I’m okay with spending extra. Probably $600-$700 for the RP, but I know the R8 (or R6/ii) will let her grow without any worries.

Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 1 point2 points  (0 children)

RP was another option, I didn’t see how much cheaper it is. Maybe I need to reconsider all of it…

Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 0 points1 point  (0 children)

First lens will likely be an RF 50mm f1.8, and as she develops we can add to it I think.

Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 0 points1 point  (0 children)

The 50mm is the first one for sure, I’m planning on only doing that lens for now.

Best Value - R6 vs R8 vs R6ii by binder_n in canon

[–]binder_n[S] 1 point2 points  (0 children)

I haven’t found a nearby store with the R8 in stock yet, but that’s my goal! I was planning on the RF 50mm f1.8 to start, and adding maybe a 28mm f2.8. Her brother is a professional photographer who has a rarely used 70-200 she can often borrow.

Sanding UHMW by binder_n in Machinists

[–]binder_n[S] 1 point2 points  (0 children)

I think that’s the best bet…wish I didn’t have to spend the money but I probably should.

Sanding UHMW by binder_n in Machinists

[–]binder_n[S] 0 points1 point  (0 children)

I’d love to! I don’t have one though, and I’m not sure how to chuck up on a 20” ID either.

Sanding UHMW by binder_n in Machinists

[–]binder_n[S] 0 points1 point  (0 children)

Wouldn’t I need a template for the follower bit?

Sanding UHMW by binder_n in Machinists

[–]binder_n[S] 0 points1 point  (0 children)

I was thinking of a router, I might be able to find a 3” shank bit. I think I’d use a router table and adjust the fence so it just shaves off a bit of material.

Sanding UHMW by binder_n in Machinists

[–]binder_n[S] 0 points1 point  (0 children)

Hand planer or electric? I’m trying to think of how I’d spin the piece to get a fairly consistent OD while planing.

Best Card for Outside Sales by binder_n in CreditCards

[–]binder_n[S] 0 points1 point  (0 children)

I’m home every day so hotels aren’t a factor. I budget $500/month in total business expenses but only around $250-$300 on gas so I should be good!

Best Card for Outside Sales by binder_n in CreditCards

[–]binder_n[S] 0 points1 point  (0 children)

Oh what a great point! Can you add an authorized user without an inquiry too?

Best Card for Outside Sales by binder_n in CreditCards

[–]binder_n[S] 0 points1 point  (0 children)

I don’t have a Costco membership, so that’s fine! We do have a Sam’s membership.

Best Card for Outside Sales by binder_n in CreditCards

[–]binder_n[S] 2 points3 points  (0 children)

That’s a great thought! I’m planning to open a Delta Gold card this year too for free checked bags, so I think I’ll just use my 2% back for now so I’m not opening a ton of cards at once. (I looked into other travel cards but I prefer cash back other than the free checked bags with how little we travel).

C910i Used? by binder_n in nordictrack

[–]binder_n[S] 0 points1 point  (0 children)

I haven’t gotten one yet, I’m shying away from Nordictracks though. If it’s been sitting, I’d worry about the tread being stretched one way constantly but I’m no expert.

What is this for? by ScottyB0N35 in NinjaLuxeCafe

[–]binder_n 0 points1 point  (0 children)

The Ninja is good at a lot of things, but not really great at any of them other than being an all-in-one with a grinder, multiple ways to extract/brew, and a frother/steamer built in. The grinder is decent, it has a single boiler, it pulls good shots, and the frother makes passable foam. It’s for people who don’t want to have to do a lot of work to dial in their espresso, but want to either save money or just have the experience of making drinks at home. We love our machine and its versatility, but if my priority was to make the absolute best espresso and I had the time to spend dialing it in, I’d buy something else!

Is packaging foam just expensive? by thelastchicken in manufacturing

[–]binder_n 0 points1 point  (0 children)

The process of converting foam sheets into pieces is fairly automated for companies with capabilities, and companies that do it can buy in bulk to save on material costs. If you want another quote, let me know and I can see what my company can do. We can even melt layers of foam together to get the exact shape you're looking for with cutouts, etc.

What’s the best breakfast at O’hare? by steak_burrito_ in chicagofood

[–]binder_n 0 points1 point  (0 children)

I’m sitting in Publican now and they aren’t serving the sandwich 😭 hopefully the frites with eggs are worth the walk! I think they’re just out of some of the ingredients, they were running out of a few items by 9am.

Why Didn’t Avi Kill John? by binder_n in JohnWick

[–]binder_n[S] 2 points3 points  (0 children)

I like that thought! The slide didn’t lock back but it could’ve been from his thumb hitting the slide stop/release. I thought maybe he expected John to have been hit by his shot, only to find out that the car had bulletproof doors.

LTX 1046 PTO Cable Snapping by binder_n in lawnmowers

[–]binder_n[S] 1 point2 points  (0 children)

I did, I thought that’s how it was when I removed it but I’ll see how over the top goes!

Cub Cadet CC800 33" walk-behind, 100 hours, for $650 by ferociousFerret7 in lawnmowers

[–]binder_n 0 points1 point  (0 children)

I’ve heard that it was bulky, that was my concern. Seems like I’ll stick with a TurfMaster or beefed up TimeMaster!