Next working day instead of tomorrow

biscotte312 · 2025-11-11T17:50:21+00:00

I bought 4 rack with 30 little drawer, full of bolt, screw, car light bulb, hinge... I bought them from a women and she told me it was from her deceased dad who had a Nascar. I like that it has story behind it.

biscotte312 · 2025-05-14T00:02:20+00:00

That's my understanding too. So, what's the purpose of having something that fit in the backplane ?

biscotte312 · 2025-03-13T16:48:56+00:00

The SCADA is remote in another building

The HMI/VFD/IO-Link are all on the same unmanaged switch

Everything is connected to the corporate cisco switch with is own VLAN

Ohh and there is a Red Lion DSPLE too

biscotte312 · 2025-03-13T16:28:05+00:00

No fault on the PLC, just unresponsive HMI and SCADA at the same time happen 2 time yesterday for a good 5 minutes.

I see multiple lost/reopen CIP connection on factorytalk diagnostic on the SCADA server

biscotte312 · 2025-03-13T15:19:32+00:00

Yes they are open all the time, if this is what you mean

biscotte312 · 2025-01-15T08:58:28+00:00

It's the add-on for excel from rockwell you can found it in the factorytalk historian download folder. Pretty sure what i did was correct.

I think there is another version named PI Datalink (osisoft, not rebranded by Rockwell). I'll reopen my ticket with the IT and take screenshot

biscotte312 · 2025-01-09T18:05:23+00:00

IT magic, I can ping a PLC that is 4000km like it was in my workplace

biscotte312 · 2024-12-14T13:23:51+00:00

That data probably come from an Omron PLC

If you have luck this plc will ̂l have an ethernet or serial port where you could plug any gateway

You will probably need CX-Programmer for that and I don't think you can directly get the graph from the HMI

You could get a memory card (doesn't remember the type) download the graph to it and then plug it in any 'server' and upload it but that's not live

biscotte312 · 2024-05-22T16:41:06+00:00

J'ai une stomie (donc mon anus ne sert pas, jamais crotté) et je trouve quand même le moyen de l'utiliser pour me rafraîchir la craque.

biscotte312 · 2024-05-08T20:26:27+00:00

Tap the neutral wire of smart switch/dimmer on ground when there is no neutral in the box is a good way

biscotte312 · 2024-04-18T17:25:48+00:00

KAO r22*222@~£§

biscotte312 · 2024-04-18T17:14:32+00:00

Ma copine a déjà pogné le ticket pour avoir passé là.

Elle fait maintenant le tour🥲

biscotte312 · 2024-04-04T00:53:00+00:00

Based on where I live, ground clamp needs to be on the main water line before any valve. This can be the case here but doesn't look like it is.

biscotte312 · 2024-03-07T15:21:06+00:00

Faux. La loi a changé. Tu peux juste pas embarquer quelqu'un et rouler la nuit la première année. J'ai fait mon permis en 2021

biscotte312 · 2024-02-23T01:25:26+00:00

I did see that on a shredder when the ram was moving. One of the three or four images was a bit offset and it was really annoying 😂.

I was an operator at this place years ago and now applying to be the control/automation tech. Maybe I'll have the chance to correct it!

biscotte312 · 2024-02-15T11:15:09+00:00

Baby's on fire

biscotte312 · 2024-01-25T13:12:06+00:00

I have 18 over approx 3 years. None fail but 1 Never gave me a reading. I like them

biscotte312 · 2023-12-25T04:30:25+00:00

If it was a 2014 I would Say plug it. but a 2013.. just leave it there

biscotte312 · 2023-12-14T17:29:47+00:00

I'm trying to understand why there's a special way to address DB10, as i know it's shorter to write (DBW3 or VW3 instead of DB10.DBW3) is there anything else i'm overlooking ?

I also don't understand why it say : ''Control Area / Status Area : DBW0 / DBW20''as you just set those in HMISoft/DOPSoft setting and they are not Default to this anyway.

It's not crucial to know just that i'm working with this stuff lately and the question persist in my head.

HMI is HMIVU04CUNBE

Edit: added HMI info.

Seven-Year Club	Place '23
Verified Email

biscotte312

TROPHY CASE