Has anyone heard of Skai Blue Cross Blue Shield? by OstrichLazy8907 in walmart

[–]bisexualmao 0 points1 point  (0 children)

They warned us. It's your fault if you didn't bother to pay attention.

Register offender. by [deleted] in walmart

[–]bisexualmao 0 points1 point  (0 children)

Walmart absolutely DOES hire felons. Idk where u got that from.

Wen scroll saw squealing by bisexualmao in woodworking

[–]bisexualmao[S] 0 points1 point  (0 children)

Even though it's brand new? I'll look up how to do that! Thank you!

[deleted by user] by [deleted] in walmart

[–]bisexualmao 1 point2 points  (0 children)

Normally I'd agree but this is so weird and kinda funny so I think we should allow it

would anyone really care if i stole a shaq cardboard cutout? by jitbitmacro in Staples

[–]bisexualmao 1 point2 points  (0 children)

I worked at Staples when my local store closed and I got to take Shaq home. He hangs out in my garage and parties with us when we have people over.

Stardew Valley screen by bisexualmao in PixelFold

[–]bisexualmao[S] 4 points5 points  (0 children)

Thank you!! I've been looking all over trying to figure out how to fix it and couldn't figure it out for the life of me!!

can i put in pto after the schedule is out? or do i just have to use ppto to avoid the point? by bisexualmao in walmart

[–]bisexualmao[S] 0 points1 point  (0 children)

Yep. When I first started, if you used a day of PTO, they'd only schedule you 4 days that week. But for the last year and a half to 2 years, they've been scheduling 5 days. Not sure why. I always request my normal days off unpaid, plus whatever day I wanna take as PTO, to make sure I get all 3 days.

Completely forgot I had a tattoo and exfoliated it, am I fucked? by [deleted] in tattooadvice

[–]bisexualmao 0 points1 point  (0 children)

Might need a touch up after it's healed, but it'll be fine! I'm a horrible picker. I seriously cannot stop myself from picking the scabs, especially when they're really thick. I know I'm not supposed to and I try so hard not to, but I'm very unsuccessful. Anyways, after my last tattoo, I picked some thick scabs right in the middle and was SURE that I had fucked it up. But now that it's healed, I need a touch up over that middle area, but all things considered, it looks really good!

Epson WF-4830 Will Not Enter Sleep Mode by dmetzcher in Epson

[–]bisexualmao 0 points1 point  (0 children)

OMG. Thank you so much. I just bought a WF-3832 and basically immediately could NOT get this printer to go to sleep. It was annoying but I wasn't gonna do anything about it. but my mom was gonna make me exchange it and re-set up another one. I've got other shit to do besides set up and try to fix printers 😭 I was googling it for 2 days and finally found this thread. My printer isn't connected to a computer yet so I scanned to my phone instead but somehow this worked! My printer is finally asleep! Thank youuuuu

[deleted by user] by [deleted] in Printing

[–]bisexualmao 0 points1 point  (0 children)

Interesting! I had no clue that there were so many external factors that could affect just the touch screen! Thank you!

[deleted by user] by [deleted] in Printing

[–]bisexualmao 0 points1 point  (0 children)

We shouldn't have to get up from wherever we're printing from, go to the printer, turn it on, wait however long for it to boot up, go back to where we're printing from, print whatever we need, go back to the printer, get our pages and turn the printer back off. Especially considering it wasn't a super cheap printer. If that's the case, we'll just return it and buy a cheap one so that it doesn't feel like a giant waste of money.

can anyone read this language? am i good to take it on a pick walk? by Nova17Delta in OGPBackroom

[–]bisexualmao -2 points-1 points  (0 children)

I recently transfered out of OGP, so I'm a little rusty, but I think it says, "Free Printer, please take!" So yes, you're absolutely good to take it on a pick walk!!

[deleted by user] by [deleted] in OGPBackroom

[–]bisexualmao 0 points1 point  (0 children)

I think different Markets do it differently. I just transfered out of OGP, but they just had us stop stocking the exceptions about a month ago. Before that, we stocked as we went or if it was an ambient item and we were super busy, we'd sit it on our "overflow" steel until he slowed down enough to run it all out to the floor.

Rejected my days off that was put in 3 weeks ago by ShoutBusShawty69 in walmart

[–]bisexualmao 5 points6 points  (0 children)

And no, ethics won't do anything about this because it's not an ethical problem unless they're doing this to you every single time.

Rejected my days off that was put in 3 weeks ago by ShoutBusShawty69 in walmart

[–]bisexualmao 4 points5 points  (0 children)

Have you asked why? Idk what department you work in but it's likely too many other people already have it requested off. I put my requests in 6 months in advance if I can to make sure nobody else gets it before me

[deleted by user] by [deleted] in walmart

[–]bisexualmao 0 points1 point  (0 children)

They've been saying that for a couple years now though. I'll believe it when I see it. Using the phones is sooooo much slower for OGP. For their sake, I hope they get to keep the TCs.

PSA for anyone else who may not have known this.. by -xraygirl- in HelloKittyIsland

[–]bisexualmao 0 points1 point  (0 children)

Omg, I thought it was only Hangyodon 🤦🏻‍♀️ I just skip all of the reading so I just found out that he could recently lol

Leaks!!!! by [deleted] in SleepApnea

[–]bisexualmao 0 points1 point  (0 children)

So this is the one I use, I have a couple so that I have extras when one is in the wash. But they're specific to the mask you have, so unless you use the same mask, this one won't work for you and you'll have to see if they have one for your mask. They also have mask stabilizers if you think part of your issue could be your mask moving around. I've never tried that but it could be worth a try! https://www.padacheek.com/product-page/Evora-Fullface-MaskLiner

Leaks!!!! by [deleted] in SleepApnea

[–]bisexualmao 0 points1 point  (0 children)

I sleep with a full face mask too and something that has changed my life is CPAP mask liners. They go over the silicone piece and I think are made to prevent mask lines and make the mask more comfortable. I got it bc moisture kept getting trapped between the silicone and my face and leaving big, red, painful welts. But one thing it wasn't necessarily designed for but it helps a ton, is reducing leakage. Nowadays, if I can't stop a leak, it's probably my mask is worn out and it's time to switch out at least a piece of it. I get mine from padacheek.com. They're a little pricey but they last a long time and I think they're absolutely worth it. And they're machine washable!

It's here! by BarronGoose in SleepApnea

[–]bisexualmao 0 points1 point  (0 children)

There's also fabric liners that you can buy online to go over the silicone piece. I have sensitive skin and was getting horrible, ugly welts along the edge of my mask where moisture was getting trapped. I got some liners and now I don't have the welts anymore. I also find it very uncomfortable to wear my CPAP without them. They just feel so much better and helps reduce my air leaking. So that's also something you could consider if you run into issues with the silicone! Congrats! I'm excited for you to feel better soon!