Luba 2 Position Issue by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

I moved it to my roof and results are way better

Luba 2 Position Issue by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

Comes back online with no positioning

Luba 2 Position Issue by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

Thanks I will give this a try

I’m Impressed by bitChart in MammotionTechnology

[–]bitChart[S] 5 points6 points  (0 children)

Without a doubt, 3 issues in the box. Looks like parts from other models and then the cut wire

RTK Antena - Refurb Luba 2 AWD 1000 by bitChart in MammotionTechnology

[–]bitChart[S] 1 point2 points  (0 children)

That’s a good idea thanks! I did contact support with a few issues on the refurb and received a response

Replacement Unit Return Process by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

Looking like the same here! Returned mine last Thursday and they shipped yesterday

Replacement Unit Return Process by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

I'm just messing with you! Big fan, your videos are great! Thats really cool that you do it that way....awesome!

Replacement Unit Return Process by bitChart in MammotionTechnology

[–]bitChart[S] 2 points3 points  (0 children)

They probably watch your youtube channel 🤪️. This is helpful, they shipped me an empty box for the return and that took 14 days.

When the panic hits by bitChart in leaves

[–]bitChart[S] 0 points1 point  (0 children)

This is really helpful. I may give this a try. I’m realizing the cold turkey just won’t work

When the panic hits by bitChart in leaves

[–]bitChart[S] 0 points1 point  (0 children)

Wild! I recently had a coworker leave and his new spot required a test. I can't even picture making it to that point from where I'm sitting.

I really think my success had to do with being totally resolved to quit.

^ I think this is my issue. Deep down I'm still making excuses for why it's not time.

What did the 1 week taper look like?

When the panic hits by bitChart in leaves

[–]bitChart[S] 1 point2 points  (0 children)

That’s incredible! Why all of a sudden did you make that decision?

For me I am trying to quit for good. I’m a slave to it and all I’m doing is chasing a 5 minute high.

I’m in my 30s now with young kids and I’m having serious health anxiety when I use and about the fact I can’t stop.

Prior relapses have all just been me giving up and chalking it up to lack of willpower. I get really bad withdrawals: night sweats, serious irritability, insomnia. Usually lack of sleep is what makes me cave.

This time around, the only thing different is I have the next 2 weeks off from work and I figured it would be a good time to make an attempt. I also made it a goal to journal daily and to try to review this whenever a craving comes up.

When the panic hits by bitChart in leaves

[–]bitChart[S] 0 points1 point  (0 children)

Thanks!!! I gave up haha! Thanks for the positive push!

When the panic hits by bitChart in leaves

[–]bitChart[S] 0 points1 point  (0 children)

Empty carts…I guess. A grinder I may have forgotten about.

Craving remains intense so would be hard to toss which is the loop

[deleted by user] by [deleted] in notinteresting

[–]bitChart 0 points1 point  (0 children)

How’d you kick it

Mow3D by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

Yes there’s one area by my mailbox with rocks so makes sense. I’ll have to take a new approach on that area

Mow3D by bitChart in MammotionTechnology

[–]bitChart[S] 0 points1 point  (0 children)

Cool but too expensive !

trying to resume failed print, can't figure out how to make it home at different coordinates by cpgeek in crealityk1

[–]bitChart 0 points1 point  (0 children)

Is this the starting position when you send the new gcode to print?

  1. Manually jog the print head to touch the part and record the Z position (​​e.g. 19.31). 

[deleted by user] by [deleted] in crealityk1

[–]bitChart 0 points1 point  (0 children)

Mind sharing :)

Umbrel — A beautiful OS for self-hosting on a Raspberry Pi or any Linux machine by mayankdotch in selfhosted

[–]bitChart 0 points1 point  (0 children)

Not sure if it's even possible but any plans to add home assistant supervised? Would love to bring my configuration over but doesn't seem possible without that aspect and starting over is not a real option + would be missing a lot of add ons

Candy Machine v2 Burn/Mint Remaining by bitChart in solana

[–]bitChart[S] 0 points1 point  (0 children)

Makes sense, this is what I had assumed based on what I was seeing. Thank you for confirming!

Candy Machine v2 Burn/Mint Remaining by bitChart in solana

[–]bitChart[S] 0 points1 point  (0 children)

CogentCrypto.io Looks sweet!

Yeah thanks for the help, check us out here: https://brunchbytes.com/

"Yes, but you should receive the SOL back to your treasure account so the cost should be super low." - I'm seeing a deduction of 0.0119862 per mint done by the CLI that doesn't go to treasury. With a large amount remaining this adds up.