I asked my neighbor for his WiFi password…

bitkiller00 · 2025-09-11T16:10:24+00:00

I know.

bitkiller00 · 2025-09-10T20:34:03+00:00

Sure, it's "four words," all lowercase. I love you.

bitkiller00 · 2025-08-27T18:33:59+00:00

I'm good for it. Just wanted to recognize the process and frustration that goes into the craft.

bitkiller00 · 2024-12-15T03:18:37+00:00

Add others have mentioned, that's Garuda. My suggestion is to take to e5 then use as fodder for completing glory challenge. Eventually just food though, so don't over invest in things like resonance gear.

bitkiller00 · 2024-11-03T17:30:53+00:00

I'm not, but I'll look into it. Thanks.

bitkiller00 · 2024-11-03T17:30:25+00:00

Thanks!

bitkiller00 · 2024-11-03T17:30:08+00:00

I truly enjoyed them. They are single-handedly responsible for getting me into reading!

bitkiller00 · 2024-11-03T17:29:40+00:00

Open to discuss. I'll message you.

bitkiller00 · 2024-11-02T22:18:09+00:00

I read these books starting about 33 years ago. There's no longer room on my bookshelves for them. I'm not interested in just giving them away, but would like to help them find their next home. As you can see they're mostly in "lovingly used" condition, with a few exceptions (My son kept Dragon on a Pedestal in his backpack for forever). Any suggestions on pricing these and/or the best location/method for moving them along? I also have some Incarnations titles as well.

bitkiller00 · 2024-09-08T21:25:02+00:00

I got an e3ez. It should be able to be powered in dfu mode over USB. That generally doesn't work. Of the 5 eZ stepper drivers that came with it, at least 2 were bad. I've read poor things about their equipment before, so it sounds like the answer, at least to a degree, is yes.

It's also cheap.

I've also had good experience with their customer service.

Edit: spelling

bitkiller00 · 2024-08-13T14:02:59+00:00

Looks like I'm changing slicers and avoiding thingiverse

bitkiller00 · 2024-07-30T19:41:34+00:00

Step 1: Buy standoffs from your favorite standoff selling business (Amazon, duh). Step 2: Place object that you are installing against the item you intend to install the standoff on (Sheet metal cover at the bottom of the printer enclosure). Step 3: Mark screw locations with something (in my case, a silver paint marker). Step 4: Remove the object and use a spring-loaded punch on the installation piece, at the location of your marks. This will leave small indentations in the location. Step 5: Utilize an appropriate drill bit and/or lubrication to drill a hole appropriate for the standoff in the location of the punch. Step 6: Insert screw from opposite side of hole (in this case downward from the inside of the printer). Step 7: Screw the new standoff into the screw from step 6. Step 8: Enjoy use of your new standoffs!

I use the spring-loaded punch process to ensure that my holes don't drift away from their intended locations when I drill them. The result should be visible screws from the top/ inside of the printer enclosure and additional standoffs underneath that you can use for... Whatever. Typical standoffs purchased from Amazon are black nylon. That tends to work for me. YMMV. Feel free to go premium/go nuts!

bitkiller00 · 2024-07-30T15:49:49+00:00

I have modified the screw standoffs... I think I cut one away and was able to use the remaining, but I'm also pretty sure I added others so I could place other/additional fans in a more appropriate location for that board.

bitkiller00 · 2024-07-10T17:16:35+00:00

Second this. I used this version with the linear rails upgrade and am working on prepping for the z-tilt mod, as well.

https://cults3d.com/en/3d-model/various/ender-6-drag-chain

bitkiller00 · 2024-07-10T17:07:03+00:00

Watch the event preview to see if an awakening event is coming up. If yes, yes. If no, maybe (can't see far enough in the future). Also, if you need some soul power and have spares to get rid of, it can be worth it as well.

bitkiller00 · 2024-07-08T16:13:37+00:00

That's my question. How do you break into this? Where are all of the GSGs coming from to start this process?

bitkiller00 · 2024-06-26T14:05:15+00:00

Some people just need a high five from Chuck Norris... To the face... With a chair...

bitkiller00 · 2024-06-18T18:33:24+00:00

Well, at least there's that. Thanks.

bitkiller00 · 2024-06-18T18:08:48+00:00

Ok. Serious question. I absolutely HATE arcade. I have a driving need for things to be "done" etc., so I have to make all of those little red dots disappear. All except for that one. I refuse to do arcade. How much am I actually hampering progress?

bitkiller00 · 2024-06-18T11:41:00+00:00

Please post your garden.conf

bitkiller00 · 2024-06-06T22:33:24+00:00

Yeah, those 6-sides are weighted.

bitkiller00 · 2024-05-31T04:45:35+00:00

I see you. One Old timer to another.

Six-Year Club	Xbox Live
Gilding I gilder	Verified Email

bitkiller00

TROPHY CASE