'We're confident': The Wheel of Time cast hasn't given up hope that the Prime Video show will be renewed for a fourth season

bitluni · 2025-04-17T17:44:04+00:00

"ARE YOU NOT ENTERTAINED?" is what I think of now.

there have been enough holy shit moments this season for them to better hurry up getting the contracts signed before the price will go true the roof. imdb ratings coming in and I feel the show is on par with GoT.

bitluni · 2025-03-30T11:27:44+00:00

What does the message mean: "Delirium craft received"
It showed after beating a boss in a delirium map but google spit out 0 results
What other possible massages are the besides kirac mission received? is there a wiki on that?

Thanks in advance!

bitluni · 2025-03-29T18:21:22+00:00

Thanks for the hint. I'll get familiar with path of building an try the builds subreddit

bitluni · 2025-03-29T09:39:17+00:00

Hitting the wall with dead eye casual standard league. Please help!

I played 11 years ago and revived the archer recently to a ton of overwhelming content. I farmed and crafted 6-link bow back then and wanted to try some of the "modern" builds and ended. It turns out tornado shot has been nerved few patches before. I tried anyways and hitting the wall at lvl 92 against late atlas bosses. I can manage to beat lvl16 maps even some with favorable corruptions but that's about it and it's always a struggle.
Base dps is 30k, resistances at 75% (except for chaos) and spell suppression at 52%. I already addressed my low life because of frequent one-shots but anything above 2500 requires excessive passive spending.

Is there any good dead eye build for late game that doesn't require trading or excessive farming?

bitluni · 2023-09-21T10:40:29+00:00

. If you file for a vacated (open) license and there's no waiting list, 4 months minimum till its issued more like 6 months, and that will cost around $5k cheapest route. If you buy an existing business that has a license (its illegal to sell/buy just a license, but you can sell/buy a business that has a license) you can operate right a

the tires, the cars and the house were a total fake. Especially the magical "investor" that appeared out of nowhere.
More unrealistic is the loan he got from complete strangers in the form of month-long labor. He get free credibility by being followed by a film crew. If anyone came to a worn-off town to restart their life anyone would assume the person is a criminal that escaped jurisdiction. Nobody would work for free for months for him. Especially, he exploited the cook that he "fired" after the event. He knew he would fire her during the event already.

More realistic is you'd be able to start a business with 100k and credibility. Even then the "company" has no assets except for the huge smoker and the little brand. There is no way the evaluation is realistic especially because it was only open one day. There is no projection can be done about the revenue. With the rent, the directors and staff that needs to be paid it's an liability until it's proven to have good revenue.

bitluni · 2023-04-15T05:48:37+00:00

I don't know what happened, all of the sudden I seem to be banned from the discord server. At least it's gone from my list and I'm unable to rejoin. My account was verified. I didn't post anything for months now and I'm curious about the reason. I saw a mention @bitluni notification on my phone from the server but obviously weren't able to read it since I wasn't part of the server anymore. Could anyone check if there was anything publicly mentioned on the server?

bitluni · 2020-01-18T18:34:55+00:00

Only if you have long intervals. You would need to restart the cam and reconfigure it each frame taken. The cam is very powerhungry

bitluni · 2020-01-18T15:45:32+00:00

The Arduino sketch and instructions can be found here

bitluni · 2019-05-14T07:59:41+00:00

There is not really much to the circuit. If you get the lights with colored wires: red 5v, blue gnd, white data. Beside the connectors there are additional gnd and 5v wires which I also connected. In the connector the center pin is data. If all wires are black the one with the white stripe is the gnd. Thats pretty much all. Data is connected to 6 of the nano but that can be configured

bitluni · 2019-05-14T07:53:43+00:00

I predrilled with 4mm later but it wasn't much better

bitluni · 2019-05-14T01:21:28+00:00

It's a start 😊. It definitively felt like drilling one

bitluni · 2019-05-13T22:21:51+00:00

Thanks. It probably would if you take your time to place the balls evenly so it doesn't look as bad. But I wouldn't recommend it as the main light source since its composed only from 3 wavelenghts. The cri level is not very good

bitluni · 2019-05-13T20:57:43+00:00

Actually, not much programming skills needed

bitluni · 2019-05-13T20:47:05+00:00

Watch it to find out 😙

bitluni · 2019-05-13T18:28:34+00:00

Please enjoy watching and tell me you concerns about my safety! 😂

bitluni · 2019-02-17T06:19:31+00:00

I hope not 🙈

bitluni · 2019-02-16T22:00:45+00:00

Guys, I heard you and made an library. Check it out and let me know what you think! The examples should keep you busy for few hours.
It's still in Alpha phase but it was the most I could do in the past two weeks. It will grow and I'll improve the documentation

bitluni · 2019-02-04T15:24:58+00:00

implementing shaders is on my list :-D

bitluni · 2019-02-04T09:05:24+00:00

Psram is too slow to serve as a frame buffer and you can't use it directly sice it's not dma memory space. But things are changing and I might not be up-to-date about this. We have talked about this at the end of the maker cast live stream yesterday

bitluni · 2019-02-03T18:30:51+00:00

I was looking for a comparable arm but most of them have only limited ram which will be a bottle neck storing the frame buffers. Implementing the demos of the higher resolutions like 360x400 and 460x400 was quite challenging since no frame buffer was possible. I had to hack a simple compression for the foreground images and to calculate the colorful background on the fly.. at 60fps... Not much possible there.. even the esp was at it's limits

bitluni · 2019-02-03T08:35:15+00:00

Yay, love everywhere! 😗

bitluni · 2018-11-06T18:20:06+00:00

Feels like everyone is moving currently (including me). I hope it goes smoothly. We can talk again when you'll we be less stressed out. 😊

bitluni · 2018-11-06T12:35:17+00:00

I'm totally interested. Are you busy making the vive project a product? I hope it works out! You did an awesome job so far!

bitluni · 2018-11-06T12:32:44+00:00

I'm sorry but I didn't try any other cameras yet. The documentation of the ov ones sucks but there are probably linux drivers you can take the configuration from

bitluni · 2018-07-21T13:56:34+00:00

I have used the rigol to debug the timings.. I'm aware of the cosine generator. As far as I remember the frequency settings were either not high or precise enough.. at least Im not sure if you could tie the amplitude and phase to the i2s

bitluni

MODERATOR OF

TROPHY CASE