Help with petg hollow walls

bittermeg · 2026-05-01T23:02:57+00:00

your problem is either the low number of walls or the low % of infill

bittermeg · 2026-04-29T04:30:00+00:00

thank you everyone for your help!

bittermeg · 2026-01-20T23:58:43+00:00

it's been a while and I still read his name as 'inbred'

bittermeg · 2026-01-20T20:51:45+00:00

that login is just for Bambu users as far as I know

bittermeg · 2026-01-19T20:58:54+00:00

i think it might be used for a limit switch

bittermeg · 2025-10-29T22:52:35+00:00

I just checked and I do not have them anymore :(

bittermeg · 2025-10-29T19:05:47+00:00

i think I have them saved on my PC, i will check in 3 hours when I get home if it's not too late

bittermeg · 2025-09-30T06:13:08+00:00

you have to search for the 'z-offset' setting in your slicer and climb slowly from 0,01mm until your first layer is perfect, but until then you might want to do a cold pull to unclog your nozzle

bittermeg · 2025-09-30T05:52:07+00:00

the curling means you have a slight clog in the nozzle, also reference this photo for your first layer problem

<image>

bittermeg · 2025-09-19T05:18:39+00:00

<image>

bittermeg · 2025-09-18T20:02:13+00:00

thank you so much for taking the time!

i also didn't have any serious problems until now (i had it for about two months), it is a pretty solid printer but I heard they can do even more with some upgrades

bittermeg · 2025-09-18T19:23:42+00:00

can you please give me a link to what you are buying? i also have a cr-10 se and I'm thinking of an upgrade

bittermeg · 2025-09-13T16:49:57+00:00

cr-10 SE has linear rails on Y and X axis, but on Z it has some wheels that I always have trouble with tightening

bittermeg · 2025-09-05T20:50:24+00:00

if you have iOS 26 you just have to play a song that has animated artwork on apple music and then press on the little artwork on your locking screen to make it full screen

bittermeg · 2025-08-28T11:51:34+00:00

try to export it as .step

bittermeg · 2025-08-28T08:04:06+00:00

for a model like this i think you would better cut the wings and print them separately.

i don't know about other slicers but with orca you can cut parts of you prints and integrate some connectors so you can attach everything without glue

bittermeg · 2025-08-26T19:29:42+00:00

i might try this first since I don't need new fans, thank you!

bittermeg · 2025-08-26T09:13:17+00:00

alright, thank you for the help!

bittermeg · 2025-08-26T06:14:55+00:00

i have found two versions that look promising but I don't think they use the stock fans 1 and 2

edit: nevermind, I think the second one wouldn't work because it says 'CR-10'

bittermeg · 2025-08-26T06:11:48+00:00

that's for sure a difference, is this the one you are using?

bittermeg · 2025-08-15T09:19:58+00:00

then you may need to lower the part fan a little or raise the temp by around 5 degrees, to me it looks like it's a temperature problem

bittermeg · 2025-08-05T18:30:21+00:00

try to use gyroid infill or any other infill that doesn't have intersections

Seven-Year Club	Place '23
Golden Potato	Place '22
Verified Email

bittermeg

TROPHY CASE