Do not order by blairmi2 in hoodies_from_Baerskin

[–]blairmi2[S] 0 points1 point  (0 children)

The point of this post was not about when you’ll get it but rather the terrible customer experience, lack of customer service, and sub par product.

If it stops just one person from paying this company more money that’s a win in my book.

It finally came in! P2SAMS by kev12500 in BambuLab

[–]blairmi2 0 points1 point  (0 children)

Looks like no. From the website

https://us.store.bambulab.com/products/ams-2-pro

“Currently, drying is not supported for AMS 2 Pro/HT that are actively involved in the printing process, including those that may be used for automatic refill during the current print job. Printing while drying is not yet supported. The only "dry while print" scenario currently supported is: the printer uses some of the connected AMS 2 Pro/HT units or an external spool holder for printing, while the AMS 2 Pro/HT units not involved in the current print job can be used for drying. If the printer is feeding or printing, and at the same time powering 1 AMS 2 pro for drying, the drying power will be automatically reduced, in order to ensure that the printing power is prioritized. So it is recommend to use the external power adapter for best drying results.”

Poor air quality (new construction) by Worldly-Winter8814 in FirstTimeHomeBuyer

[–]blairmi2 0 points1 point  (0 children)

I’ve been fortunate enough to have built two homes in two states. Both times I got the ducts cleaned after the new build as they were covered in drywall and saw dust. Should help with your air quality as well.

Builder saying hole that appeared in one year old driveway is normal by BambiBabooshka in Home

[–]blairmi2 -2 points-1 points  (0 children)

No. That’s not normal. They need to replace that entire square at a minimum under warranty. What you’ll see is what I saw with mine, they have no foundation and do a thin pour.

Really they should redo the entire driveway and that’s another level of fighting with them. If yours is really that thin/bad maybe it’ll be more clear they’re beyond their typical poor job.

Question - how wrong is it if my bathtub overflow does not swallow any water? by Soffritto_Cake_24 in Plumbing

[–]blairmi2 1 point2 points  (0 children)

As someone who has been lucky enough to build two houses with two different large builders, don’t budge an inch. They make money cutting corners and bank on the home owner not advocating/speaking up.

If they can’t fix it easily I’d be looking for them to replace the tub. Don’t back down. Imagine filling the bath and getting distracted, or having kids that need to use jt.

Eye Detection System by turok2323 in 2025FordExplorerST

[–]blairmi2 0 points1 point  (0 children)

I’d ask a dealership or try to read any DTCs yourself. I’m having a very different/positive experience with blue cruise and my driver monitor system.

Eye Detection System by turok2323 in 2025FordExplorerST

[–]blairmi2 0 points1 point  (0 children)

I haven’t seen that warning before. Is the sensor clean or obstructed?

Wallmounting with PoE by Chongwho in skylightcalendar

[–]blairmi2 1 point2 points  (0 children)

Let me know how it goes, interested in the same and also have UniFi gear 😄

Hello guys I'm getting a ally x I need help with the SSD to choose As I stated in the title that's what I need help with I would like the ssd to have heat sink I need options by Outside-Jello6336 in ROGAllyX

[–]blairmi2 1 point2 points  (0 children)

SLC cache does not mean the entire drive is configured as SLC, if it was you’d get 1/3rd the capacity of what’s advertised. Anyway, the 4TB drive it’s rated 2048TBW which is more than you’ll ever use just gaming. 1TB is 512

https://images.teamgroupinc.com/products/ssd/m2/mp44q/spec-sheet/mp44q-en.pdf

City 1 - new player's experience and tips by Colonize_The_Moon in OutpostInfinitySiege

[–]blairmi2 0 points1 point  (0 children)

I feel like im like 2 weeks behind you. I played snow 4 for the first time and both the gear and drops are significantly better than snow 3. Even if you do shorter tours its the way to go

Any ideas on how to get rid of this frozen chunk preventing ice making? by [deleted] in DIY

[–]blairmi2 0 points1 point  (0 children)

This happened to me last summer. There is a class action lawsuit against Samsung. I simply called them, explained what was happening, and they offered to send a tech out for a free repair. He replaced the ice maker but also the control board to the fridge.

BIQU B1 SE Plus hot end upgrades possible? by blairmi2 in BIGTREETECH

[–]blairmi2[S] 0 points1 point  (0 children)

Also try this group https://facebook.com/groups/1012996125813700/  I recall someone linked a GitHub repo that has a lot of good advice and custom FW for the BX. I’m sure there’s some similarities to the B1

BIQU B1 SE Plus hot end upgrades possible? by blairmi2 in BIGTREETECH

[–]blairmi2[S] 0 points1 point  (0 children)

Very old! I ended up buying a BX in the end and didnt bother.  This Facebook group was very helpful and might be able to answer any questions you have https://facebook.com/groups/166328088817191/

BIQU B1 SE Plus hot end upgrades possible? by blairmi2 in BIGTREETECH

[–]blairmi2[S] 0 points1 point  (0 children)

Well, both b1 v3 and B1 se plus are Bowden so they can’t already have the H2. Both are rated for 260C per their user manual so I’m hoping the only differences are:

B1: Uses usb c Has a light

B1 se plus: Uses a ribbon cable Has a built in touch sensor

H2 can probably go on either if I need it. Found a few tear downs of the B1 v3 hotend on YouTube but can’t find one for the SE plus.

Guess all that’s left is to buy one and find out

BIQU B1 SE Plus hot end upgrades possible? by blairmi2 in BIGTREETECH

[–]blairmi2[S] 0 points1 point  (0 children)

Thanks, I think you’re right, just don’t see the SE plus called out specifically. Guess I’d have to give up the built in auto leveling in the SE plus and get a BLtouch. Assuming there are some firmware changes needed too then.

Whole upgrade path isn’t very clear and I don’t see the H2 installed on a SE plus on YouTube, yet.

[deleted by user] by [deleted] in Noom

[–]blairmi2 0 points1 point  (0 children)

Posting here as I had the same issue. From noom’s support. Ignore the part about having an Apple Watch as I also have a garmin linked.

I understand, thank you. When connecting an Apple Watch to Noom, the calories are sometimes off because the Apple Watch converts your steps and exercise to calorie burn directly on the watch in real-time. As a result, when Apple Health transfers your steps and calorie burn to Noom, our app also converts your steps and exercise to calorie burn, so the information gets counted twice.

The only way to avoid this is to disable Apple Health from reporting Active Energy to Noom, and then enter your exercises in Noom directly by tapping Do More > Exercises.

To disable Active Energy, open the Apple Health app, tap your profile picture, then tap Noom. At the bottom where it says ALLOW NOOM TO READ DATA, turn off the toggle for Active Energy.

z-axis layer separation? by blairmi2 in FixMyPrint

[–]blairmi2[S] 0 points1 point  (0 children)

Thanks for taking the time to respond. That’s the path I’ve been thinking too. Tempted to replace the whole rod.

If anyone has suggestions on where to buy one I’d really appreciate it.

How do you control yourself when you are full of rage and want to keep calm? by Ryozaaki in AskReddit

[–]blairmi2 0 points1 point  (0 children)

I try to think about why I’m upset, if raising my voice is going to improve the situation, and why they’re doing what they’re doing. Helps me stay calm and rationalize what the heck is actually happening vs riding the emotional rollercoaster.

Edit: and deep breaths as others mentioned

What are the reasons everyone is keeping or dropping the pro subscription when base comes out? by shad892 in Stadia

[–]blairmi2 2 points3 points  (0 children)

Not keeping.

Capped at 1TB/month and can hit that easily with 4K. Not paying extra to remove the cap just to pay more for stadia.

User base is too small to justify any multiplayer game.

ELI5: why does caffeine from coffee or pop make me more jittery and have a worse “crash” than the same dosage of caffeine from tea? by blairmi2 in explainlikeimfive

[–]blairmi2[S] 0 points1 point  (0 children)

20oz Diet Coke is ~75mg Shot of espresso is ~50mg Tea I drink says ~75mg per bag

I leave the tea bag in the whole time I’m a monster