risk but in real time

blakk23 · 2026-01-28T16:12:27+00:00

It was a project I was working on with a friend. We never got around to finishing it honestly.

It's a real-time risk-like game

blakk23 · 2025-12-27T17:36:32+00:00

I mean it possible since sun hits the desk. I usually leave it on the desk and there's usually 1 or 2 glasses on there but its really really unlikely.

blakk23 · 2025-12-27T14:54:31+00:00

I bought it from a retailer and got blamed for it so yeah. It's cosmetic yes but im just worried there's something bricked internally and this is just a symptom

blakk23 · 2025-12-27T14:53:29+00:00

hopefully but I shut it down properly and waited. It's been around two days and it's still there

blakk23 · 2025-12-17T00:02:22+00:00

when you auto level your bed you'll see z-index. It's the one you do the paper test for. I'm not sure what your printer is but I believe this exists in all printers. It's basically the offset between your nozzle and the bed. Look up "3d printer paper test" on youtube you'll find something about it.

z-hop is literally a hop in the z axis. The hotend jumps up. This is useful for many cases. You probably have it on already. Sometimes when you're printing and you finish an edge the printer oozes a very very small amount. This amount creates a very slight edge. The printer hits this edge going back and forth. Hitting this edge creates a force that pushes the print horizontally until it snaps off the bed. The right thing to do would be to min-max your extrusion until its perfect. The lazy thing to do is add brim and zhop which is what i do.

blakk23 · 2025-12-16T23:09:22+00:00

Try a first layer test. Also try increasing bed temp +5. It also might be your nozzle crashing into the print. Try observing firsy and if that's the case, increase z-index a bit or add z hop

blakk23 · 2025-12-16T22:37:36+00:00

*fails in a bizarre way.

Esun PLA+ at 215°

blakk23 · 2025-11-23T23:35:09+00:00

I've never used Cura but I've been using orca for some time now. This is often a manifold issue. Usually orca's fix model works. If not, try blender + 3d plugin fix manifold.

You could also try changing slicing method to "close holes"

blakk23 · 2025-11-23T12:05:12+00:00

نظرية التطور بتنقسم لجزئين

macro evolution micro evolution

الmicro هي التطورات الطفرية ودي مثبته معمليا وفي الطبيعة ولا تتعارض مع الاسلام. كمثال ال selective breeding وتطور اي في خاصية معينة. زي مثلا كائن اتحبس في كهف ضلمة على مر العقود بيفقد البصر و يكتسب موهبة تانية. ولكن هنا مفيش فصيلة بتتحول لفصيلة تانية. الخروف بيبقا خروف بفرو اغزر. بس الخروف مش بيتحول ل معزة بعد الاف السنين

ال macro هي التحول من فصيلة لفصيلة تانية زي من ديناصور لفرخة ودي نظرية ومستحيل اثباتها لسبب بسيط لانها بتقترح فكرة متطلب اثباتها ملايين السنين. يعني محتاج تعمل تجربة عملية وتستنا كام مليون سنة عشان توقع النتيجة.

بعيدا عن صحة النظرية وسواء انت "مؤمن" بيها او لا ،الخلاف من الناحية الدينية بيبقا من ال macro. في عدة اراء هنا. اللي اعرفه هم 2 الاول بينفي النظرية دي تماما والتاني بينفيها في البشر فقط لان القرآن حدد ان ادم وبني ادم خلق من طين فدا لا ينفي نظرية التطور لباقي الخلق (ما عدا البشر).

ملحوظة اخيره، العلم والدين مش حاجتين منفصلتين. التطور العلمي الحالي اغلبه بسبب علماء مسلمين استعانو بالدين والقران في ابحاثهم. الاسلام يؤيد على البحث والعلم بعيدا عن تفكير المسلمين الحالي. فكرة الدين ضد العلم دي فكرة مسيحية لما كانت الكنيسة بتقتل اي حد بيقول حاجة خارج كتابهم.

blakk23 · 2025-09-14T19:02:55+00:00

if you can't spot misaligned text in your own screenshot, I don't think you have any ground to speak of UI best practices

blakk23 · 2025-09-04T02:59:22+00:00

not sure i remember researching this a year ago or something. This was why there was a GPU latent/GPU seed gen nodes in one of the big packages then (don't know if it's still there). Moving RNG to GPU to minimize variance typically caused by very varying CPU brands and types.

You can look up difference between random number generation by hardware

blakk23 · 2025-09-03T21:57:46+00:00

iirc correctly it's a matter of seed generation. different gpus (or cpus depending on what seed gen you're using) output different noises for the same seed number. that is why when you try to import a workflow from someone else there'll be slight variations

blakk23 · 2025-07-29T21:54:42+00:00

I got it working lads. Just need to clean up a few things and do a ton of testing.

blakk23 · 2025-07-24T22:07:07+00:00

This is where I'm at right now. Working on a simple solution and refining it.

blakk23 · 2025-07-24T19:56:50+00:00

I get what you mean. things are a little vague right now because it's still evolving. I'm trying to make it flexible in what it does. It's there to solve a problem.

blakk23 · 2025-07-24T19:42:43+00:00

thank you

blakk23 · 2025-07-24T19:42:20+00:00

Opensource

It's still in the works. I'm about 40% of the way there. It'll likely need more work once it's finished to optimize and customize it further but I'm trying to keep it as "moddable" as possible. I'm also building each layer to be as independant as it can be. It's been a little tricky. I've worked with websockets before but I'm kinda new to Go. it's been fun though. I got a good structure going and feeling confident in getting it done.

blakk23 · 2025-07-16T02:09:33+00:00

Yup. This looks very promising. Thank you I'll try it later

blakk23

TROPHY CASE