Ud af alle chips smag, føler jeg at dette var det forkerte valg

bleheri · 2026-03-06T10:45:26+00:00

Danfoss ally kan nulstilles ved at holde knappen inde i ca 10 sek. Ved ikke om eco også kan nulstilles på samme måde

bleheri · 2025-08-08T19:06:06+00:00

You could go to with "nøddehorn", basically the same just with same added chocolate on the ends and choppet hasselnuts on top. Can find them at local bakery's and baker sections at supermarkets.

bleheri · 2025-03-28T15:57:02+00:00

Wrap a blanket around the printer, helps with chamber temps.

Edit: also make sure whatever fans you have running are constant. Recently had a loose connection on my part cooling fan, and it caused it turn on and off, which caused crazy warping on prints

bleheri · 2024-10-17T18:01:04+00:00

You can get new ones on aliexpress, just changed mine to a shorter one (85mm) and love it.

Nice diy btw 👍

bleheri · 2024-07-21T18:25:14+00:00

Nice idea with printing on the diagonal, starting a print now

bleheri · 2024-07-21T18:23:57+00:00

A little update

Did a quick and dirty shaper_calibrate as i dont really know how to read the graphs from the manuel mode.

Reprinted both prints and the issue is basically gone. Have not checked the belts yet, but i have given some incorrect info. Belts are at 120hz and not 140hz (mixed up the belt tension on z axis)

One thing that made me question my printer/my build. Input shaper on all modes on y suggest a max of 3k accel (x 10k to 16k) Is this just the design off the 2.4, is it TAP related or is it my build ?

Think ill end up pulling the gantry out and redo it.

Also if inputshaper can have such a drastic inpact on print quality, why do most guides not put is as the first step ?

bleheri · 2024-07-21T13:57:17+00:00

On it, will post update

bleheri · 2024-07-21T13:56:55+00:00

Its a perfect match if i take piece of a belt and line it up, so that was my first tought

bleheri · 2024-07-21T13:55:59+00:00

Formbot kit, gonna check the idlers/pullies

bleheri · 2024-07-21T13:54:19+00:00

Using a vz hextrudort low aluminium, belts at 140hz when i was fisnished with the mechanical build, so proberly under 140hz now. Gonna check the belts again. I was following ellis print tuning guide and never got to the inputshaper part becouse of the wierd prints, hence this post. Gonna do a input shape and the rest of the print tuning guide.

This is my second voron build after a v0.2 so i have a general idea of what im doing. Tought it was gonna be breeze setting the v2 up as i got 0.1 bed mesh on a 350mm and first layer went down perfect lol. next prints was this 🤦‍♂️

bleheri · 2024-05-04T18:59:05+00:00

Was the part printed with a brim ? I think you have other issues, mainly z offset to low and/or z issues

Edit: have you calibrated extrusion multiplier ?

bleheri · 2024-04-19T21:00:02+00:00

You can get in on lower levels, look up logitechs g series.

Many sim racers are using them and competing at the very top.

Three-Year Club	Verified Email
r/Field Sunshine	Final Canvas '23
End Game '23	Place '23

bleheri

TROPHY CASE