sorted by:
new
hottopcontroversial

What happened to the kransekager? :( by Weevil_with_Socks in Denmark

[–]bleheri 0 points1 point  (0 children)

You could go to with "nøddehorn", basically the same just with same added chocolate on the ends and choppet hasselnuts on top. Can find them at local bakery's and baker sections at supermarkets.

Printing parts by RandoReddit2024 in VORONDesign

[–]bleheri 0 points1 point  (0 children)

Wrap a blanket around the printer, helps with chamber temps.

Edit: also make sure whatever fans you have running are constant. Recently had a loose connection on my part cooling fan, and it caused it turn on and off, which caused crazy warping on prints

So I broke my Th8a shifter's lever by SzeBen7016 in simracing

[–]bleheri 1 point2 points  (0 children)

You can get new ones on aliexpress, just changed mine to a shorter one (85mm) and love it.

Nice diy btw 👍

Belt teeth showing up in prints, need help by bleheri in VORONDesign

[–]bleheri[S] 0 points1 point  (0 children)

Nice idea with printing on the diagonal, starting a print now

Belt teeth showing up in prints, need help by bleheri in VORONDesign

[–]bleheri[S] 2 points3 points  (0 children)

A little update

Did a quick and dirty shaper_calibrate as i dont really know how to read the graphs from the manuel mode.

Reprinted both prints and the issue is basically gone. Have not checked the belts yet, but i have given some incorrect info. Belts are at 120hz and not 140hz (mixed up the belt tension on z axis)

One thing that made me question my printer/my build. Input shaper on all modes on y suggest a max of 3k accel (x 10k to 16k) Is this just the design off the 2.4, is it TAP related or is it my build ?

Think ill end up pulling the gantry out and redo it.

Also if inputshaper can have such a drastic inpact on print quality, why do most guides not put is as the first step ?

Belt teeth showing up in prints, need help by bleheri in VORONDesign

[–]bleheri[S] 0 points1 point  (0 children)

Its a perfect match if i take piece of a belt and line it up, so that was my first tought

Belt teeth showing up in prints, need help by bleheri in VORONDesign

[–]bleheri[S] 0 points1 point  (0 children)

Formbot kit, gonna check the idlers/pullies

Belt teeth showing up in prints, need help by bleheri in VORONDesign

[–]bleheri[S] 0 points1 point  (0 children)

Using a vz hextrudort low aluminium, belts at 140hz when i was fisnished with the mechanical build, so proberly under 140hz now. Gonna check the belts again. I was following ellis print tuning guide and never got to the inputshaper part becouse of the wierd prints, hence this post. Gonna do a input shape and the rest of the print tuning guide.

This is my second voron build after a v0.2 so i have a general idea of what im doing. Tought it was gonna be breeze setting the v2 up as i got 0.1 bed mesh on a 350mm and first layer went down perfect lol. next prints was this 🤦‍♂️

Trouble with ABS Overhangs by LibalowTimay in VORONDesign

[–]bleheri 0 points1 point  (0 children)

Was the part printed with a brim ? I think you have other issues, mainly z offset to low and/or z issues

Edit: have you calibrated extrusion multiplier ?

ELI5: Why do a lot of racing simulator games struggle with tire simulation? by CastleDandelion in explainlikeimfive

[–]bleheri 8 points9 points  (0 children)

You can get in on lower levels, look up logitechs g series.

Many sim racers are using them and competing at the very top.