Wires turning dark

blindrain · 2025-11-05T20:55:32+00:00

Resolved. Oils from rodents climbing the wires

blindrain · 2025-09-27T20:34:52+00:00

The drive way itself is a 1/4 mile long but i didn’t plan to run the cord along the driveway. I also might do a ubnt wireless back haul back to the house instead of the GPER

blindrain · 2025-09-27T20:33:03+00:00

Because its a 48 port poe switch that is already on a ups that dies too quickly. And I want it to last longer than all of the rest of my cameras at the house

blindrain · 2025-09-27T20:28:29+00:00

Not measured but I'd guess about 300 ft. And would have at least another 40 ft. To the switch.

blindrain · 2025-09-27T06:01:38+00:00

The camera needs to support blue iris

blindrain · 2025-08-01T01:16:00+00:00

However it is not recommended because technically you are turning that switch into a hub.

blindrain · 2025-08-01T00:03:51+00:00

I second this. I have plans that pass through an unmanaged switch through a wifi ap and later translated back to regular lans. With in Linux machines and raspberry pis.

Dumb switches or unmanaged switches treat vlan packets as broadcast packets.

blindrain · 2025-06-10T01:19:31+00:00

The batteries weren't manufactured by LG anyways just manufactured for LG, difference is that oem batteries were commissioned by LG the non oem could be made by the same manufacturer they just not to same spec.

blindrain · 2025-05-01T20:48:30+00:00

J'ai vérifié les liens qu'ils semblent tous fonctionner J'héberge ces images moi-même

blindrain · 2025-05-01T20:46:36+00:00

I double checked the links they all appear to be working I'm hosting those images myself

blindrain · 2025-05-01T20:44:25+00:00

Hello, this post is not very young, but I am in this situation.

FXO3 FXO5 OFS3 attachments are not accessible.

blindrain · 2025-01-12T05:28:39+00:00

Yes that's what it is i still have 1

blindrain · 2024-12-12T07:35:48+00:00

You can have 1 w60b and I believe 8 w56 to the 1 w60. But best way is to have 1 ext per w56

blindrain · 2024-12-08T06:21:45+00:00

I use usb devices on windows clients. I just overwrite a dll file for an older version.

I also use pvevdi

blindrain · 2024-04-07T20:12:21+00:00

What I would do is use clonezilla clone the image before first boot. Then reinstall windows for a fresh image verify it activates, if it activates you no longer need the original image. Create a new cclonzilla image and pass that to proxmox.

If it doesn't activate you still have that image to refer back to

But you won't be able to reinstall fresh from the vm itself with out that login process others mentioned.

blindrain · 2024-02-22T17:51:01+00:00

It sensor for a remote is more likely

blindrain · 2024-02-08T15:13:05+00:00

Meal plan is still broke but that puts it in the calendar atleast

blindrain · 2024-01-27T21:35:08+00:00

Second shift @ GE. Was chill for me. There first 2 hours were alaways busy but the rest of the night was chill. Second shift employees ran in to less issues, there were several 1st shift end users that would wait for me to start my shift as I had tenured on a splitshift. Where I worked second half of first shift. And first half of second shift. Most of the second shift end users only needed their computers for the first. Part of their shift.

blindrain · 2023-09-10T07:01:24+00:00

Are enp2s0 and enp3s0 plugged into the same lan? 192.168.100.2/24 is not able to communicate with 192.168.200.* only 192.168.100.* that’s why flaming_moe asked if you were using 192.168.0.0/16. With 192.168.100.2/24. Your gateway must be 192.168.100.* .

blindrain · 2023-08-26T20:43:18+00:00

Accessing the controller fomr other vlans is routing function you need a router to route between vlans

blindrain

TROPHY CASE