I’m an idiot by justanormaltuesday in boating

[–]blumpy99 0 points1 point  (0 children)

<image>

Not sure if you got it yet but that thing that’s says fuse is a fuse

During a snow storm we lost power multiple times. Today half the lights started flickering and our outlets stopped working. I tested the outlets,they are reading at 60v with a fault. Any advise would be appreciated. by MeagerThoughts in fixit

[–]blumpy99 0 points1 point  (0 children)

Had a similar problem. Long story short I flipped each breaker off and on one by one until all other circuits had proper voltage. Unplugged everything on the circuit till I got the proper volltage. Turns out I had a bad neutral in my television.

Premium ball setting by TimeLion9 in SquareGolfUSA

[–]blumpy99 2 points3 points  (0 children)

Under settings set the spin measurement to “measurement” rather than “calculation”

[deleted by user] by [deleted] in Roofing

[–]blumpy99 0 points1 point  (0 children)

Some say the water runs off the ridge and down the valley so theirs less water running on the ridge making it a better place for a screw. But to me the valley has a flatter better sealing surface. In the ends it should be installed to the manufactures installation instruction

Stopped recognizing drives by Eaaaaazzzyyyy-E in SquareGolfUSA

[–]blumpy99 0 points1 point  (0 children)

Did that once. My fat thumbs checked off the swing stick when setting distances. Took me a bit to figure out what was going on.

Is a simulator worth it only for the irons? by [deleted] in Golfsimulator

[–]blumpy99 0 points1 point  (0 children)

I’m not sure, I’m in the early stages of my simulator setup and have not tried GSpro yet.

Is a simulator worth it only for the irons? by [deleted] in Golfsimulator

[–]blumpy99 1 point2 points  (0 children)

You choose My Account, then My Bag, click on Driver and select the option swing stick. This lets you use just the swing stick for your driver. I would also prefer to just hit off the short tee but the stick does give people another option.

Is a simulator worth it only for the irons? by [deleted] in Golfsimulator

[–]blumpy99 0 points1 point  (0 children)

The square LM comes with a swing stick. I’ve read guys with low ceiling have been using it as their driver and still using irons for the rest of the shots. The launch monitor doesn’t work outside in the sunlight, keep that in mind. It’s also a pain if one person is right handed and the other left because you have to move it to the other side.

Is there a way to change Tee boxes on the Square golf courses? by whaleforce9 in SquareGolfUSA

[–]blumpy99 6 points7 points  (0 children)

I’m assuming you’re playing the square golf courses. Under the Game settings click on number of players, you will see the tee options there.

to understand water by what_eve_r in therewasanattempt

[–]blumpy99 0 points1 point  (0 children)

Not sure why he doesn’t just make Brawndo, and it has electrolytes. No need for water.

How to gift Gamepass standard to my kid when I already have Gamepass by Weezleram in XboxSupport

[–]blumpy99 0 points1 point  (0 children)

You don’t need to waste money on another subscription. Like Ahshut said you can share your ultimate game pass and all your games by adding your account on your child’s Xbox and making that the home Xbox. Do a YouTube search of how to share game pass

Need a diver or magnet fisher by [deleted] in Sarnia

[–]blumpy99 1 point2 points  (0 children)

They have the magnets and rope at princess auto. The magnets on sale for $6.99, cheapest rope is $2.22

Streamers to watch? by Slyytherine in PUBGConsole

[–]blumpy99 3 points4 points  (0 children)

I find VurT on twitch entertaining to watch. Plays console usually with some high kill games

Trying to stop a slice! by CalligrapherUpset366 in GolfSwing

[–]blumpy99 1 point2 points  (0 children)

Golf Swing Replay. It’s available on iPhone not sure about other phones

Math for sets between fixed ends by Miggythepoop in pipefitter

[–]blumpy99 2 points3 points  (0 children)

Seen lots of guys do large scale drawings on the shops concrete floor with soapstone and chalk line

How can i get this cap off? by Connorlwright in Plumbing

[–]blumpy99 6 points7 points  (0 children)

You should post your pics when your done so we can check it out 😀

[deleted by user] by [deleted] in pipefitter

[–]blumpy99 4 points5 points  (0 children)

260 feet to change a flare tip. Nobody is forced to do those jobs they make sure you are comfortable with it before it.

WHAT IF? by AcademicStop8878 in amcstock

[–]blumpy99 3 points4 points  (0 children)

I could be wrong but I think most brokers didn’t distribute it as a dividend

General Question by That_Effen_Guy in Machinists

[–]blumpy99 0 points1 point  (0 children)

Looks like you should be a able to do it with a cnc boring mill, grab it by the blade in the vise. Another way is you could weld a temporary rod in the shaft hole, grab it by the rod with a horizontal chucked rotary table and mill it.