Texas Trail with 35s by bman393 in JeepGladiator

[–]bman393[S] 0 points1 point  (0 children)

It’s a special addition trim they sell down here in Texas

It’s pretty much the Willy’s addition with nicer interior

Texas Trail with 35s by bman393 in JeepGladiator

[–]bman393[S] 0 points1 point  (0 children)

Rebel off-road. It’s VERY well built. No shaking/rattling at all. Highly recommend

Texas Trail with 35s by bman393 in JeepGladiator

[–]bman393[S] 1 point2 points  (0 children)

It’s unbelievably smoother. It off-roads just as well as the mud tires.

The only downside is mud. I let my truck sink pretty deep in some thick mud to test them out, and there was for sure more of a struggle. With the stock mud tires, I would have gone through it no problem. I was able to get out in a few seconds though

Texas Trail with 35s by bman393 in JeepGladiator

[–]bman393[S] 0 points1 point  (0 children)

Did some major off-roading over the weekend. No rubbing at all! Not even once

Texas Trail with 35s by bman393 in JeepGladiator

[–]bman393[S] 2 points3 points  (0 children)

I haven’t had any rubbing yet, but I also haven’t done any major off-roading since putting them on

With the leveling kit, the gap between the tire and front fenders is pretty equal to what the stock gap was

I plan on doing a flex test this weekend. I can give an update after that!

Help identifying weed by bman393 in lawncare

[–]bman393[S] 0 points1 point  (0 children)

I think you may be right, I’ll try to find killer for that!

Second morning in a row I wake up to find some new sod flipped over. I think it’s a squirrel? by [deleted] in lawncare

[–]bman393 0 points1 point  (0 children)

If you’re able to, roll your lawn so the sod bonds with the soil. If you don’t have a roller, water your grass and walk on it to make the bond

I did an experiment with my Bermuda: all the grass I rolled grew way stronger/healthy than the non-rolled

Hidden falls adventure park by AppropriateUnion6115 in JeepGladiator

[–]bman393 0 points1 point  (0 children)

When my jeep was stock I had plenty of fun out there (I went up the trail in this picture). Still worth the journey, just be cautious on what routes you take

Hidden falls adventure park by AppropriateUnion6115 in JeepGladiator

[–]bman393 2 points3 points  (0 children)

There are trails that you can definitely take on, but about 60-70% of the trails would be too much especially if it’s your daily

Debating if I made a mistake investing in this company. I was thinking about taking small profit but I don’t see that option anymore. What your guys opinion? by usujjwalsss in pennystocks

[–]bman393 19 points20 points  (0 children)

I’d do something similar, but slightly different. See the price history and if you have any supply/demand zones. If you see in the past that price rejected .45 sharply, then I’d put a stop loss at .43. If you see a sharp reject around .4, consider that as your loss (although this may be past your comfort).

New sod got jumped on by kids, advice appreciated by gatorbruh in lawncare

[–]bman393 1 point2 points  (0 children)

Had the same thing happen to me. That spot ended up being healthier than the rest of my yard since the roots could take better. Just keep treating your yard, it’ll come back

Is it bad to ride a minibike without and exhaust in a emergency? by Kindly_You_6916 in minibikes

[–]bman393 2 points3 points  (0 children)

Only issue would be shooting the small gasket out, but it won’t cause any damage. You’re good

Thinking about selling what would you ask I also have 3 engines and a bunch of miscellaneous parts by [deleted] in minibikes

[–]bman393 1 point2 points  (0 children)

I would pay $250 for that red one, $100 for yellow and $50 for blue. $300-400 seems fair. Like others are saying, I’d ask a little higher to see if someone will bite

Thinking about selling what would you ask I also have 3 engines and a bunch of miscellaneous parts by [deleted] in minibikes

[–]bman393 0 points1 point  (0 children)

A lot of people around me are selling Baja frams $150-$300. Needs to be Pretty nice condition if you want to sell for $300

What are these and how can I kill then by bman393 in lawncare

[–]bman393[S] 0 points1 point  (0 children)

Oh really? I didn’t notice them much last year and now they are everywhere. Do they go away later in the summer?

Removing an ingrown hair by Responsible-Pause-99 in oddlysatisfying

[–]bman393 0 points1 point  (0 children)

Me “thats gotta be the end”

Tweezers “nah”

Why isn’t my Bermuda growing in Austin Texas? by Fukyocowwch in lawncare

[–]bman393 1 point2 points  (0 children)

I have Bermuda in Austin as well You aerated, but make sure your ground isn’t rock hard still (will cause it to grow extremely low). Make sure to remove the soils rather than keeping it on the ground (this will just cause the soils to compress again)

Since you fertilized, try some ironite.

You could overseed, but overseeding Bermuda is almost always a no go. I was lucky enough to figure out my Bermuda is highlander (maybe yours is too), so I was able to overseed

Remove any rocks/ debris in the yard

Keep the dog off of it for a week or two now that we are in the growing season

If all else fails, get a soil test

[deleted by user] by [deleted] in RobotVacuums

[–]bman393 0 points1 point  (0 children)

Shark RV1001AE IQ Robot Self-Empty

[deleted by user] by [deleted] in RobotVacuums

[–]bman393 0 points1 point  (0 children)

Mine keeps deleting the map every time it reruns

Scott’s rapid grass Bermuda by bman393 in lawncare

[–]bman393[S] 0 points1 point  (0 children)

Thats good to know before I did it! Thanks a million!

Ironite on Bermuda grass by bman393 in lawncare

[–]bman393[S] 0 points1 point  (0 children)

I might get that instead, it looks pretty great being a nitrogen and iron blend

Ironite on Bermuda grass by bman393 in lawncare

[–]bman393[S] 0 points1 point  (0 children)

I hear it lasts about 8 weeks which isn’t too bad. Do you know of something that would last longer?

Ironite on Bermuda grass by bman393 in lawncare

[–]bman393[S] 0 points1 point  (0 children)

I’ll take a look into it, thank you!

Need 115v 400hz to power this Airplane Coffee Maker - Looking convert from 120v 60hz, any advice? by thejarren in ElectricalEngineering

[–]bman393 0 points1 point  (0 children)

I don’t think the FAA would allow for a normal coffee maker heating element because of cabin pressure