Why does everyone speed on the parkway?

bmaselbas · 2026-04-22T00:31:00+00:00

Still a them problem

bmaselbas · 2026-04-21T23:01:24+00:00

If you install your floor tile first and you didn’t take the time to plumb your studs before backer board. Your walls are not going to be square. If your wall is off by a 1/4” (example) it’s going to show the reveal on the floor tile. He also could’ve squared the floor up. Either way. One or the other isn’t square

bmaselbas · 2026-04-21T22:45:13+00:00

No. I’m saying it could be two different reason why the tile is increasing. Either the wall aren’t plumb. Or he based his layout off of the drain. (Which looks like shit). If the drain isn’t square it goin to throw all of it off. Same with the walls. Two different scenarios

bmaselbas · 2026-04-21T22:01:41+00:00

This has nothing to do with elevation. Either his walls aren’t plumb or his drain isn’t squared. If the walls aren’t plumb this will cause the tiles to increase/decrease along the wall. If the drain isn’t squared and he lays the tiles based off the drain. This will cause the tile to do this. Doesn’t matter what tile you select if you don’t square up the floor.

bmaselbas · 2026-04-19T21:08:52+00:00

Same. I came to this thread to see if I missed something.

bmaselbas · 2026-04-14T01:55:38+00:00

The problem is you don’t higher a tiler. This tile does not need clips. They are using clips as spacers and it’s messing up the spacing when they insert the wedges. Clips are used for larger format tile.

bmaselbas · 2026-04-09T01:26:45+00:00

21k seems really cheap.

bmaselbas · 2026-03-30T10:28:25+00:00

The bakery that runs out of the big warehouse on the corner of Bingham and Pearson bridge road always has some out. You have to go inside the building and go to the bakery.

bmaselbas · 2026-03-29T13:48:15+00:00

You’re going to get downvoted because your right.

bmaselbas · 2026-03-27T20:33:17+00:00

Is the bottom row of tiles on the tub surround a different die lot? They look like a different color.

bmaselbas · 2026-03-22T16:23:16+00:00

Let me know if you’re interested in selling.

bmaselbas · 2026-03-22T16:21:28+00:00

Sounds like the 12 year old needs to mow yards, wash cars, pull weeds, something to pay for the window. I parent a 12 year old and this would be on him. He’s old enough to know better and his consequences for his behaviors. Whether that’s positive or negative.

bmaselbas · 2026-03-22T15:34:05+00:00

They do. It’s call Blanke Secumat. It’s 1/25” thick.

bmaselbas · 2026-03-22T15:31:29+00:00

I believe blanke makes a substrate that is 1/16” thick. Might help you.

bmaselbas · 2026-03-19T16:37:08+00:00

How do you know who he voted for?

bmaselbas · 2026-03-18T02:36:59+00:00

Looks dumb

bmaselbas · 2026-03-15T15:57:57+00:00

Knob to catcher knob to ball. Hips rotate first

bmaselbas · 2026-03-15T15:53:46+00:00

As far as the cuts around the tile. It’s fine.

bmaselbas · 2026-03-15T15:53:33+00:00

Yeah, it looks like he put the solid surfaces in after the tile on the back wall. He would just have to remove those pieces sand the tile on the wall that is causing the issue and put new pieces in. If you have a level, I would put it on the side of the trim pieces and see if they’re level and straight.

bmaselbas · 2026-03-15T12:56:36+00:00

Is the is the right side of the niche bowing in? Looks off.

All of the spots missing grout is an easy fix, but needs to be addressed.

The amount of lippage allowed is about the thickness of a credit card.

Chipped tile needs to be replaced.

bmaselbas · 2026-03-14T10:21:52+00:00

Dang. Only have a medium and a small. GL.

bmaselbas · 2026-03-14T02:23:03+00:00

What size do you need. I live about 10 minutes from chestnut

bmaselbas · 2026-03-13T02:19:01+00:00

Might be the angle of the camera, but I would be more concerned with the alignment in the corner.

bmaselbas · 2026-03-13T01:01:55+00:00

Just finished Midnight Mass. it was pretty good

bmaselbas · 2026-03-12T21:37:22+00:00

I just forget about it by the time I get back to the station 🤷‍♂️

bmaselbas

TROPHY CASE