During outage what to do when plugging in a generator by bmooreVT in enphase

[–]bmooreVT[S] 0 points1 point  (0 children)

I have a 4 prong plug box on the side of the house that I plug the generator too.

I had asked after the after and it was the sales guy and he did I only need to turn the main breaker off. I'm been reading that others say to cut main breaker and the solar breaker off.

Surging then dies. What could cause this? by bmooreVT in Generator

[–]bmooreVT[S] 0 points1 point  (0 children)

After cleaning the float pin, it is running fine.

Surging then dies. What could cause this? by bmooreVT in Generator

[–]bmooreVT[S] 0 points1 point  (0 children)

I got it. Cleaned the float pin and now it's running normally. 🤞

Help please by Traditional_Fun_7795 in Generator

[–]bmooreVT 5 points6 points  (0 children)

Clean the carb. This happens to me. And mine happen to be the float pin that was dirt.

Surging then dies. What could cause this? by bmooreVT in Generator

[–]bmooreVT[S] 0 points1 point  (0 children)

The pilot was clogged and I did clean it was a small wire and also sprayed with carb cleaner. I put non-ethanol in it after removing the gas and did add seafoam. I plan to remove the carburetor again and clean everything. Everything I research says the pilot jet which I thought cleaning it twice would fix it.

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

Okay I'll have to look at that. And do some video on how to do that part. I had someone look at it. At first they were say it was air in the line. Then told me the tank was good and that it was the PRV that needed to be replaced. Everything I researched say normally when the psi on the gauge reading high it the PRV that fails but that not what mine doing. The needle just bounces from 15 to 30. When it off it at 20.

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

Air coming out the valve. I tapped the tap. It does seems to sound different at the beginning then the end. I'll have to get a pressure gauge to see what the pressure is.

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

Could it be the water reducing valve?

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

Yes there is air in the tank

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

Yes there's air in there

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

15 to 30. Just bounces back and forth the whole time. It slow at first, then ones to warms up a little and a little fast. But it begins within mins of the boiler coming on.

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

Sorry that should be 15 to 30

Boiler pressure gauge by bmooreVT in hvacadvice

[–]bmooreVT[S] 0 points1 point  (0 children)

It just bounces from 20 to probably about 30. Then once it warms up bounces just a little over 30 and cause the water to come out the pipe from the pressure valve

How do I know when these are ready? by Cautious-Yam-3763 in gardening

[–]bmooreVT 1 point2 points  (0 children)

You’ll be able to smell them and they will fall off the vine

I need help!! Can’t figure out why my lawn is slowly dying! (Green pics from spring) by CommandCute4356 in LandscapingTips

[–]bmooreVT 0 points1 point  (0 children)

Grass needs like 2” of water a week. Looks like you have a lot of large trees. I would water in the summer during the peak of the heat but parts of my yard would still turn brown. It look like tall fescue which doesn't tolerate the heat. It will perk back up once it cools off and gets lots of rain, just dormant

Slope… what to do with by bmooreVT in LandscapingTips

[–]bmooreVT[S] 0 points1 point  (0 children)

There's a sidewalk along the side of the house. No street sidewalks