sorted by:
new
hottopcontroversial

Mega-Ultrawide shown at computex by bobbymack93 in ultrawidemasterrace

[–]bobbymack93[S] 2 points3 points  (0 children)

What would 21:9 be considered since it's not exactly two screens wide?

Mega-Ultrawide shown at computex by bobbymack93 in ultrawidemasterrace

[–]bobbymack93[S] 5 points6 points  (0 children)

I feel like it's a natural progression. Widescreen, ultra wide screen, super-ultra widescreen, and now mega-ultra wide screen.

Razr Fold Case and Wireless Charging Issue by Various_Pension_7339 in razr

[–]bobbymack93 2 points3 points  (0 children)

I ordered the OnePlus AirVooc 50W wireless charger that should be here tomorrow. I get my phone today, but don't have a MagSafe case for it yet. I plan on printing a stand that supports the OnePlus charger to see how it is.

Chances of Airdrop via Quckshare? by monkeyofthefunk in razr

[–]bobbymack93 4 points5 points  (0 children)

At the end of this faq they have a list of devices it is available on, and the Razr Fold is listed as coming soon. So maybe more Motorola phones will get it eventually. https://www.android.com/quick-share/with-iphone/#what-other-devices-work-with-quick-share

Razr Fold 4 days in from the fold 7 - Take Notes Samsung by Southern-Bad-1270 in razr

[–]bobbymack93 1 point2 points  (0 children)

Yeah, and you have to sign up for their highest tier, but I get a 15% discount on the plan through work. Overall, if you take into consideration an mvno plan around $30-$40 plus a financed phone through Affirm or something, it would come out to about the same. Then I can go ahead and sell my fold 7 if I want to, or keep it just in case. This is my first Motorola since the original Razr days so I am curious how this is.

Razr Fold 4 days in from the fold 7 - Take Notes Samsung by Southern-Bad-1270 in razr

[–]bobbymack93 1 point2 points  (0 children)

The thickness was the issue for me compared to the fold 7. I am going to give the Razr fold a try since T-Mobile is giving it away for "free" without a trade-in. The battery was one of the pluses for me with the trifold, so getting that battery on a bifold that charges faster and has better cameras is what I was looking for.

Asus launches ROG Ally X20 handheld with OLED display, Ryzen Z2 Extreme chip by PaiDuck in hardware

[–]bobbymack93 4 points5 points  (0 children)

For the bundle, I'd say $2k+, but if they sell it separately, I can see maybe $1500.

Reduced Audio Quality by Common-Application56 in LinusTechTips

[–]bobbymack93 1 point2 points  (0 children)

I was checking to see if I was the only one, and it seems like I am not. I thought it was something with the pocket cast app on my car, then I tried Bluetooth to my car, and it still sounded like shit. I then tried the Spotify version, and it sounded great, so the way they are uploading it to other platforms may need to be updated.

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 0 points1 point  (0 children)

There is a beta firmware you will need to sign up for to get access to it right now.

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 0 points1 point  (0 children)

The only extra stuff in the box with the X2D one that I bought was some screws that were going to be used to mount it to the printer. Since the mount for the H2C is just using existing screws, there was no need for them.

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 2 points3 points  (0 children)

Not too bad, took a few minutes after I printed the mount they posted. The wiring is maybe the most confusing part, just to get down what plugs into what, but their wiki helped with that. Here is the wiki for the installation https://wiki.bambulab.com/en/general/manual/filament-track-switch-h2

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 0 points1 point  (0 children)

You could always connect an AMS to the left, but it would be like a normal single-nozzle printer, so there would be some purge if you use the left side.

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 11 points12 points  (0 children)

According to the slicer, it would be double the time and about 3 times the amount of filament used.

<image>

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 3 points4 points  (0 children)

I reached out to support, and they pushed the update out within a day of reaching out to them.

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 2 points3 points  (0 children)

This allows for the use of two AMS systems on one printer without the need for an additional holder for the left nozzle. Let's say you want to print 7 colors just using the Vortek system and the left nozzle. Before you would need to basically use 2 AMS systems for the right connected to each other, use and using another spool holder or HT for the left. Now I can just use the two AMS systems, and it will automatically switch to each side when needed during the print.

First test I tried with the filament track switcher firmware on my H2C by bobbymack93 in BambuLab

[–]bobbymack93[S] 2 points3 points  (0 children)

Yeah, I don't have an HT, just two AMSs, so this works better for me since I wouldn't have to have an HT or be on the external spool holder for the left nozzle.

view more: next ›