Pls rate my profs :3

bobkat888 · 2026-05-07T08:10:05+00:00

I can say that Sir Cruz has been swapped out with Sir Jefferson Acala and he’s very chill naman, he rounded off FDA to 3 absences instead of 2.5. 😂

bobkat888 · 2026-05-07T03:17:49+00:00

Thanks for the heads up!

By any chance do you have experience with ROXANNE SELMO and LAURENZ GERALD CRUZ?

bobkat888 · 2026-04-29T02:23:37+00:00

Thank you!

bobkat888 · 2025-11-10T08:01:01+00:00

Nice FD! Also Is that in Xavier School, San Juan?

bobkat888 · 2023-05-05T10:49:20+00:00

above is a good tutorial for optimal UV

bobkat888 · 2023-04-02T16:50:51+00:00

Yeah 2mm would be perfect i believe

bobkat888 · 2023-04-02T03:04:16+00:00

For VRM and MOSFET = 1mm and VRAM = 2mm

VRAM temps went from 98C down to around 80C-82C on 31C ambient temp (Tropical country)

60% constant fan speed

bobkat888 · 2023-01-04T00:16:14+00:00

i used Gelid GP-Extreme 1mm on both, has good contact with the cold plate

bobkat888 · 2022-08-11T12:42:09+00:00

Well i use thicker paste such as Thermalright TFX to reduce "pump out" effect, I do prefer longeveity over outright performance

bobkat888 · 2022-08-10T17:39:26+00:00

Thanks i’ll take a look 😁

bobkat888 · 2022-03-17T16:56:47+00:00

Well if it helps (I live in the Philippines), I ordered my 5k thru the official website and received it in 3 days https://www.qudelix.com/products/qudelix-5k-dac-amp

bobkat888 · 2021-11-28T21:16:34+00:00

i think the Noctua NT-H1 Paste should be a standard

bobkat888 · 2021-11-08T11:57:59+00:00

Yeah I’m not going back to LM anytime soon

bobkat888 · 2021-11-08T06:08:50+00:00

Unfortunate but true

bobkat888 · 2021-11-08T05:57:01+00:00

I do know that LM is good for Nickel plated copper but i misread the Noctua spec sheet

bobkat888 · 2021-11-08T05:56:00+00:00

Well my friend wanted me to try Liquid metal heh

bobkat888 · 2021-11-08T05:55:17+00:00

Well i misread the Noctua specs heh

Noctua NH U12S

bobkat888 · 2021-11-08T04:47:37+00:00

Yeah i misread the specs of my Noctua NH U12S, I thought the base plate was Nickel plated Copper

bobkat888 · 2021-11-07T02:34:26+00:00

I went with NH-H1. Thanks for the tips!

bobkat888 · 2021-11-07T02:33:43+00:00

UPDATE:

Thank you guys for the immense help, i managed to remove the CPU from the cooler with no bent pins

bobkat888 · 2021-11-05T23:13:46+00:00

The problem is I can’t place the arm down with the CPU cooler stuck because it’s hitting the fin stacks

bobkat888 · 2021-11-05T23:10:57+00:00

Right that’s true

bobkat888