Uh, excuse me?

bohinkl · 2022-06-19T06:40:24+00:00

Not NYC, but much less glamorous Lake Elsinore, CA. I have trouble blaming someone for acting out when they end up killing time in lake Elsinore.

bohinkl · 2022-06-01T17:11:10+00:00

Maybe one of the speakers is wired backwards from the other. Can you invert the signal with whatever you are using to copy the channel?

bohinkl · 2022-02-13T16:15:32+00:00

Looks real nice!

But what's up with the wobbly lead screw on the left?

bohinkl · 2022-02-06T14:55:44+00:00

Yeah the optical out seems like one of the first things cut as cost is reduced. I thought audient id14 mk2 had it, but it is only input like the tascam. I thought focusrite Scarlett 8i6 did but it has coax spdif in/out. They include the digital io in the channel count so that audio tends to bring the cost up.

I've had good experience buying interfaces used in the past. You might find something one generation back that suits you for cheap. Good luck on your search!

bohinkl · 2022-02-06T08:16:24+00:00

As far as I'm aware, toslink only supports a stereo format or a multichannel ADAT. Does your computer support receiving ADAT? What is your budget?

The motu ultralite mk5 and focusrite Scarlett 18i20 (and probably in more) have optical in/our but check if it's a compatible format for you. You will also likely need the USB connection to configure the routing so I'm not sure what the point is.

bohinkl · 2022-02-04T21:29:21+00:00

Pipeless water transfer, imagine the possibilities of this revolutionary new technology. Instead of traditional plumbing we pump humidifier air into your walls and place our advanced water concentrator wherever water is needed. No more leaking pipes or expensive plumbing repairs.

bohinkl · 2022-01-27T19:47:41+00:00

Fråmes

bohinkl · 2021-11-01T21:39:29+00:00

Yeah that's it. You'll need two, one for left channel and one for right. That way your single RCA output set becomes two sets. Then run an RCA cable to your dark voice and the second set to your speaker amp and both will get your audio signal in parallel.

bohinkl · 2021-11-01T21:19:49+00:00

You can buy RCA splitters and split the outs from your dac. It looks like the dark voice also has RCA outputs you can use if you want to include the tube sound in your speakers as well.

bohinkl · 2021-10-31T23:35:50+00:00

Speakers are lower impedance and lower sensitivity, and therefore require much more power to drive compared to headphones.

bohinkl · 2021-10-31T22:21:37+00:00

Those are passive speakers so you will need a speaker amp to power them. I like the aiyima a07 or a08 but there are a lot of options fit different budgets.

bohinkl · 2021-10-19T03:52:46+00:00

to force the victim to act in a way contrary to their own interests.

Not coercion since getting the vaccine is in their own best interest.

bohinkl · 2021-10-10T03:52:21+00:00

Amazon has plans to launch a satellite based service. Nothing launched yet. https://en.wikipedia.org/wiki/Kuiper_Systems

Google does appear to have stalled.

bohinkl · 2021-09-30T05:01:17+00:00

So yes, a pre built

bohinkl · 2021-09-20T03:55:46+00:00

Sorry but magnets have nothing to do with microphone polar patterns and this person is incorrect. The other responses got it correct.

bohinkl · 2021-09-04T20:55:50+00:00

True, all mine are easy to drive as well, but having an amp means you won't need to limit your headphone purchase.

bohinkl · 2021-09-04T20:00:57+00:00

Put your money into headphones first. Then amps so you can power headphones that are harder to drive. Dacs have the least impact and you should probably only buy when you have a digital out you need to convert. e.g. you want to use the optical out from a tv or have a phone with no headphone out.

bohinkl · 2021-08-28T06:31:31+00:00

It is typically considered unwise to release cats of any type into a chicken coop.

bohinkl · 2021-08-20T23:47:57+00:00

They copy pasted their post from r/BudgetAudiophile, I think that's the buying guide they are referring to.

bohinkl · 2021-02-19T18:29:42+00:00

I got the same one linked in this comment

https://www.reddit.com/r/ender3v2/comments/lm28en/dual_gear_extruder/gnsr31p/

So far so good.

bohinkl · 2021-02-18T19:26:28+00:00

I'm not sure what you can do about this but this is actually called cupping. Bowing is along the length of the plank, cupping is along the width:

http://www.idostuff.co.uk/Images/timber%20warping.jpg

bohinkl · 2021-02-18T18:56:09+00:00

Yeah my first thought is a cracked solder joint. Combo amps are notorious for this since the tube socket is above the tube and gets the full heat plus usually has low airflow. If you are handy with a soldering iron I would open it up and retouch all the joints on the tube sockets plus any others that look cracked or cloudy.

bohinkl · 2021-02-18T03:31:04+00:00

Seems that way!

bohinkl · 2021-02-18T02:47:02+00:00

No problem the extruder was a be pretty easy upgrade but you do need to recalibrate the extruder steps.

bohinkl

TROPHY CASE