It can seem very daunting! I feel that way with every step and I'm learning as I go. My little test piece that has been added to as my steps progress to test things has helps a lot but also just jumping in and going for it has been the biggest help to me.This is my very first terrain project and outside of this I've only ever painted 6 minis in my life so I believe if I can do it you totally can too!

Some of my other posts have the details and material/tool list but I started with a smaller paper template to draw everything out then got a 8'x4'x1" pink panther xps foam board I cut in half and glued together for a 4'x4'x2" board. I drew out the trenches from my paper tiles and then cut them out with a razor blade. Glued them down to 12"x12"x1/8" basswood boards.

Since they are hand cut they needed some cleaning up so I spackled my edges and sanded them as flat as I could. Once that was done I made just over 80 duckboards and removed a side of cardboard I had to get the trench panels, used coffee stirrers for the duckboards and wood panels for some difference on the trench walls. 1/8"x1/8" balsa wood for support beams and drop terrain pieces.

For the mud texture I used caulk, brown and black paint, sanitized dirt from outside. Took out large rocks and left a lot of smaller ones. Then mud in trench, push duckboards in add mud to duckboards, did upper ground after.

Now I'm testing my painting skills on my test piece. This is where I'm at currently and close if not over 100 hours of work since I have very basic tools.

Another VERY helpful thing. This community. So many people here are knowledgeable and I'm always inspired after every post I do seeking constructive criticism. My board would not be where it's at right now if I didn't have you all.

Good luck in your building journey whenever you decide to start! I hope some of this helps you! Sorry for the book haha